Electrical Safety Analyzers

The Fluke ESA620 Electrical Safety Analyzer featuring smart technology to enhance productivity under any standard, represents the next generation in portable electrical safety testers. With selections of three test loads, two...

Vitrek's 944i Hipot Tester combines AC dielectric strength testing (AC Hipot) with DC dielectric strength testing (DC Hipot), Insulation Resistance (HV IR) and a low ohmsic Earth Continuity measurement all in one feature...

The Associated Research OMNIA II 8207 Electrical Safety Compliance Analyzer is an innovative electrical safety tester which conducts AC Hipot testing on voltage outputs ranging from 0-5000AV and DC Hipot testing on voltage...

The Chroma 19055/19055-C Series Hipot Analyzers are designed for Hipot tests and analysis. 19055 Series has 500 VA rating and AC output up to 5 kV/100mA which complies with EN50191 requirements. In addition to AC/DC/IR tests...

Electrical safety testing is one of the major items in the electrical product quality tests. All electrical products consisting of adapter, SMPS, charger, house appliance, information technology product and video product are...

The Associated Research 3160 Hyamp III Ground Bond Tester features an enhanced graphic LCD. It provides 60 Amps of Ground Bond test current. The unit was designed to provide enough Ground Bond test current for products with...

The Associated Research 8104 Hipot/Ground Tester offers AC Hipot, DC Hipot, Ground Bond/Continuity, and Insulation Resistance tests through a DUT connector. Associated Research designed the 8100 series to be used as a bench top...

The Chroma 19057 Hipot Analyzer is an equipment specially designed for testing and analyzing ultra-high withstand voltage. The series of models include 10kVac/12kVdc/20kVdc with maximum AC20mA/DC10mA output can perform AC/DC...

Vitrek built the 95X series from the ground up with DSP technology—to bring you the safest, fastest, most capable, feature rich hipot testers available. The 95X series combines high output power, with a wide range of AC...

The Associated Research 7564SA Quadchek II AC/DC Hipot is a Insulation Resistance & Ground Bond Tester. QUADCHEKII includes the same tests as HypotULTRA®II along with a high current Ground Bond test for applications...

In a world where data is king, HypotULTRA improves traceability with on-board data storage and allows you to automate hipot testing with a variety of communication interfaces. Increase efficiency with our direct barcode scanner...

The Chroma 19052 AC/DC/IR Hipot Tester is part of Chroma's 19050 series of electrical safety testers. The 19052 Hipot Tester is an advanced digital hipot with load and line regulation to ensure the measurement integrity...

up to 6kV AC/DC Electrical Safety Tester

The Model 510L LINECHEK Line Leakage Tester is used for line leakage and Dielectric Withstand (Hipot) testing. The Model 510L LINECHEK provides the capability of meeting the line leakage test specified in the following...

3-30A Ground Bond Tester, 50-400Hz, RS232, 4 Wire

5 kV - 6 kV, AC/DC/IR Electricial Safety Tester

Dielectric Withstand and Ground Bond Tester

AC Safety Analyzer, 5kV AC Hipot   Models: V60 AC Hipot Electrical Tester V61 AC/DC Hipot Electrical Tester V63 AC/DC/IR Hipot Electrical Tester

The Vitrek V63 AC/DC/IR Electrical Safety Analyzer is part of the V60 Series of electrical safety testers. And when it comes to getting the job done, the Vitrek V63 comes loaded with standard features that help you automate the...

The Associated Research 5030DT Hyamp II 31A Ground Bond Tester is a semi-automated, microprocessor controlled Ground Bond tester. It provides 31 Amps of Ground Bond test current. It has the option to be used as a bench-top...

The Quadtech Guardian 1030 Multi-Purpose AC/DC/IR Hipot Tester has all the features of the Guardian 1010 with the addition of DC hipot and IR measurement capabilities. The test voltage can be programmed in the range from 50VDC...

The Quadtech Guardian 6000 Plus Electrical Safety Analyzer is the industry’s first safety analyzer with simultaneous Hipot and Ground Bond capability providing a dramatic savings in test time. Five instruments in one, the...

The QuadTech Sentry 50 High Current Ground Bond Tester provides high current testing of ground continuity between chassis and power cord ground on a wide variety of electrical products and appliances. The unit is designed for...

40 Amp Ground Bond Tester

The model 8106 provides AC Hipot, DC Hipot, Insulation Resistance, Ground Bond/Continuity, Functional Run and Line Leakage tests in a single DUT connection.   The 8106 can be used as a bench top instrument or as a PC...

The Associated Research HypotULTRA Series is the premier line of Electrical Safety Testers for Laboratory and Production Line settings. In a world where data is king, HypotUTLRA improves traceability with on-board data storage...

The Associated Research Linechek 620L Fully Automated Line Leakage Tester is a fully automated Line Leakage tester that can be configured to perform 8 of the most commonly required Line Leakage tests. The 620L has the most...

The Associated Research Omnia 8006 Hipot Tester provides the operator with complete test setup and results in an easy-to-use interface which eliminates the need to decipher cryptic abbreviations. The graphic display makes...

The Associated Research OMNIA II 8206 Electrical Safety Compliance Analyzer provides AC Hipot, DC Hipot, Insulation Resistance, Ground Bond / Continuity, Functional Run, and Line Leakage tests in a single DUT connection. The...

