Tektronix MDO4034B-3 Mixed Domain Oscilloscope

Need Help? Call (800) 404-2832ATEC AssuranceWorldwide Delivery
Tektronix MDO4034B-3 Mixed Domain Oscilloscope
Enlarge Image
Tektronix Test Equipment MDO4034B-3
Request Quote Print Page
MDO4034B-3 Datasheet
The Tektronix MDO4034B-3 Mixed Domain Oscilloscope provides 4 analog channels of 350 MHz bandwidth with a 1 ns rise time. This unit offers an RF channel frequency range from 9 kHz to 3 GHz. Time coordinated analog, digital and RF signal acquisitions are available in this single instrument. Solve complicated design issues quickly and efficiently with an oscilloscope integrated into your design. Observe the frequency domain, and correlate events with the time that domain phenomena caused them. The spectrum shown in the Frequency Domain view is taken from the period of time indicated by the short orange bar in the time domain view – known as the Spectrum Time. With the MDO4034B-3, Spectrum Time can be moved through the acquisition to investigate how the RF spectrum changes over time. This can be accomplished while the oscilloscope is live and running or on a stopped acquisition.

The MDO4000B Series, in addition to its diverse applications, supplies technicians with a sophisticated interface. With traditional oscilloscope FFTs, you can typically either get the desired view of the FFT display, or the desired view of your other time domain signals of interest, but never both at the same time. This is because traditional oscilloscopes only have a single acquisition system with a single set of user settings such as record length, sample rate, and time per division that drive all data views. But with the Tektronix MDO4034B-3, the spectrum analyzer has its own acquisition system that is independent, but time correlated, to the analog and digital channel acquisition systems. This allows each domain to be configured optimally, providing a complete time correlated system view of all analog, digital, and RF signals of interest. 

The Tektronix MDO4034B-3 is the second model in the Tektronix MDO4000B Series.
Tektronix Test Equipment MDO4034B-3 Features
  • Mixed-domain analysis
    • Time-correlated analog, digital, and RF signal acquisitions in a single instrument
    • Wave Inspector controls provide easy navigation of time-correlated data from both the time and frequency domains
    • Amplitude, frequency, and phase vs. time waveforms derived from RF input
    • Selectable spectrum time to discover and analyze how RF spectrum changes over time - even on a stopped acquisition
  • Spectral analysis
    • Dedicated front-panel controls for commonly performed tasks
    • Automated peak markers identify frequency and amplitude of spectrum peaks
    • Manual markers enable non-peak measurements
    • Trace types Include: Normal, Average, Max Hold, and Min Hold
    • Detection types include: +Peak, -Peak, Average, and Sample
    • Spectrogram display enables easy observation and insight into slowly changing RF phenomena
    • Automated measurements include: Channel Power, Adjacent Channel Power Ratio (ACPR), and Occupied Bandwidth (OBW)
    • Trigger on RF power level
    • Triggered or Free Run spectral analysis
  • Optional serial triggering and analysis - serial protocol trigger, decode, and search for I2C, SPI, USB, Ethernet, CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-STD-1553, and I2S/LJ/RJ/TDM 10.4 in. (264 mm) bright XGA color display Small footprint and lightweight - Only 5.8 in. (147 mm) deep and 11 lb. (5 kg)Wave Inspector® Controls provide easy navigation and automated search of waveform data
Tektronix Test Equipment MDO4034B-3 Specs
Analog channels 4
Analog channel bandwidth 350 MHz
Rise time 1 ns
Sample rate (1 ch) 2.5 GS/s
Sample rate (2 ch) 2.5 GS/s
Sample rate (4 ch) 2.5 GS/s
Record length (1 ch) 20M
Record length (2 ch) 20M
Record length (4 ch) 20M
Digital channels 16
RF channels 1
RF channel frequency range 9 kHz - 3 GHz