Teseq ProfLine 2115 15 kVA Three Phase Harmonics & Flicker Measuring System

Rent Teseq ProfLine 2115 15 kVA Three Phase Harmonics & Flicker Measuring System
Enlarge Image
Request Quote Print Page
Datasheet
The Teseq ProfLine 2115 is an accurate and flexible 3-phase system designed to measure harmonics and flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3. The system is supplied complete with a stable, accurate, programmable 5 kVA per phase power source. The ProfLine 2115 system is therefore ready to measure and record any harmonics and flicker created by the EUT.

The system is delivered in a suitable 19” rack, fully integrated and ready to use with the supplied PC which has pre-installed software and calibration files. Measurements are made using precision, no burden, active hall-effect current transformers connected via a dedicated cable to a multichannel fast Data Acquisition Card (DAQ) fitted inside a PC. One voltage and three current measuring channels per phase are used to make simultaneous measurement of both current and voltage. Calculations are made using dedicated Teseq software (WIN 2100) to determine harmonics (classes A-D), inter-harmonics, flicker, dc, dt, dmax, Pst, Plt, inrush current and 24 x dmax.
 

Teseq ProfLine 2115 Features:

 
  • Complete test system for IEC 61000-3-2 and 3-3
  • Three phase system up to 16 Amps per phase
  • Power source suitable for testing to immunity standards
 

Teseq ProfLine 2115 Specifications:

 
Mains supply options ProfLine 2115-208 ProfLine 2115-400
Power source
Power output (AC mode) 3 x 5,000 VA 3 x 5,000 VA
Voltage AC, two ranges 0-150 V and 0-300 V 0-150 V and 0-300 V
Maximum current (low range) 37.0 Amps/phase, 110 Amps peak repetitive 37.0 Amps/phase, 110 Amps peak repetitive
Maximum current (high range) 18.5 Amps/phase, 96 Amps peak repetitive 18.5 Amps/phase, 96 Amps peak repetitive
Frequency range (AC mode) 16 – 1000 Hz 16 – 1000 Hz
Power output (DC mode) 3,500 watts/phase 3,500 watts/phase
Voltage DC, two ranges 0-200 V and 0-400 V 0-200 V and 0-400 V
Maximum current (low range) 26.0 Amps 26.0 Amps
Maximum current (high range) 13.0 Amps 13.0 Amps
Supply 3-phase, 208 Vac L-L, 50/60Hz 3-phase, 400 Vac L-L, 50/60Hz
Dimensions (per chassis) 178 x 483 x 610 mm 178 x 483 x 610 mm
Weight (per chassis) 28 kg 28 kg