VNA Calibration Kits

The Anritsu 3652A K Connector Calibration Kit is a VNA calibration kit with all the tools and precision components needed to calibrate a VNA for 12-term error-corrected measurements. The Anritsu 3652A calibration...

The Keysight 11570A (formerly Agilent Technologies), accessory kit allows measurements in a 50 ohm system using the high-impedance probes of the standard 85081B. The kit contains two 11536A 50 ohm tees with...

The 85031B calibration kit contains a set of precision 7 mm fixed terminations and a one-piece open/short circuit used to calibrate network analyzers for measurement of devices with precision 7 mm connectors...

The Keysight 85032B calibration kit contains precision 50 ohms type-N standards used to calibrate network analyzers for measurement of devices with 50 ohms type-N connectors. Precision phase-matched 7 mm to 50...

The Keysight 85032F type-N 50 Ω calibration kit is used to calibrate network analyzer systems for measurements of components with type-N connectors up to 9 GHz. The standards in this calibration kit allow...

Provides two SMA male to APC-7 adapters, two SMA female to APC-7 adapters, as well as one each SMA male and female short circuits and 50 Ω( 1.06 SWR at 1 GHz) terminations.

The 85033E calibration kit contains precision 3.5mm standards used to calibrate network analyzers. Standards include fixed terminations, open circuits, and short circuits in both sexes. This kit is specified from...

DC to 3GHz, Calibration Kit

DC to 3 GHz, Mechanical Calibration Kit. The Keysight 85039B Calibration Kit, Type- F was previously manufactured as the Agilent 85039B Calibration Kit, Type-F.

The 85050D economy mechanical calibration kit contains precision calibration standard devices to characterize the systematic errors of network analyzers in the 7 mm interface. This kit also contains a torque...

The Keysight 85051B verification kit has a 7 mm connector and covers a frequency range of 300 kHz to 18 GHz. This kit includes a 10 cm airline, stepped impedance airline, 20 dB and 50 dB attenuators. The...

The Keysight 85052B mechanical calibration kit contains precision standard devices to characterize the systematic errors of network analyzers in the 3.5 mm interface. This kit also contains adapters to change the...

The Keysight 85052D economy mechanical calibration kit contains precision standard devices to characterize the systematic errors of network analyzers in the 3.5 mm interface. This kit also contains adapters to...

The 85053A Verification Kit contains a set of precision devices, with data, used to verify the error-corrected performance of the 8510 Network Analyzer.

DC to 18 GHz, Calibration Kit

DC to 18 GHz, Calibration Kit. The Keysight 85054D Mechanical Calibration Kit was previously manufactured as the Agilent 85054D Mechanical Calibration Kit.

The 85056A Standard Mechanical Calibration Kit 50 GHz contains precision standard devices to characterize the systematic errors of Keysight network analyzers in the 2.4 mm interface. This kit also contains...

The Keysight 85093C RF Electronic Calibration (ECal) Module | 3.5mm has replaced the former 85093B module. The 85093C  has a frequency range of 300 kHz to 9 GHz and allows technicians to calibrate vector...

The Keysight 85130D test port adapter is designed to protect the test set port when it would be directly connected to the device under test. These adapters have a special rugged female connector designed for...

26.5GHz, Flexible Cable Set

The Keysight N4433A Microwave electronic calibration (ECal) module makes calibration of vector network analyzers fast, easy, and accurate. ECal is a precision, single-connection calibration technique for your...

The Keysight N4693A Electronic Calibration Module is part of the N4690 Series. This 2-port Microwave ECal has a frequency range of 10 MHz to 50 GHz. With reliable solid-state switching and excellent accuracy for...

The Keysight N5262AC12 Banded Millimeter Wave Calibration Kit is part of Keysight's series of N5262A wave network analysis solutions. The Keysight N5262AC12 is a VDI calibration kit with a...

The Keysight N5262AC15 Banded Millimeter Wave Calibration Kit is part of Keysight's series of wave network analysis solutions. The N5262AC15 model has a frequency range of 50 to 75 GHz, easy-to-use...

The King Nutronics 3657 Portable Calibration System classic and dependable with user-friendly applications. Ideal for precision calibration, the 3657 can be used for the effective calibration of vacuum gauges...

The Maury Microwave 8650CK10 Calibration Kit is a fixed load SOLT (DC–18.0 GHz) VNA calibration tester. The Maury Microwave 8650CK10 is designed to help perform SOLT calibration, which uses Short, Open and...