Make A Payment
My Cart
Login
WORLDWIDE SHIPPING
800-404-2832
+800 0404 2832 International
Home
Products
Categories
Manufacturers
Industries & Solutions
Test Standards
EMC
Communications
Electrical
Environmental Health & Safety
Environmental Simulation
NDT Inspection
Power Supplies & Loads
General Purpose
View All »
EMC
Radiated Immunity
Amplifiers
EMC Antennas
EMP Generators
Field Strength Monitors & Probes
RF Components
RF Shielded Enclosures
RF Power Meters
RF Signal Generators
Receiving Antennas
Radiated Emissions
EMC Antennas
EMI Receivers
EMI Scanners
Near Field Probes
RF Preamplifiers
RF Shielded Enclosures
Spectrum Analyzers
Conducted Emissions
EMI Receivers
Harmonics & Flicker
LISNs
RF Current Probes
Spectrum Analyzers
Transient Limiters
Conducted Immunity
Automotive Transient Generators
Conducted LF/RF Immunity
ESD Guns
Indirect Lightning Test Systems
Military & Aerospace Transient Generators
Transient Generators
Coupling Decoupling Network
Bulk Current Injection Probes
Communications
Cellular Network
CW Transmitters
Antenna Alignment Tools (AAT)
Cable and Antenna Analyzers
Radiation Meters
Fiber Test Kits
Gauss Meters
PIM Testers
Personal RF Monitors
Spectrum Analyzers
Data Network
Fiber Optic Inspection
Fiber Testers
Fusion Splicers
LAN Cable Certifiers
OTDRs
SONET Test Sets | SDH
Ethernet IP Network Testers
Radio Network
Audio Analyzers
Directional Interference
Land-Mobile Radio System Modulation Analyzers
Lock-in Amplifiers
Digital Radio Test Sets
Spectrum Analyzers
Wireless Communications Test Sets
Signal Analysis
Bit Error Rate Testers (BERT)
Noise Figure Analyzers and Sources
Oscilloscopes
Pulse Pattern Generators
RF Power Meters
RF Signal Generators
Spectrum Analyzers
Vector Network Analyzers
Vector Signal Generators (VSG)
Electrical
Facility Power Testing
Power Quality
Ground Resistance Testers
Power Loggers
Scope Meters
Photovoltaic Testers
Thermal & Infrared Cameras
Underground Cable Locators
Industrial Electrical Testing
Borescopes
Vibration Analyzers
DLRO (Ductors)
Hipot Testers
Insulation | Ground Megohmmeters
Laser Alignment Tools
Motor Analyzers
Sound Level Meters
Thermal & Infrared Cameras
Bond Testers
Acoustic Cameras
Transformer Testing
Current Transformer (CT) Testers
Oil Dielectric Testers
Partial Discharge Testers
Power Factor Test Sets | Tan Delta
Protective Relay Test Sets
Sweep Frequency Response Analyzers
Circuit Breaker Testing Equipment
Transformer Turns Ratio (TTR) Testers
Winding Resistance Meters
Transmission Line Testing
AC Hipot Testers
Cable Fault Locators
Time Domain Reflectometers (TDR)
DC Hipot Testers
Partial Discharge Testers
Power Factor Test Sets | Tan Delta
VLF Cable Testers
Environmental Health & Safety
Air Monitoring
Gas Analyzers
Particle Counters
Dew Point Meters
Industrial Hygiene
Radiation Meters
Gauss Meters
Sound Level Meters
Monitoring and Inspection
Ultrasonic Flow Meters
Helium Leak Detectors
Light & Color Meters
Thermal & Infrared Cameras
RF Safety
Personal RF Monitors
RF Survey Meters
Area Monitors
Spectrum Analyzers
Direction Finding Receivers
Environmental Simulation
Environmental Chambers
Benchtop Chambers
