The Wavetek 145 combines the features of a function generator and a pulse generator in a single, compact unit. As a function generator it provides sine, triangle, and square waves over a wide 0.0001 Hz to 20 MHz frequency range...
Wavetek 171 combines a function generator and 4½ digit resolution frequency synthesizer in on package.
The 1018B Digital Peak Power Meter is a direct reading peak power meter that measures power on a single pulse, repeating pulses, or CW. Three trigger modes (Internal, External, and Free Run) plus an adjustable measurement gate,...
0.2 Hz - 2 MHz, 20 Vpp, 60 dB step, S/N, M/S, FM VCG Noise/Function
The Wavetek 144 HF Sweep Generator is a precision 0.0005 Hz to 10 MHz source of sine, triangle, square, positive pulse, and negative pulse waveforms ... each with variable amplitude, dc offset, and symmetry. Frequency range...
Wavetek Model 148A, 20 MHz AM/FM/PM Generator is a precision source of sine, triangle, square, ramp and pulse waveforms plus dc voltage. The waveforms may be controlled in symmetry as well as amplitude and dc offset. A built-in...
.0001 Hz - 50 MHz 15Vp-p Synthesized Pulse/Multifunction Generator
750 MHz - 40 GHz, Power Meter
The Wavetek 178 Waveform Synthesizer is a bench top or ATE programmable instrument that combines the precision of an 8 digit, 50 MHz synthesizer with the versatility of a function and sweep generator. In addition to sine and...
1 kHz - 12 MHz Synthesized Function Generator
10 kHz - 550 MHz, AM, FM, Synthesized Signal Generator
The primary purpose of the Model 24D is to provide two signals to the spectrum analyzer. The first is the rate of sampling necessary to allow the analyzer to display data in terms of orders, rather than frequency. The second is...
200 kHz - 2200 MHz, AM, FM, Phase M, Synthesized Signal Generator
Model 275 Programmable Arbitrary/Function Generator is a light-weight, half-rack instrument for bench or ATE use. The 275 can generate precise sine, triangle, square and user-defined arbitrary waveforms from 0 .01 to 10 Vp-p...
1 mHz - 25 MHz, 50 MS/s Synthesized Multi-Channel Arbitrary Waveform Generator Options: Option 001: Additional 50 MHz Arb Channel with 32k memory Option 001-EM: Additional 50 MHz Arb Channel with 128k memory...
The Wavetek 296 combines sophisticated performance with ease of use in a way previously not available in arbitrary waveform generators. The Wavetek 296 includes advanced waveform sequencing capability up to 4,096 waveform...
1 MHz - 1040 MHz, AM, FM, PM, CW Swept RF Generator
The Wavetek 3600D Cellular Test System combines previous experience and future vision in proven features and expandable platform. All TIA formats are covered, including AMPS, NAMPS, TDMA (IS-54B and IS-136), and extensive test...
Standard Waveforms: Since, square, triangle, pulse, pulse trains, DC, positive/negative ramp, positive/negative haversine, (sin x)/x, and five noise functions.
Continuously referenced, non-interfering sweep frequency response measurement Extremely fast sweep update Receiver is also high-powered SAM Hum and carrier to noise tests on modulated carriers High resolution LCD...
Up to 120 Ch Multifunction Logging DMM Options: 50-1 Measurement Module: Full function 50-2 Measurement Module: DC volts and temperature
The Wavetek 52A Datalogger combines the features of up to four digital multimeters with full-featured datalogging/data acquisition capability. Each measurement channel contains a fully isolated dual slope analog-to-digital...
Cross Channel Spectrum Analyzer
0.1 MHz - 2 MHz, 25 Vp-p into 50 ohms, Variable Phase Synthesizer Options: 001: Two Additional Channels
The Wavetek 680 is a multifunction system that can house up to 8 instruments in one 7-inch chassis. It has system buses for improved performance over rack and stack instruments and a Mate-CIIL interface. With the...
1 Hz to 100 kHz Frequency Range 115 dB/Octave Rolloff Pre- and Post-Filter Gain 716 System consists of mainframe and up to 16 independent-channel filter cards. Filter Card Options 001 and 002 Functions -...
5 Hz - 50 MHz Frequency Range
RF Peak Power Meter 30 MHz to 40 GHz
50Hz-500Hz 2ch. Dual Hi/Low Filter
1 MHz - 26.5 GHz, Power Sensor
1 MHz - 20 MHz, Trig, Sweep, Pulse and Modulation Synthesized Function
1MHz - 20MHz, 15 Vp-p 128k Memory Arbitrary/Function Waveform Gen
1 GHz - 4 GHz Microwave Sweep Generator
45 to 559 MHz Combination Signal Level/Leakage Meters
5 - 890 MHz Combination Signal Level/Leakage Meters
The IDEAL LanTEK III is an easy to use cable certifier that meets existing TIA and ISO/IEC performance requirements for testing up to Cat 7A/1000MHz. FiberTEK III adapters are used with LanTEK III for fast and simple...
5 - 1000 MHz Tilt, Scan, C/N, Hum Signal Level Meter w/ Spectrum Analyzer
5 - 1,000 MHz HFC Signal Analysis Meter
The Stealth Digital Analyzer family offers a true "One Box" solution for HFC network testing and deployment of digital video, data, and traditional analog services. While preserving the rugged design and industry...
The SDA-5000 Series of Stealth Digital Analyzers provides a lightweight, weather resistant, rugged, and affordable single instrument with the versatility to test the latest digital services as well as the ideal device for...
For intense reverse testing requirements, the rack-mounted SDA-5510 Headend Reverse Sweep Manager handles the reverse sweep job for up to ten different technicians on the same cluster of nodes. Using the SDA-5510 in conjunction...