Ludeca ALIGNEO Laser Shaft Alignment Tool

Rent Ludeca ALIGNEO Laser Shaft Alignment Tool
Enlarge Image
Request Quote Print Page
Brochure
The Ludeca Aligneo Laser Shaft Alignment Tool offers both precision alignment and timesaving convenience expected of a laser precision measurement system. Its intuitive operation, well thought-out design and the loaded features make Aligneo a necessary device in the maintenance world when it comes to the alignment of pumps, motors, gearboxes and compressors. The achieved resolution of a micron increases the overall precision, leading to more accurate alignment. Aligned machines reduce the load on the shafts dramatically, resulting in increased machinery life, extended machine availability and increased saving on maintenance costs.


Features:

  • Static measurement mode – requires any 3 of the 8 available 45° measurement positions
  • UniBeam® – for quick adjustment of the single laser beam
  • Coupling and foot results displayed in both numerical and graphical format
  • Live monitoring of horizontal or vertical machine corrections
  • Soft foot check – measure, correct and save results
  • Alignment of 6-feet machines
  • Alignment of nonrotatable and uncoupled shafts
  • Measurements unaffected by coupling backlash
  • Save up to 10 measurement files
  • Automatic data protection in case of power interruption
  • Pre-assembled brackets designed for quick and rigid set-up
  • Protected against dust, water and grease in compliance with classifications IP 65 and IP 67
  • PC freeware ALIGNMENT REPORTER for measurement file backup and printing reports

Specifications:


Control unit
  • Display
    • Fixed segment LCD display
    • Dimensions: approx 94 x 73 mm [3.7” x 2.9”]
  • Keyboard: Robust, membrane keyboard
  • Enviromental protection: IP 65 (dust-tight, protected against water jets)
  • Intrinsic safety [optional]
    • II 2 G Ex ib [ib] IIC T4, Zone 1
    • Certificate numbers: TÜV 08 ATEX 554147, IECEx TUN 08.0004
  • Operating temperature
    • 0°C to 55°C [32°F to 131°F]
    • Intrinsically safe versions 0°C to 50°C [32°F to 122°F]
  • Power supply
    • 4 x 1.5V IEC LR6 (“AA”) batteries (rechargeables permitted)
    • For intrinsically safe versions only use 1.5 V “AA” MN 1500 from Duracell
    • or AccuCell AC 1800 rechargeable batteries
  • Battery life (alkaline)
    • 25 hours – based upon an operating cycle of 50% measurement and
    • 50% ‘sleep’ mode
  • Interfaces
    • 1 x sensor; 1 x printer/PC (serial)
    • For intrinsically safe versions – 1 x sensor; 1 x PC
Transducer
  • Details
  • Measurement principle: Coaxial, reflected laser beam
  • Enviromental protection: IP 67 (submersible, dustproof)
  • Ambient light protection: yes
  • Storage temperature: -20°C to 80°C [-4°F to 176°F]
  • Operating temperature: 0°C to 55°C [32°F to 131°F]
  • Intrinsically safe versions 0°C to 50°C (32°F to 122°F)
  • Intrinsic safety [optional]
    • II 2 G Ex ib op isb IIC T4, Zone 1
    • Certificate numbers: TÜV 07 ATEX 554148, IECEx TUN 08.0003
  • Laser
    • Type: Ga-Al-As semiconductor laser
    • Wavelength (typical) 675 nm (red, visible)
    • Safety class: Class 2, FDA 21 CFR 1000 und 1040
    • Beam power: < 1 mW
    • Safety precaution: Do not look into laser beam
  • Detector
    • Measurement area: unlimited, extendible (U.S. Patent 6,040,903)
    • Resolution: 1μm
    • Accuracy (average): > 98%
  • Inclinometer
    • Measurement range: 0° bis 360°
    • Resolution: <1°
Reflector
  • Details
    • Type: 90° roof prism
    • Accuracy (average): > 99%
    • Enviromental protection: IP 67 (submersible and waterproof)
    • Storage temperature: -20°C to 80°C [-4°F to 176°F]
    • Operating temperature: -20°C to 60°C [-4°F to 140°F]
    • Dimensions: approx 100 x 41 x 35 mm [4”x1 5/8”x1 3/8”]
    • Weight: approx 65 g [2½ oz.]

Options:
  • Automatic continuous measurement as shaft is rotated – start and stop rotation at any position
  • TolChek® – automatic evaluation of alignment condition
  • Ability to enter alignment targets and thermal growth values
  • Fixed feet selection – resolves base-bound and bolt-bound problems
  • InfiniRange® extends detector measurement range to handle gross misalignment
  • Multipoint mode – measurement at any 3 or more positions over 60° rotation or wider
  • Alignment of vertical and flange mounted machines
  • Alignment of spacer shafts
  • Ability to save either 25 or 99 measurement files
  • An attractive package consisting all features
  • The PC Software ALIGNMENT CENTER provides the perfect solution for preparing, analyzing, organizing, archiving and printing professional colour reports