HAST Chambers
Stability Chambers
Temperature & Humidity Chambers
Thermal Chambers
Thermal Shock Chambers
Vacuum Drying Chambers
HALT Chambers
Temperature Cycling Chambers
Arc Test Chambers
Temperature Testing
Industrial Ovens | Furnaces
Recirculating Chillers
Thermal Chambers
Temperature Forcing Systems
Temperature Cycling Chambers
Arc Test Chambers
Motion Testing
Force Testers
Particle Impact Noise Detection (PIND)
Shaker Systems
Shock Testers
NDT Inspection
Materials Testing
Coordinate Measuring Machines (CMM)
Ionographs
Laser Micrometers
Roughness Testers
Ultrasonic Thickness Gauges
Ultrasonic Flaw Detectors
XRF Analyzers
Ground Penetrating Radar (GPR)
Accelerometers
Particle Impact Noise Detection (PIND)
Laser Doppler Vibrometers
Machinery Maintenance
Pipe Cameras
Borescopes
Vibration Analyzers
Accelerometers
Laser Alignment Tools
Sound Level Meters
Visual Inspection
Pipe Cameras
Digital Microscopes
Borescopes
High-Speed Cameras
Thermal & Infrared Cameras
Acoustic Cameras
Power Supplies & Loads
AC
AC Loads
AC Power Supplies
Grid Simulators
Precision Power Analyzers
Variable Transformers
DC
Battery Testers
DC Loads
DC Power Supplies
Precision Power Analyzers
Battery Cell Testers
Battery Module Testers
Battery Pack Test Systems
General Purpose
Calibrators
Digital Multimeters
Electrical Calibrators
Electrical Standards
HART Field Communicators
Multifunction Calibrators
Pressure Calibrators
Temperature Calibrators
Dead Weight Testers
Component Testing
Benchtop Power Supplies
Digital Multimeters
Electrical Safety Analyzers
Function Generators
Impedance Analyzers
LCR Meters
Oscilloscopes
Precision Power Analyzers
RF Signal Generators
Semiconductor Parameter Analyzers
Source Measure Units (SMU)
Spectrum Analyzers
Vector Network Analyzers
Vector Signal Generators (VSG)
Industrial CT Scanners
Circuit Board Testers
Potentiostats | Galvanostats
Data Acquisition
Data Loggers
Scopecorders
Signal Conditioners
3Z Telecom
AE Techron
AEMC
Aeroflex
Agilent
Amplifier Research
Anritsu
Baker Instruments
Biddle
Bruel & Kjaer
California Instruments
Chroma
Cincinnati Sub-Zero
Com-Power
Doble
Dranetz
EM Test
EMC Partner
Emerson
Empower
ESDEMC
Espec
EXFO
FLIR Systems
Fluke Calibration
Fluke
Fluke Networks
Haefely
High Voltage Inc.
Instruments for Industry (IFI)
inTEST Thermal Solutions
Keithley
Keysight
Kikusui
LeCroy
Magna-Power Electronics
Megger
Met One
Mitutoyo
Narda Safety Test Solutions
NetScout Systems
NH Research
NoiseKen
Olympus
OMICRON
Ophir
Pacific Power Source
Phenix
Phoenix
Preen
Rohde & Schwarz
Solmetric
Sorensen
Sumitomo
Tektronix
Teseq
Thermotron
Viavi Solutions
VibrAlign
Yokogawa
View All »
Industries
5G
Communications
Environmental Health & Safety
Defense
Electrical
Hydro Power
Solutions
Choosing an Environmental Chamber
Clean Room Testing
Electrostatic Discharge (ESD) Testing
What is EMI/EMC Testing?
Automotive EMC Testing
Fiber Testing
How to Use a Laser Alignment Tool
Multipaction Testing
NDT | Non-Destructive Testing
Power Quality Instrument Selection Guide
Substation Maintenance
Cell Tower Testing
Building Envelope Testing
HIRF Testing
What is XRF Analysis?
