The EMC Partner 20dB ATTEN. is an attenuator device compatible with the MIL3000 test system's modules, specifically MIL3-10K10M and CS116-10K10M. This product is an accessory for the EMC Partner MIL3000 Test system.
The EMC Partner CS116-10K10M Plug-in Module for MIG2000-6 according to MIL-STD-461 CS116 is used to replicate damped sinusoidal transients which are used to simulate oscillations arising from excitation of the platform wiring...
The EMC Partner CS116-30M100M Plug-in Module for MIG2000-6 according to MIL-STD-461 CS116 is used to replicate damped sinusoidal transients which are used to simulate oscillations arising from excitation of the platform wiring...
The EMC Partner DC-S17CL is a discharge network set for voltage spike testing. DC-S17CL models fulfill DO-160-S17 and MIL-STD-461 CS106 testing requirements. The set consists of 2 DN parallel and 2 DN serial injection devices...
The EMC Partner DOW3000 Oscillatory Wave Generator produces Damped Oscillatory Wave (DOW) signals via a 32A capacitative coupling clamp at an oscillation frequency of 3, 10 or 30MHz, with a usable cable diameter of 4 - 70mm and...
The EMC Partner Fx-AMD24C1 Plug-in Module for MIG2000-6 in accordance with ABD0100.1.8.1 for voltage spike testing power.
The EMC Partner Fx-CS106 Plug-in Module for MIG2000-6 in accordance with MIL-STD-461 CS106 for "Spike testing on power supplies."
The EMC Partner Fx-DO-160-S17 Plug-in Module for MIG2000-6 in accordance to RTCA/DO-160 section 17 tests for voltage spikes.
The EMC Partner Fx-DO-160-S19 Plug-in Module for MIG2000-6 according to DO-160 section 19 tests "Induced Signals."
The EMC Partner Fx-MIL1275B Plug-in Module for MIG2000-6 in accordance with MIL-STD-1275B tests 5.4.2.3 spikes imported into equipment.
The EMC Partner I-PROBE-CS is a monitor probe offering a maximum cable diameter of 5cm, peak energy level of of 15A and a frequency range of 10 kHz to 400 MHz. Technicians rent I-PROBE-CS accessories for current impulse...
The EMC Partner MF1000-1 Inductive Coil is a 1m X 1m magnetic field test coil with the ability to test the following: Test Type Standard 50/60Hz IEC 61000-4-8 Surge IEC...
Used for PIN injection and single stroke cable bundle testing up to level 4, the EMC Partner MIG0600MS Multiple Stroke Avionics Test Generator is an extension to the MIG0600SS which adds multiple stroke capability. Multiple...
The EMC Partner MIG0600SS Single Stroke Avionics Test Generator is used for PIN injection and single stroke cable bundle testing up to level 4 for DO-160 / ED-14 indirect lightning test on aircraft. The MIG0600SS can be easily...
The EMC Partner MIG0618SS Single Stroke Waveform Generator is a stand-alone generator that delivers single stroke waveforms in excess of the level 5 cable bundle requirement. Extending the single stroke system to achieve test...
The EMC Partner MIG1212EMP Electromagnetic Pulse Generator simulates the incidence of electromagnetic pulse induced into power supply cables in military or civil defense installations. This system delivers impulses of 0.5/50&mu...
The EMC Partner MIG-OS-MB Avionics Test Generator is used for WF2 multiple stroke and WF3 multiple burst tests on cable bundles. Unique in its class, MIG-OS-MB is factory programmed to perform all current multiple stroke and...
The EMC Partner TEMA3000 is a sophisticated analytical software developed by EMC Partner to provide technicians with several testing advantages: a forward looking software suite, a graphic user interface, parameter and test...
The EMC Partner VERI5 is a high voltage BNC featuring a 5 Ohm termination and an integrated divider for the NATO-SLOW-10u, Fx-AMD24C1, Fx-AMD24C1 and CN-MIG-BT4 accessories. This product is an accessory for the EMC Partner...
The EMC Partner VERI50 is a high voltage BNC with a 50 Ohm termination and an integrated divider. Pairs with the MIL3-DO-160-S17, a MIL3000 module. This product is an accessory for the EMC Partner MIL3000 Test system.
The EMC Partner MIL3000 Military Test System is a military and avionic modular test system offering technicians their choice of couplers, which allow easy expansions to fulfill an array of requirements. These test systems are...
The MIG2000-6 is available with a range of plug-in modules capable of generating damped oscillatory and double exponential pulses in accordance with MIL-STD-461G: CS115, CS116 and other standards. MIG2000-6 system comprises the...
The best just got better. Already well established as a supplier of equipment to test indirect lighting effects, EMC PARTNER introduces the AVI3000 Indirect Lightning Generator a state of the art test system for DO-160 section...
New ideas and new technologies are needed to meet the demands of a constantly evolving market. IMU3000 introduces a graphical user interface that every mobile device user will recognize. Easy navigation using a touch panel and...
The EMC-Partner TRA2000 Transient Test System offers full compliance CE Mark and ANSI transient test solutions. A choice of 4kV or 6kV SURGE generators with Combination, 100 kHz Ring, and 10/700 waves plus your choice of ESD...
The EMC-Partner ESD3000 is a light weight, hand-held battery operated tester. The modular construction enables many different test standards to be performed by simply changing the module. A broad range of accessories enable...