The probe contains three orthogonally arranged coils with detector diodes. The three voltages, corresponding to the spatial components, are available individually at the probe output. The NBM basic unit calculates the...
Narda Industrial Field Meter for measuring electric and magnetic fields of equipment employing Industrial, Scientific and Medical (ISM) radio frequencies.
The Narda EMR-300 has been replaced by the Narda NBM-550. View the NBM-550
12.4 GHz - 18 GHz, Standard Gain Horn
1.0 GHz to 4.0 GHz, Dual Coaxial Reflectometer Coupler
0.7 GHz - 18 GHz, High Power Termination
18 GHz - 26.5 GHz, Standard Gain Horn
8.20 GHz - 12.4 GHz, Standard Gain Horn
2.60 GHz - 3.95 GHz, Standard Gain Horn Antenna
DC - 6 GHz, High Power Coaxial Attenuator
The Narda Model 8858 Human Equivalent Antenna closely simulates the impedance of an average human being 50 Hz to 110 MHz. The Model 8858 consists of two removable antenna sections supported by a third antenna section with an...
Narda's EA5091 electrical field probe provides frequency shaping to match the FCC standard for a controlled / occupational environment and the results can be displayed in "% of standard." Isotropic measurements...
The probe contains three orthogonally arranged dipoles with detector diodes. The three voltages, corresponding to the spatial components, are available individually at the probe output. The NBM basic unit calculates the...
The Narda EF1891 probe contains three orthogonally arranged dipoles with detector diodes. The three voltages (linearized internally), corresponding to the spatial components, are available individually at the probe output. The...
The Narda EFA-300 has been replaced by the Narda NBM-550. View the NBM-550
The probe contains three orthogonally arranged coils with detector diodes. The three voltages, corresponding to the spatial components, are available individually at the probe output. The NBM basic unit calculates the resulting...
The Interference and Direction Analyzer IDA 2, Radio Direction Finder (RDF) was specially developed for identifying and localizing interference, impairments and unknown sources. It is not simply a receiver with antennas...
The Narda Magnetometer HP-01 is designed to measure and perform analysis on static and time-variable magnetic fields from 0 Hz (DC) to 1 kHz. Narda HP-01 magnetometers include a powerful FFT analyzer that allows signal analysis...
The Narda NBM E-Field-Probe EF 6092 is a 100 MHz - 60 GHz sensitive isotropic field probe for all types of high frequency applications. The Narda NBM contains three orthogonally arranged dipoles with detector diodes. The diode...
The NBM-500 Series is the most accurate non-ionizing radiation survey system available. It provides the broadest frequency coverage of electric and magnetic fields. Both flat response probes and probes shaped to international...
The Narda SignalShark Signal Analyzer is a real-time handheld signal analysis device designed for the detection, classification and localization of RF signals between 8 kHz and 8 GHz. Narda SignalShark Signal Analyzers are...
The Narda NBM-550 Broadband Field Meter is part of the NBM-500 device family. It makes extremely accurate measurements of non-ionizing radiation. Equipped with probes for measuring electric and magnetic field strengths, it...
The Narda SRM-3006, the 9 kHz - 6 GHz selective radiation meter from Narda Safety Test Solutions, has been specially developed as a frequency-selective measuring system for safety issues in electromagnetic fields. The operating...
The Narda ELT-400 Exposure Level Tester is an innovative exposure level meter for measuring magnetic fields in the workplace and in public spaces. The model is designed for health and safety professionals in industry, the...
Sensor technology has been improved in this series by re-designing not only the sensor itself, but also by packaging it in a field replaceable package that contains all the electronic data necessary to maintain calibrated...
The Narda EHP-50F is a LF analyzer in a particularly compact package, which is equipped with E field and H field sensors for all three spatial dimensions. It can therefore make frequency selective, non-directional measurements...
The Narda NBM-580 allows users to combine multiple-sensor installation into a fully functioning monitoring or alarm system. Configured as a single communication point, this product allows complete control over sensors that are...
Frequency selective measuring system for electric and magnetic fields. As well as for workplace safety applications in industry, the EHP-200A is also ideal for determining the near and far fields of broadcasting transmitters...
The Narda SRM-3000 has been replaced by the Narda SRM-3006. View the SRM-3006
Designed primarily for industrial and medical applications, the Narda EMR-30 units are also suitable for getting started in telecommunications applications. The E-field probes make isotropic measurements. The EMR-30 also has a...
The Narda EMR-20C has been replaced by the Narda NBM-550. View the NBM-550