Battery Testing Equipment
AEN Standards
Airbus Standards
ANSI/ASA Standards
ANSI/BICSI Standards
ANSI/IEEE Standards
ANSI/SCTE Standards
ANSI/TIA Standards
ASTM Standards
Boeing Standards
CE Marking
DaimlerChrysler Standards
ECE Standards
EN Standards
EPA Standards
EU Directive Standards
EUROCAE Standards
FCC Standards
Fiat Standards
Ford Standards
GM Standards
ICNIRP Standards
IEC CISPR Standards
IEC Standards
ISO Standards
Health Canada Standards
ISO/IEC 17025:2017 Accreditation
ISTA Standards
ITU-T Standards
JASO Standards
LV Standards
Mercedes-Benz Standards
NEBS Standards (Network Equipment Building System)
NERC/FERC Standards
JEDEC Standards
MIL Standards
Peugeot Standards
Renault Standards
RTCA/DO-160
SAE Standards
TIA-EIA Standards
UL Standards
Military Guidelines
IETF Standards
View All »
Request A Quote
Calibration
Contact Us
NARDA STS
Search for:
Manufacturer:
EM Test
EM TEST is the leading manufacturer and supplier of EMC generators for the
automotive industry
and among the leaders for IEC, telecom, medical and component testing. EM TEST equipment offers the capability to match most test routines exactly to spec and to modify existing spec-based routines as required. Test routines are easy to handle, sophisticated and technologically state-of-the-art. Software programs are exceptionally simple and generators are extremly reliable. EM TEST products combine innovative design with concepts for smooth operation. Only top quality parts and components, purchased and checked piece-by-piece, are used for the production of EM TEST equipment. A simple operation concept and an easy-to-use software enable the operator to just select the standard to be tested and the corresponding test is ready. Just press the start button and the test is run automatically, including report generation.
ATEC carries transient immunity generators, ESD simulators, voltage drop simulators and more from EM Test. Rent EM Test products from ATEC for affordable, reliable EMC test equipment ready for immediate shipping.
Filter Products
EM Test UCS 200N50 Automotive Transient Generator
The EM Test UCS 200N50 Automotive Transient Generator is made to meet the global specifications of international and car manufacturers. The EM Test UCS 200N50 Automotive Transient Generator has a built-in coupling network that...
EM Test NX5 Multifunctional Test Generator
The EM Test NX5 Multifunctional Test Generator is a multifunctional transient immunity test system capable of simulating a variety of transients, including EFT/burst transients according to IEC 61000-4-4, surge waves with...
EM Test ESD NX30 Electrostatic Discharge Simulator up to 30 kV
The EM Test ESD NX30 electrostatic discharge simulator is an easy-to-use tester. It consists of a power supply unit and the discharge gun, operated from the discharge gun. It generates electrostatic discharges up to 30 kV in...
EM Test LD 200N Load Dump Generator for ISO 7637
The EM Test LD 200N is a compact, high-energy, Load Dump generator. The EM Test LD 200N generates Load Dump pulses as per manufacturer specifications per ISO 7637, SAE J1113, SAE J1455, JASO, and more. The EM Test LD...
EM Test VDS 200N30 Voltage Drop Simulator 60 V, 30 A
The EM Test VDS 200N30 Voltage Drop Simulator 60 Volts, 30 Amps is used to simulate the various battery supply waveforms recommended by international standards and by car manufacturer requirements. Especially the manufacturer...
EM Test NX7 Multifunctional Test Generator
The EM Test NX7 Multifunctional Test Generator simulates burst, surge, power fail, ring wave and several other types of transient waveforms at a rated power of up to 7kV. EM Test NX7 immunity test systems are multifunctional...
EM Test OCS 500N6F Damped Oscillatory Wave Simulator 3MHz/10MHz/30MHz
The EM Test OCS 500N6F Damped Oscillatory Wave and Ringwave Simulator includes the test capabilities for fast damped oscillatory waves at 3MHz/10MHz/30MHz up to 4.4kV and is extendable for slow damped oscillatory waves at...
EM Test Netwave Series, Single Phase AC/DC Power Source
The EM Test NetWave Series, 1-Phase AC/DC Power Source is specifically designed to meet the requirements as per the standards IEC/EN 61000-4-13, -4-14 and -4-28. Used as a DC power source it covers the requirements as per the...
EM Test VDS 200N100 Voltage Drop Simulator 60 V, 100 A
The EM Test VDS 200N100 Voltage Drop Simulator 60 Volts, 100 Amps is used to simulate the various battery supply waveforms recommended by international standards and by car manufacturer requirements. Especially the manufacturer...
EM Test PFM 200N100.1 Automotive Power Fail Simulator
The PFM 200N100.1 has been designed to fully meet the requirements for E10, E13 and E14 of the LV 124 and the E48-09 of the LV 148. It also allows to perform microinterruptions with fast rise/fall time of as low as 200ns as...
EM Test CWS 500N1 Continuous Wave Simulator, 80W
The CWS 500N1 Continuous Wave Simulator is the most compact single box test equipment for testing conducted RF immunity as per IEC 61000-4-6, 60601-1-2, and related standards with a frequency range of 100kHz to 300MHz. Apart...
