Keytek CEMaster EMC/EMI Immunity Test Simulator

Keytek CEMaster EMC/EMI Immunity Test Simulator
Enlarge Image
Request Quote Print Page
Brochure

The Keytek CEMASTER EMC / EMI Immunity Test Simulator is a customer configured tester that allows you to use a system specific to your needs and budget. It provides compliance-level testing to IEC 1000-4-X Series Immunity Standards. Starting with a base platform, you add only the functions outlined in your product test plan. If, in the future, your testing requirements change, your CEMASTER may be upgraded to incorporate the additional functions required to meet your testing parameters.

 

General Specifications:

Test Type Model Standard Feature Range
ESD CM-ESD IEC 1000-4-2 Peak Air Discharge 500V-8.8kV
Peak Contact Discharge 500V-4.4kV
Repetition Rates Single Shot, 1 pulse/sec and 20 pulses/sec
Waveform  
EFT CM-EFT IEC 1000-4-4 Peak Voltage 250V-2.5kV
Frequency 1-100kHz
Waveform  
Surge CM-SURGE IEC 1000-4-5 Voltage Waveform 1.2/50µs
Peak Voltage 250V-2.5kV
Current Waveform 8/20µs
Peak Current 125A-1.25kA
Waveform  
Repetition Rate To 6 per minute at 500V
Power Frequency Magnetic Field CM-HPWR IEC 1000-4-8 Field Frequency 50/60Hz
Magnetic Field 0.5A/m - 4A/m
Pulse Magnetic Field CM- HPULSE IEC 1000-4-9 Field Pulse 8/20µs
Amplitude Field 50A/m - 800A/m
Test Parameters  
Dips & Interrupts CM-PQF IEC 1000-4-11 Dips 70%, 40%
Interrupts 0% (Short or Open)
Transition Time 1µs - 5µs
Inrush >250 Amps @ 120V
>500 Amps @ 240V
AC Mains Monitor 0 - 265 VAC
Test Parameters  
Power Requirements Input Voltage: 90 - 250VAC
Input Current: 1A @ 120V; 0.5 @ 240V
Coupler/Decoupler Range AC Voltage Ratings: 50 - 250VAC
AC Current Ratings: 10A continuous, >16A start-up
DC Voltage Ratings: 0 - 100VDC
DC Current Ratings: 10 Amps
Physical Dimensions: 7.0" H x 18.5" W x 22" D
Approx. Weight: 64 lbs