Magna Power TSD600-128 Programmable DC Power Supply 600 V, 128 A

Rent Magna Power TSD600-128 Programmable DC Power Supply 600 Volts, 128 Amps
Enlarge Image
Rent Magna Power TSD600-128 Programmable DC Power Supply 600 Volts, 128 Amps Rent Magna Power TSD600-128 Programmable DC Power Supply 600 Volts, 128 Amps Rent Magna Power TSD600-128 Programmable DC Power Supply 600 Volts, 128 Amps
Magna-Power Electronics TSD600-128
Request Quote Print Page
Datasheet
The Magna Power TSD1200-64 Programmable DC Power Supply 600 Volts, 128 Amps provides a high voltage and current range. The TS Series IV covers voltages up to 600 Vdc and current levels up to 16 Adc. This model is the TSD600 connected in parallel to provide the high current. In addition, there are several special low voltage high current models, enabling a more cost-effective solution for these requirements.

All TS Series IV power supplies come standard with isolated 37-pin external I/O, RS232, Remote Interface Software, IVI drivers for integration into a variety of programming environment Three front panel types are available for maximum application flexibility. The A Version provides front panel control and calibration, start and stop buttons, and a digital display for voltage and current. The D Version front panel adds a 10-key digital front panel entry, memory sequencing, and modulation capabilities for non-linear output profile emulation.
 
Options:
  • 208/240 Vac Single-Phase Input (SP) (5 kW Only)
  • Cabinet and Integrations (+CAB1, +CAB2, +CAB3)
  • High Isolation Output (+ISO)
  • High Slew Rate Output (+HS)
  • IEEE 488.2 GPIB Interface (+GPIB)
  • LXI TCP/IP Ethernet Interface (+LXI)
  • Photovoltaic Power Profile Emulation (+PPPE)
  • RS-485DSS Interface (External) (+RS485)
  • UID47: Universal Interface Device (+UID)
  • USB Edgeport Interface (External) (+USB)
  • Water Cooling (+WC)
 
Magna-Power Electronics TSD600-128 Specs
Line Regulation: Voltage Mode: ± 0.004% of full scale
Current Mode: ± 0.02% of full scale
Load Regulation: Voltage Mode: ± 0.01% of full scale
Current Mode: ± 0.04% of full scale
Load Transient Response: 2 ms to recover within ±1% of regulated output, with a 50% to 100% or 100% to 50% step load change
Efficiency: ≥ 86%
Stability: ± 0.10% for 8 hrs. after 30 min. warmup
Isolation: Maximum input voltage to ground: ±2500 VAC.
Maximum Slew Rate: 100 ms for output voltage change from 0 to 63%,
100 ms for output current change from 0 to 63%.
Bandwidth: 3 Hz with remote analog voltage programming,
2 Hz with remote analog current programming.
Analog Output Impedances: Voltage output monitoring: 100 ohm,
Current output monitoring: 100 ohm, +10V Ref: 1 ohm.