Wavetek 8502A Microwave Peak Power Meter 30 MHz - 40 GHz

Rent Wavetek 8502A Microwave Peak Power Meter 30 MHz - 40 GHz
Enlarge Image
Wavetek 8502A
Request Quote Print Page
Datasheet
RF Peak Power Meter 30 MHz to 40 GHz
 
Wavetek 8502A Specs
  • Frequency Range: 30 MHz to 40 GHz depending on detectors (see PEAK POWER SENSOR specifications)
  • Power Range
    • Pulse: -20 dBm to +20 dBm
    • CW: -40 dBm to +20 dBm
  • (See sensor specifications)
  • Time Base Range: 1.2 ns/div to 20 ms/div (12 ns to 200 ms time window), using either the Data Entry Keyboard or the Control Knob.
    • Resolution: 0.1 ns
  • Trigger Delay Range: 0 to 200 ms using either the Data Entry Keyboard or the Control Knob.
    • Resolution: 0.1 ns
  • Triggering Modes
    • Internal: -10 dBm to +16 dBm
    • External (BNC): TTL levels, Maximum PRF 1 MHz
  • Markers: Up to 4 markers/channel plus a Reference Power Level cursor
  • Graph Display Mode: Plots the outline of the detected pulse on the electroluminscent display
  • Input Channels
    • 8501A: Single Channel
    • 8502A: Dual Channel
  • Auxiliary Outputs/Inputs (BNC)
    • Monitor: Provides a voltage proportional to the detected RF envelope.   Risetime is typically 20 ns, output impedance is nominally 50W
    • Analog Output: Provides a voltage proportional to detected power.  Scale Factor is 100 mV/dB
      • Trigger Input: TTL
      • RF Blanking: TTL open collector low during zeroing.  Used to control power source
      • Voltage Proportional to Freq (V / GHz): Allows direct entry of frequency from RF power sources equipped with a V µ F output
    • GPIB Interface
 

PEAK POWER SENSORS
 

Frequency Ranges

  • High Speed: (High Speed detectors can be used down to 500 MHz)
    16936, 16937: 750 MHz to 18.5 GHz
    17266: 750 MHz to 26.5 GHz
    17071: 750 MHz to 40 GHz
  • Low Speed:
    16934, 16935: 30 MHz to 18.5 GHz
    17267: 30 MHz to 26.5 GHz

Risetime

  • High Speed: < 15 ns, typically 10 ns
  • Low Speed: < 750 ns, typically 500 ns

Power Range

  • Measurement: -20 to +20 dBm (Pulse), -40 to +20 dBm (CW)
  • Absolute Maximum: (Damage Limit) +23 dBm (200 mW)

Connectors

  • 16936, 16934: Type N
  • 16937, 16935: Type APC-7
  • 17266, 17071, 17267: Type K (SMA compatible)