Techwin TCW-605S Fiber Optic Fusion Splicer

Rent Techwin TCW-605S Fiber Optic Fusion Splicer
Enlarge Image
Techwin TCW-605S
Request Quote Print Page
Datasheet

The TCW-605S Series Fiber Optic Fusion Splicer adopt high-speed image processing technology and special precision- positioning technology, automatically finish the whole process of fiber fusion in 8 seconds typically, TFT LCD monitor displays all steps of fiber fusion clear at a glance.Widely used for SM and MM Quartz Fiber with diameter 80-150μm, coating layer diameter 0.1-1.0mm and bare fiber length 16mm more or less.Ideal tools for construction and maintenance of fiber and cable in both field and laboratory applications.


Features:


  • The rugged construction plus improved reliability by resisting shock, dust, and rain
  • 5.6 inch TFT color LCD monitor with anti-reflective coating
  • The advanced core to core fiber profile alignment system(PAS)
  • ARC Calibration FREE system    ARC Calibration sub-menu included in the Menu too, can do the ARC Calibration by Manual when necessary
  • X/Y axes was displayed or both X and Y were displayed simultaneously, Magnification up to 300 times
  • 8 seconds splicing time, 28 seconds Heat-Shrinking
  • Battery capacity was display in real time, precisely
  • Built-in high capacity battery, support 220 cycles(splicing /tube heating), to meet one days’ work
  • Long Electrode Lifetime, up to 4000 times
  • The new wind-cover design, enhance the ability to prevent the dust & wind, Max. wind velocity of 15m/s
  • Three Splicing modes: auto, half-auto, manual
  • Built-in super high-brightness LED supply convenience for night work

Specifications:


Power Supply

Alternating Current:100-240 50Hz/60Hz 30W, Direct Current: 13.5V/4.5A Built in 11.1V Li-ion battery charger and AC adaptor

Fiber Types Single mode (ITU-TG.652), multimode(ITU-TG.651), dispersion shifted (ITU-TG.653), non-zero dispersion shifted (ITU-TG.655), G657
Average Splicing Loss 0.02dB with G.652, 0.01dB with G.651 and 0.04dB with G.653 and G.655
Splicing & Heating Time Typical splicing time: 8s, Typical heating time: 30s
Return Loss 60dB or greater
Fiber Coating 100μm to 1000μm
Fiber Cladding 80μm to 150 μm
Fiber Cleave Length  8~16mm(coating diameter<250μm), 16mm(coating diameter 250~1000μm)
Program  10 units factory setting SM program, 10 units factory setting MM program, and 30 units user setting SM program, 30 units user setting MM program
Align Mode Advanced profile alignment system(PAS)
 Storage 4000 results