Loop Antennas

The AH Systems AK-18G Antenna Kit consists of five E-field antennas, one magnetic loop antenna, and two current probes. Each of the antennas and probes are provided with calibrations when connected to a 50-ohm input receiver or...

This 12" Broadband loop antenna with preamplifier is an excellent solution for magnetic field testing. A.H. Systems' designs, manufactures and delivers high performance Loop Antennas for a wide range of magnetic field...

1 kHz - 30 MHz, 12" Transmit Loop

The Antenna Research line of untuned loops, which includes the PLA-130/A, features both active and passive antennas to meet a wide range of testing requirements. PLA-130 is designed for the shield room testing requirements of...

The Com-Power AL-130 is a broadband receiving loop antenna for operation in 10 kHz - 30 MHz frequency range. The antenna is designed for magnetic field measurements, utilizing a shielded loop. Its aluminum construction makes it...

The base of the Model 6509 loop antenna contains a type N female connector and a manually switchable four-band transformer. The transformer gives the antenna greater efficiency resulting in a better conversion of power to field...

30 Hz-1 MHz, Loop Antenna

The Empire LP105 Loop Antenna has a 12-inch diameter with a range of 150kHz to 30MHz.

The ETS-Lindgren 6507 Active Shielded Loop 1 kHz - 30 MHz is an active receiving loop antenna designed to perform shielding effectiveness measurements per MIL-STD 285 and NSA-65-6 specifications. A radio frequency preamplifier...

The ETS-Lindgren 7603 Coil Antenna 20 Hz - 50 kHz is built from the specifications in the original MIL-STD-461 document. The Model 7603 is a magnetic field generating coil 12.0 cm (4.75 in) diameter, made of delrin and wound...

The ETS-Lindgren 7604 Shielded Coil Antenna is a magnetic field pick-up coil 13.3 cm (5.25 in) diameter, and has a loop that is constructed of aluminum. The loop has 36 turns of 7 x 41 Litz wire for lower inductance. The 7604...

The ETS-Lindgren 7605/7606 Coil/Shielded Coil Antennas are used as part of a system to verify the ability of an EUT to withstand radiating magnetic fields. The Model 7605 is a 20-turn coil of AWG-12 enamel-insulated copper wire...

The Fairchild ALP-10 25-inch loop antenna is deigned to obtain magnetic field measurements from 20 Hz-100 kHz. This versatility allows it to be useful for a wide range of project scales. The ALP-10's antenna has a balanced...

The Narda IDA Directional Antenna 1, 3100/11 is a light and easy-to-use loop antenna that covers a frequency range of 20 MHz to 250 MHz. IDA Directional Loop Antenna 1 models include the ISM band at 27 MHz and are tailored for...

The Narda IDA Loop Antenna, H-Field 3100/14 is a low-frequency loop antenna designed for detecting defective or poorly screened switched power supplies or electrical controllers that emit interference. Additionally, Narda IDA...

The PMM RF300 large loop antenna is designed to fit within the requirements of EN55015: 2006 + A2: 2009, section 9.9.1, which refers to CISPR16-1-4: 2007 + A1: 2008 section 4.6.1. The PMM RF300 is fully compliant with the...

The Schwarzbeck HFRA SF02G Passive Magnetic Transmitting Loop Antenna is designed to emit magnetic fields of very high field strength at frequencies from 10 kHz up to 30 MHz. Schwarzbeck HFRA SF02G antennas allow for testing...

The Type 7334-1 is equipped with an epoxy-glass base plate which serves as a spacer to enable the user to place the loop at exactly 7 cm from the face of the item under test as required by test procedure RE01 of MIL-STD-462...