The Associated Research OMNIA II Series is a complete line of multi-function Electrical Safety Testers designed to satisfy even the most demanding application requirements. The Associated Research OMNIA II Series includes...

Versatility makes this tester an essential component for both corrective and predictive maintenance procedures. The capability to test all insulation systems of coils and windings makes the Baker ST112A ideal for use on motors,...

The BioTek 501 Pro Electrical Safety Analyzer is designed to perform routine tests to determine if electrical devices, conductive surfaces, and receptacles meet recognized safety standards. It can accurately measure leakage...

Chroma creates the 19020 multichannel Hipot tester with a brand new architecture. It can measure the Hipot leakage current of all channels at the same time and conduct tests on 100 DUTs maximum simultaneously. There is no...

The quality verification tests of wound components consist of AC/DC Hipot tests, Insulation Resistance (IR) tests and Impulse Winding tests. Chroma integrates the above tests into 19035 Wound Component EST Scanner Series to...

The Chroma 19036 Wound Component EST Analyzer is the industry's first Wound Component Electrical Safety Test (EST) Analyzer that combines the functions of impulse test, hipot, insulation resistance and DC resistance...

The Chroma 19054 AC/DC/IR/SCAN Hipot Tester is part of Chroma's 19050 series of electrical safety testers. The 19054 Hipot Tester is an advanced digital hipot with load and line regulation to ensure the measurement...

The Chroma 19071 AC Hipot Tester performs AC dielectric withstand (hipot) tests. The test voltage can be programmed in the range of 50V AC to 5kV AC with a resolution of 1V. Its maximum total output current is 15mA. The...

The Chroma 19073 AC/DC/IR Hipot Tester has all the features of the 19071 plus measurement of insulation resistance. The IR measurement range is from 1MΩ to 10GΩ with test voltages from 50 to 1000V DC. The front...

The Chroma 19572 provides high current testing of ground continuity between chassis and power cord ground on a wide variety of electrical products and appliances. The unit is designed for maximum flexibility and operation...

Electrosurgical Analyzer, Universal Input: 25VA, 50/60 Hz, 100 VAC, 115 VAC, 230 VAC

The Kikusui TOS5050 is a withstanding voltage tester for AC use only having a transformer capacity of 500 VA and test voltage of 0 to 5 kV.   Functions include Pass/Fail judgement, remote control function, memory backup...

The Kikusui TOS5101 Hipot Tester 10 kV is designed exclusively for hipot testing of electronic equipment and components conforming to various safety standards. The use of a high luminance, large fluorescent display tube for the...

Kikusui TOS5300 Series AC/DC Hipot Testers are used in hipot tests (withstanding voltage tests) and insulation resistance tests, and generate an output of 5 kV/100 mA (AC) and 6 kV/10 mA (DC). Kikusui TOS5300 Series hipot...

3 - 30A, Earth Continuity Tester

The Kikusui TOS6200 tester is designed to perform the earth continuity tests required for class-I devices by safety standards such as IEC, EN, VDE, BS, UL, JIS, and the Electrical Appliance and Material Safety Low (Japan...

The Kikusui TOS9201 Hipot Tester with Insulation Resistance Test has a DC hipot testing function in addition to AC hipot and insulation resistance testing functions. The power block, a core component, employs a high-efficiency...

The Quadtech Guardian 6100 Plus is the industry's first production safety analyzer with simultaneous Hipot and Ground Bond capability providing a dramatic savings in test time. Six instruments in one, the Guardian 6100 Plus...

The QuadTech Sentry 50 Plus Ground Bond Tester provides up to 30 Amps for high current testing to even the most stringent standards. The front panel of the Sentry instrument includes a digital display and user friendly control...

The Vitrek 4700 Precision High Voltage Meter offers the highest level of measurement accuracy, yet is surprisingly easy to use. Vitrek has harnessed DSP technology to provide outstanding AC &DC voltage accuracy, stability...

5 kV - 6 kV Electrical Safety Tester

The Vitrek V70 AC Hipot Tester is part of the V7X Series of high performance, low cost hipot testers. With color touch LCD & high speed DSP technology, the compact and rugged V7X sets the standard for price/performance...

The Vitrek V71 AC/DC Hipot Tester is part of the V7X Series of high performance, low cost hipot testers. With color touch LCD & high speed DSP technology, the compact and rugged V7X sets the standard for price/performance...

The Vitrek V73 AC/DC Hipot, Insulation Resistance Tester is part of the V7X Series of high performance, low cost hipot testers. With color touch LCD & high speed DSP technology, the compact and rugged V7X sets the standard...

The Vitrek V74 AC/DC Hipot, IR and Ground Bond Tester is part of the V7X Series of high performance, low cost hipot testers. With color touch LCD & high speed DSP technology, the compact and rugged V7X sets the standard for...

The Vitrek V79 4 Wire 30A Ground Bond Tester is part of the V7X Series of high performance, low cost hipot testers. With color touch LCD & high speed DSP technology, the compact and rugged V7X sets the standard for price...

With color touch LCD & high speed DSP technology, the compact and rugged V7X sets the standard for price/performance ratio. Made in the USA to meet tough UL, TUV and IEC requirements – the V7X provides unbeatable...