Ophir 5016A Solid State Amplifier


Need Help? Call (800) 404-2832ATEC AssuranceWorldwide Delivery
Ophir 5016A Solid State Amplifier
Enlarge Image
Ophir 5016A
Request Quote Print Page
5016A Datasheet
The Ophir 5016A Solid State Amplifier is a broadband amplification device with a frequency range of 0.8 to 2.0 GHz, an output power of 25 W and a small signal gain of +44 dB min. Ophir 5016A test instruments boost radio frequency signals, utilizing class A/AB linear power to achieve an ideal third order intercept point, high gain and dynamic range. Input VSWR protection is integrated into the system and input / output impedance reads at 50 ohms nominal. The Ophir 5016A FE ordering model comes with a front panel controller Ethernet and IEEE-488 / RS232 interfaces.   
 
Ophir 5016A Features
  • 0.8 – 2.0 GHz frequency range
  • 25 W of output power
  • +44 dB gain
  • Front panel display provides view of local system status
  • Fully protects any VSWR condition, open or short, into any phase angle
  • Remote control access via the ethernet, RS-232, or IEEE-488 communications ports
Ophir 5016A Specs
Electrical
Frequency Range 0.8 – 2.0 GHz
Saturated Output Power 25 Watts typical
Power Output @ 1dB Comp. 20 Watts min
Small Signal Gain +44 dB min
Small Signal Gain Flatness + 1.5 dB max
IP3 +53 dBm typical
Input VSWR 2:1 max
Harmonics -20 dBc typical @ 20 Watts
Spurious Signals < -60 dBc typical @ 20 Watts
Input/Output Impedance 50 Ohms nominal
AC Input Power 300 Watts max
AC Input 100 – 240 VAC, single phase
RF Input +10 dBm max
RF Input Signal Format CW/AM/FM/PM/Pulse
Class of Operation A/AB
Mechanical
Dimensions 19” x 5.25” x 20”
Weight 40 Lbs.
Connectors Type-N
Grounding Chassis
Cooling Internal Forced Air
Environmental
Operating Temperature 0º C to +50º C
Operating Humidity 95% Non-condensing
Operating Altitude Up to 10,000’ Above Sea Level
Shock and Vibration Normal Truck Transport