Milmega AS0822-100 Broadband Amplifier

Rent Milmega AS0822-100 Broadband Amplifier
Enlarge Image
Rent Milmega AS0822-100 Broadband Amplifier Rent Milmega AS0822-100 Broadband Amplifier Rent Milmega AS0822-100 Broadband Amplifier
Milmega  AS0822-100
Request Quote Print Page
Datasheet
The Milmega Limited AS0822-100 Broadband Amplifier is part of the MILMEGA Series 2000 group of Broadband Class A Solid State Microwave Amplifiers. The MILMEGA Series 2000 0.8 GHz-2.2 GHz broadband amplifiers have an award winning innovative design which utilises the latest GaAs FET and MMIC technologies. This provides an architecture with unique features and benefits which differentiate Series 2000 from other solid state amplifiers, permitting an impressive array of input/output and sample port options and cost-effective power or bandwidth upgrades.
 
Options:
Option 1:    IEEE/RS232 control (1U high)
Option 1a:  ACOO2 Ethernet/USB/RS232 internally fitted control Fitted as standard on AS1860 & AS0860 Ranges
Option 2a:  Front panel RF sample port SMA-f for a single band unit (SMA-f)
Option 2b:  Front panel RF sample port SMA-f for a dual band unit. (SMA-f)
Option 3a:  Front panel RF sample port N-type-f for a single band unit (N-type-f)
Option 3b:  Front panel RF sample port N-type-f for a dual band unit (N-type-f)
Option 4a:  Front panel detected sample port SMA-f for a single band unit (SMA-f)
Option 4b:  Front panel detected sample port SMA-f for a dual band unit (SMA-f)
Option 5a:  Rear panel RF sample port SMA-f for a single band unit (SMA-f)
Option 5b:  Rear panel RF sample port SMA-f for a dual band unit (SMA-f)
Option 6a:  Rear panel RF sample port N-type-f for a single band unit (N-type-f)
Option 6b:  Rear panel RF sample port N-type-f for a dual band unit (N-type-f)
Option 7a:  Rear panel detected sample port SMA-f for a single band unit (SMA-f)
Option 7b:  Rear panel detected sample port SMA-f for a dual band unit (SMA-f)
Option 8:    Rear panel RF i/p o/p ports N-type-f (N-type-f)
Option 8a:  Rear panel dual RF i/p (SMA-f) o/p ports N type-f (N type-f)
Option 8b:  Rear panel RF i/p, front panel RF o/p ports N type-f (N type-f)
Option 8d:  Front panel RF i/p, rear panel RF o/p ports N type-f (N type-f)
Option 9:    Preamplifier 10dB
Option 10:  Preamplifier 20dB
Option 14:  Rack sliders (adds 1U)
Option 15:  Dual i/p o/p ports - for dual band amplifiers
Option 16:  Dual i/p ports only - for dual band amplifiers
Option 17:  Dual o/p ports only - for dual band amplifiers
Option 18:  Fault slaving
Option 19:  Invert logic IEEE
Option 20:  Dual amps both on
Option 21:  Single Phase Mains distribution box (1U high)
Option 21a:  3 Phase ‘STAR’ Mains Distribution box, (5 wire, 3U high)
Option 21b:  3 Phase ‘DELTA’ Mains Distribution box, (4 wire, 3U high)
Option 22a:  Bench case Height 3U
Option 22b:  Bench Case Height 4U
Option 22c:  Bench Case Height 6U
Option 22d:  Rack Casing with Wheels Height 12U
Option 22e:  Rack Casing with Wheels Height 16U
Option 22f:   Rack Casing with Wheels Height 20U
Option 22g:  Rack Casing with Wheels Height 25U
Option 23a:  Special In band Tuning
Option 26:     110V Power supply for high power models
Option 27:    Gain control
Option 28a:  Muting via TNC connector mounted on rear panel (No other rear panel options available if this is selected)
Option 28b:  Muting via D Type connector on rear panel
Option 29:     Pre-amp switching
 

Features:

Class leading linearity and noise specifications
  • Gain variation with temperature <0.06 dB/OC
  • IP3 typically 10 dB> P1 dB
  • Harmonics –20 dBc max
  • Spurious (max) –70dBc
  • Spurious (typical) –80 dBc
 
Max power
  • Unbeatable power density
  • Series 2000 will maintain full forward power into any load condition
  • Combiner/coupler integration as standard allows samples of incident and reflected power to be measured with virtually no loss
  • 100% tested into short and open circuit
  • Up to 250 watts in a single 3U unit
  • Consistent over greater than octave bandwidths
  • Broadband CW power output to 1 kW
 

Specifications:

Power

 

Power Consumption

1000 W
Psat(min)
100 W

Primary Power

180-260 V or 110 V *
Psat(min)
50.0dBm    
P1db(min)
89 W

Connectors

 
P1dB(min)
49.5 dBm
RF Input:
Type N female
   
RF Output:
Type N female

Noise figure(max)

6.0 dB

Gain Variation

2.0 dB

Harmonic Distortion (min)

-20 dBc