Protection Relay Test Sets

The OMICRON CMC 356 Voltage Protective Relay Test Set is a universal solution for testing protective relays and measuring electrical parameters. It features six current outputs capable of up to 64 A per phase...

The Manta Test Systems MTS-5100 Protective Relay Test System is a versatile, all-in-one solution designed for relay testing with a straightforward front panel interface. MTS-5100 serves as an integrated system...

The Doble F6150e is a relay testing system designed for evaluating protection relays and schemes, capable of performing a broad range of simple to complex tests. It offers twelve configurable sources, split...

The OMICRON CMC 256 Voltage Protective Relay Test Set is renowned for its high-accuracy testing and reliability for various protection devices. The protective relay test serves as an all-inclusive calibration...

The Doble F6300e External Amplifier is engineered to support power system simulators for detailed relay testing and system modeling. It features 12 enhanced current sources that can each handle up to 35 A...

The Doble F6080 Field Calibration Unit is designed for on-site calibration of Doble Power System Simulators, ensuring accurate performance without the need for laboratory calibration. It automates recalibration...

The Megger SVERKER 750/780 Relay Test Sets are designed for secondary testing of protective relay equipment, with the 780 model capable of testing voltage relays in a frequency range from 15 Hz to 550 Hz. These...

The Megger SMRT46 Multi-Phase Relay Tester is designed for testing protective relays and motor overload systems, accommodating both electromechanical and solid-state types. It features the capability to produce...

The Doble F6150SV Power System Simulator is a protective relay test set for testing IEC 61850-based protection devices and schemes. The simulator can test IEC 61850-based systems at the process-bus level and...

The Megger SMRT36 Three Phase Relay Test System is one of the smallest, lightest, highest powered, complete three-phase relay systems in its industry. The Voltage-Current, or "VIGEN," modules...

Typically reclosers are installed on electric utility poles closer to the power conductors while the recloser controller is located on the same pole closer to the ground. The controller is connected to the...

The Doble F6150 relay test set is the total test solution for protection schemes. It can test everything from a single high burden electromechanical earth/ground fault relay, to complete modern multi-function...

Using the F6300 High-Power Current Amplifier in combination with the F6150 Power System Simulator takes you to the next level of realistic power system simulation for protection scheme testing. With this powerful...

The amplifiers supply the appropriate signals (V and I) to the device under test. The response of relay elements to the voltages and currents is transmitted back to the RTDS® via its logic inputs and outputs....

The Doble F6350E Voltage/Enhanced Current Amplifier is used for high power relay testing. The amplifier allows technicians to test complex schemes and to perform necessary system modeling to meet several...

The Manta Test Systems MTS-5000 Protective Relay Test System is the first all-in-one relay test system with a direct front panel interface for all functions, without exception! The ideal integrated system for...

The Megger GOOSER™ IEC 61850 Test System is a general purpose relay test set ideal for the testing of GOOSE horizontal communication in substation protection and control applications. Megger GOOSER relay...

The Megger MRCT Relay and Current Transformer Test Set is engineered for thorough testing of relays and current transformers. It features capabilities such as simultaneous multi-tap measurements, reducing test...

As a stand-alone unit the SMRT1 has the "smart" combination of high compliance voltage and high current to test electromechanical, solid-state and microprocessor-based overcurrent relays, including...

The Megger SMRT410 test system may be customized by adding the number of Voltage-Current, “VIGEN”, modules needed for specific test applications. The SMRT410 has the “smart” combination of...

The Megger SMRT410D is a versatile, multi-phase relay test system built for use in a wide range of environments and climates. The current output reaches 60 amps at 300 VA per phase and can deliver up to 10...

The Megger SR-98 Protective Relay Test Set is a part of the SR Series and uses digital signal processor technology. The SR-98 is durable and user-friendly making it the ideal device for technicians completing...

The OMICRON ARCO 400 is a recloser control tester that provides quick manual trip and close checks and is compatible with recloser-specific test adapters. OMICRON ARCO 400 models simulate a recloser by harnessing...

The OMICRON CMA 156 amplifier units can be used in combination with any CMC test set or in conjunction with digital real time power system network simulators. The outputs are galvanically separated from the...

With its compact design and low weight of 12.9 kg / 28.4 lbs, the OMICRON CMC 353 provides the perfect combination of portability and power. It is the ideal test set for three-phase protection testing and the...

The OMICRON CMC 430 is the preferred choice for test engineers in cases where excellent transportability is needed and three currents up to 12.5 A or six voltage outputs are sufficient. Its low weight of just 8.7...

The CMC 850 is the world's first protection test set dedicated to IEC 61850 and focuses on real-time communication methods to interface with devices under test. The OMICRON CMC 850 offers many...

The OMICRON CMS 156 is a three-phase voltage and current amplifier that can be integrated with any CMC test set or used with digital real-time power system simulators. It supports up to six independent voltage...

The SMC Mentor 12 All-In-One Relay Test Set revolutionizes the traditional relay testing concepts. With more than 25 years in designing and developing test equipment,SMC has launched a product which exceeds the...