Sage 930A Communications Test Set

Used Sales Price: $1000
Sage 930A Communications Test Set
Enlarge Image
Sage 930A Communications Test Set Sage 930A Communications Test Set Sage 930A Communications Test Set
Request Quote Print Page
Datasheet

The Sage 930A Communications Test Set is a combination test instrument designed to meet all of the applications associated with testing Network Switching and DS1 Facilities. The standard 930A is a high performance Signaling, TIMS and Return Loss Measuring Set with a built-in DP, MF and DTMF sender.
 

Features:

  • 2- and 4-Wire Access
  • Loop & Ground Start
  • Reverse Battery
  • E&M Signaling Types I and V
  • Level and Frequency (20 Hz to 5 kHz)
  • C-MSG, C-Notch, 3 kHz Flat Noise
  • Signal-to-Noise Ratio
  • 2- and 4- Wire Return Loss
  • DP, MF & DTMF Sender with Talk Battery
  • DC Volt and Milli-ammeter
  • Wink Timing
  • Impedances 150, 600, 900 & 1200

 

OPTIONS


(Note: All options may not be available for immediate delivery.  Contact your Sales Representative for details)
 

Signaling/Supervision Options

 

  • Option 930A-01: DP, MF, DTMF Receiver/Analyzer
  • Option 930A-02: SF Supervision
  • Option 930A-37: E-911 PSAP Simulation

 

Other
 
  • Option 930A-10C: RS-232C Remote Control/Printer Interface
  • Option 930A-12: Type 105 ROTL Responder/Interrogator
  • Option 930A-13: Ring Generator (REN-3 Load)
  • Option 930A-16: -48 VDC Power
  • Option 930A-17: Remove Metallic Interface
  • Option 930A-29: Batch Mode for (Multiple).  Automatic Trunk Testing
  • Option 930A-32: Add RAM Buffer
  • Option 930A-35: Near-End Responder for HLI 125
  • Option 930A-47: Remote Audio Monitor

 

OPTIONS
(Note: All options may not be available for immediate delivery.  Contact your Sales Representative for details)

PCM Option
 
  • Option 930A-08E: DS-1 PCM Send/Receive (Single Direction) - ESF D4 Superframe
  • Option 930A-09E: DS-1 PCM Dual Direction Drop and Insert-ESF D4 Superframe
  • Option 930A-22: DS-1 & DS-0 Bit Error Rate Testing Detailed Error History.   Automatic Protection Switch Testing
  • Option 930A-24: Fractional T1 and Digital Data Services (DDS)(for use with Option 930A-08E)
  • Option 930A-25: FXO/FXS Supervision
  • Option 930A-34: Fractional T1 and Digital Data Services (DDS)(for use with Option 930A-09E)
  • Option 930A-44: Emulate T1 Customer Service Unit (CSU)
  • Option 930A-90: High Stability Clock for ESF

 

Transmission Measurement Options
  • Option 930A-06: Peak-to-Average Ratio (P/AR)
  • Option 930A-07: 3-Level Impulse Noise
  • Option 930A-18: Hits, Amplitude & Phase Jitter
  • Option 930A-19: Envelope Delay Distortion
  • Option 930A-20: 4-Tone Intermodulation Distortion
  • Option 930A-21: Absolute Delay (4-Wire only)
  • Option 930A-40: Wideband TIMS (20 Hz to 300 kHz)
  • Option 930A-44: Data Test Package - consists of Options 930A-06, -07, -18, -19, -20