Teseq NSG 3025 Burst Generator

Rent Teseq NSG 3025 Burst Generator
Enlarge Image
Rent Teseq NSG 3025 Burst Generator Rent Teseq NSG 3025 Burst Generator Rent Teseq NSG 3025 Burst Generator
Teseq (Schaffner) NSG3025
Request Quote Print Page
Datasheet Accessory Kit

The NSG 3025 offers useful tools to aid product design and provide detailed analyses. The test parameters are adjustable over wide ranges that far exceed the requirements called for in the standards and pulse data can even be adjusted during an actual test to detect trouble spots. A new random frequency mode has been introduced to identify hidden design problems. The instrument is fully functional under either local or remote, computer control - including the ramping and sequencing features.

The NSG 3025’s compactness and its ability to operate autonomously in all working positions signifi cantly simplify onsite tests. It will run pre-prepared tests and test sequences using its built-in coupling network for either AC or DC applications. The instrument’s specifi cations are more than generous enough to cover wide test margins. A printer output enables test reports to be produced.

The NSG 3025 is designed for use in industrial electronics, system installations, telecommunications, medical electronics, domestic appliances, offi ce automation, etc, and is fully equipped for all relevant product test specifi cations as well as future standards. The Windows-based WIN 3025 software package brings additional, fully automated functions to the NSG 3025 by making full use of a connected computer’s infrastructure.

 

Specifications:

Pulse form: 5/50 ns ±30% (50 Ω / 1 kΩ)
Pulse amplitude: 200 V to 4.8 kV ±10% (open circuit)
Pulse polarity: +, -, alternating
Pulse output impedance: 50 Ω ±20%
Burst frequency: 0.1 kHz to 1 MHz ±2%
Spikes per packet: 1 to 255
Continuous frequency: Up to 10 kHz
Burst repetition: 20 ms to 100s ±2%
Phase angle: Asynchronous or synchronous 0 - 360° ±2%
Statistical freq. distribution: Within selectable limits of burst frequency
Internal coupling network: Single phase, in accordance with IEC 61000-4-4
EUT supply: 250 V/16 A ac or 120 V/16 A dc max.
EUT connection: IEC 320 C20
Instrument power supply: 100 - 240 V, 50/60 Hz
Weight: 12.5 kg approx.
Coupling modes: L1, N, PE (and combination) - to reference ground functions for the automation, interleaved

CAS 3025 BURST/EFT PULSE VERIFICATION KIT:


The Teseq CAS 3025 burst/EFT pulse verifi cation kit has been specially designed to comply with the new requirements of IEC/EN 61000-4-4: amendment 2: 2001 to enable EMC engineers to verify their burst/ EFT test generators periodically.

The Teseq CAS 3025 comprises two termination attenuators – INA 265A and INA 266 – plus a coaxial RG58 cable and calibration certifi cate indicating the precise ratio.


Specifications:

INA 265A termination/attenuation (typical): 50 Ω; 1:1000
INA 266 termination/attenuation (typical): 1000 Ω; 1:2000
Bandwidth: 400 MHz
Max. input burst peak voltage: 8800 V peak
Operating temperature: -10 to +40°C
Dimensions L x W x H: 280 x 230 x 85 mm
Weight: 900 g approx.