The NSG 438 30 kV ESD Gun by Schaffner / Teseq fulfills the requirements of all known ESD standards. The basic model is type approved and calibrated in conformity with IEC 61000-4-2
. By adding appropriate network modules, other standards can be accommodated such as ISO 10605
, EN 61000-6
, IEC 61000-6-5
, as well as various MIL standards. Other applications can be accommodated through the use of special INA discharge networks.
Being well-balanced and pistol-shaped ensures that the Schaffner / Teseq NSG 438 ESD Gun is natural and comfortable in use. The control elements and display can always be seen by the operator, current operating conditions are constantly displayed.
The Schaffner / Teseq NSG 438 Electro-Static Discharge (ESD) Gun Simulator System generates standard-conform discharge pulses of 200 Volts to 30 kV, in both air discharge and contact discharge operation. The full range of parameter setting possibilities for polarity, pulse repetition, counter functions, breakdown detection, etc., remains fully available, all the way up to the maximum discharge voltage setting.
Teseq INA Discharge Networks
- Compatible with Schaffner / Teseq ESD Guns
Teseq (Schaffner) NSG438 Features
- Air and contact discharge 0.2kV to 30 kV
- Touch panel display controlled
- Battery powered
- Compliant with all known standards (IEC, ANSI, SAE, ISO, MIL-STD, RTCA/DO-160 Section 25)
- Interchangeable network modules
- Discharge detector
Teseq (Schaffner) NSG438 Specs
||ESD generator consisting of a base unit, discharge pistol, mains adapter and battery charging unit
||Battery or mains operation (100 - 240Vac)
||High voltage generator; microprocessor-based controller, optical PC interface, interlock, input/outputs for end of test, EUT-fault
||Operating unit with touch-sensitive display panel, exchangeable test probes and networks, trigger button
||IEC/EN 61000-4-2 with standard network (150pF/330Ω)
ISO 10605 with network INA 4381 (150pF/2kΩ) and INA 4382 (330pF/2kΩ)
Others according to requirements
||200V to 30 kV for air discharge and contact discharge, programmable in 100V steps
||Positive, negative automatic switching
||Single pulse; continuous at 0.5, 1, 5, 10, 20 & 25Hz; statistical distribution in 2 modes
||Dynamic discharge voltage measurement in air discharge mode
||With adjustable threshold
||Forwards pulse counter or backwards as a preset counter, up to 9999 pulses
||Trigger-button, or remote control signal
||Back-lit display with touch-sensitive control surfaces and a virtual thumb wheel, used to monitor and set up all the instrument's functions: Discharge voltage, breakdown voltage, type of discharge, polarity, repetition rate, counter/preset counter, memory, language, instrument status, detector threshold, etc.
|Test program memory
||Preset test data to IEC, ISO or other standards.
Store and recall of 8 complete user defined tests
||5 to 40°C (40 to 105°F); 20 to 80% rh (non condensing); 68 to 106kPa
||To EN 61326-1, EN 61000-6-2, EN 61000-6-3
How to Video: Teseq NSG 438 ESD Gun Simulator System