EM Test UCS 500N5 Multifunctional EFT, Surge & Power Fail Generator
The EM Test UCS 500N5 Multifunctional EFT/Burst, Surge and Power Fail Generator is a versatile tester that covers power fail requirements and transient requirements that adhere to international standards. The EM Test UCS 500N5...
EM Test Coupling NX7 BSR-3-480-32 CDN, 32A
The EM Test Coupling NX7 BSR-3-480-32 is a coupling/decoupling network (CDN) with a current range of up to 32A. EM Test Coupling NX7 BSR-3-480-32 CDNs are models for 3 x 480 VAC (P-P). The BSR-3-480-32 is part of EM Test's...
EM Test Autowave Arbitrary Generator
The EM Test Autowave Arbitrary Generator generates and records automotive waveforms with a 2-channel transient recorder. The EM Test Autowave has an integrated high-performance PC with a 500 kS/s sample rate and dual-processor...
EM Test DPA 500N Single Phase Power Analyzer with Harmonics & Flicker
The DPA 500N is a fully compliant analyzer for harmonics and flicker as per the latest IEC/EN 61000-3-2, IEC/EN 61000-3-3 and JIS C 61000-3-2 requirements. It follows the design specifications as per IEC/EN 61000-4-7:2002 and...
EM Test PFS 200N Series Automotive Power Fail Simulator
The EM Test PFS 200N Automotive Power Fail simulator is used to comply with standard requirements, mainly from vehicle manufacturers, to perform fast voltage dips ad drops (micro-interruptions). Some standards specify very fast...
EM Test RCB 200N1 Transient Immunity Test Generator for FORD EMC-CS-2009.1
The EM Test RCB 200N1 transient generator meets the requirements set out by the FORD EMC-CS-2009.1 standard document. It is built using the components outlined in Figure F-1 to generate pulses such as CI 220 A1, A2-1, A2-2, C-1...
EM Test CCI Capacitive Coupling Clamp for IEC 61000-4-4
The EM Test CCI Capacitive Coupling Clamp is ideal for fulfilling EN 61000-4-18, EN 61000-4-4, IEC 61000-4-18 and IEC 61000-4-4 standards. EM Test CCI Capacitive Coupling Clamps are used to couple EFT/burst pulses to I/O lines...
EM Test CDN-M2/M3N for Supply Lines
Immunity test to conducted disturbances, induced by radio-frequency fields according to the standards IEC/EN 61000-4-6 and IEC/EN 60945 introduce different types of coupling/decoupling networks according to the characteristics...
EM Test 3-Phase Netwave Series AC/DC Power Supply
EM Test 3-Phase Netwave Series AC/DC Power Supply equipped with Mil-STD-704 option is a three-phase AC/DC power source, specifically designed to meet the requirements as per the standards IEC/EN 61000-4-13, -4-14, -4-27(*) and ...
LV 123 Automotive Component Testing System
The LV 123 bundle includes the EM Test 3-Phase Netwave Series AC/DC Power Supply, EM Test UCS 200N100 Automotive Transient Generator, and AE Techron 7228 Linear Power Amplifier, which together form a test solution for achieving...
EM Test ACS 500N2.3 Single Phase AC/DC Voltage Source, 2 kVA
The EM Test ACS 500N2.3, 2 kVA Single Phase AC/DC Voltage Source is a single phase AC/DC source, specifically designed for test applications as per IEC 61000-4-16 in combination with the CWS 500N4 common-mode disturbance...
EM Test Automotive Transient Emission Set 100 kHz - 125 MHz
The EM Test Transient Emission Set 100 kHz - 125 MHz consisting of the BS 200N100 electronic switch, the artificial network AN 200N100 and the BSM 200N40 mechanical switch is an easy-to-use, economic and compact solution, fully...
EM Test CSS 500N10 Surge Current Generator, 6 kV, 10 kA
Surge current pulse with a wave shape of 8/20us are commonly requested to test and determine the characteristics of protection elements. Fail inputs are offered as standard for DUT monitoring purposes. Peak values of voltage...
EM Test CWS 500N2 Continuous Wave Simulator
The EM Test CWS 500N2 Continuous Wave Simulator is the first compact solution world-wide for testing RF conducted immunity for IEC 61000-4-6 to narrowband radiated electromagnetic energy. Apart from the injection probe and the...
EM Test CWS 500N3 Low Frequency Simulator 10 Hz - 250 kHz
The EM Test CWS 500N3 Low Frequency Simulator 10 Hz - 250 kHz is the state-of-the-art solution in a compact single-box design to test the immunity to conducted low-frequency disturbances and low-frequency magnetic fields. The...
EM Test CWS 500N4 Conducted/Common-mode Disturbance Simulator, DC - 165 kHz
The EM Test CWS 500N4 Conducted Simulator is the state-of-the-art solution in a compact single-box design to test for immunity to conducted, common mode disturbances in the frequency range 0Hz (DC) to 165kHz. Such test...
EM Test Dito 16.5 kV ESD Simulator for IEC 61000-4-2
Electrostatic discharges either from a human body to any other part or between two different objects can cause persistent disturbances or even destruction to sensitive electronics or controls. Voltages of several 1,000 volts...
EM Test DPA 503N Power Analyzer per IEC 61000-3-3, IEC 61000-3-11 and IEC 60725
The DPA 503N is used for 3-phase applications but also supports single phase applications and Comes with a frequency range of 15-3000 Hz. Harmonics and interharmonics are caused by modern electronic power conditioning...
EM Test EFT 500N5.5 Electrical Fast Trasient/Burst Immunity Test Generator, 4,8kV, 1MHz
The EM Test EFT 500N5.5 Electrical Fast Transient/Burst Immunity Test Generator, 4,8kV, 1MHz is a state-of-the-art EFT/Burst tester with a built-in coupling/decoupling network for single phase mains supply lines and a HV...
EM Test EFT 500N8.1 EFT/Burst Generator, 7kV, 1MHz
The EMTest EFT 500N8.1 EFT/Burst Generator is the state-of-the-art EFT/Burst tester with a built-in coupling/decoupling network for single phase or three-phase mains supply lines and a HV terminal to connect a capacitive...
EM Test ESD 30N Electrostatic Discharge Simulator
Electrostatic discharges either from a human body to any other part or between two different objects can cause persistent disturbances or even destruction to sensitive electronics or controls. ESD 30N is an ESD tester to...
EM Test Harmonics & Flicker Test System for IEC/EN 61000-3-2/3-3
The EM Test DPA 500N Harmonics & Flicker Test System is a fully compliant analyzer for harmonics and flicker as per the latest IEC/EN 61000-3-2, IEC/EN 61000-3-3 and JIS C 61000-3-2 requirements. It follows the design...
EM Test ISO Automotive Rack
When a test system consists of multiple devices, there are many advantages to building a rack. The entire cabling can be optimally integrated into the rack. The EMC-compatible grounding concept is designed with one central...
EM Test LD 200N100 Load Dump Generator
The EM Test LD 200N Load Dump Generator pulses simulate the sudden disconnection (e.g. by corrosion) of the battery from the alternator while the alternator is generating current to load the battery. Such Load Dump pulses are...
EM Test LD200S19 Load Dump Generator
The Phenix Technologies LD100 Liquid Dielectric Test Set operating controls are conveniently grouped on the front panel and include a large, easy-to-read digital voltmeter, on/off switch with indicator light, rate of rise...
EM Test VSURGE NX20 1.2/50us Surge Generator for IEC/EN 61730
The EM Test VSURGE NX20 1.2/50us Surge Generator is a transient immunity test system capable of generating surge voltage up to 20 kV. EM Test VSURGE NX20 surge generators are designed to generate high voltage transients as...
EM Test PFS 503N32 Power Fail Simulator
The EM Test PFS 503N32 Power Fail Simulator represents a real three-phase Power Fail simulator. Not only phase-by-phase testing is possible but any combination of phases and all three phases can be simultaneously tested. The...
EM Test UCS 200N Automotive Transient Generator for ISO 7637
The EM Test UCS 200N Ultra-Compact Simulator series combines the power of a micropulse simulator, a recoupling network, and an EFT/Burst simulator into one device. Meeting international and car manufacturer specifications on a...
EM Test UCS 200N100 Automotive Transient Generator
The EM Test UCS 200N100 Automotive Transient Generator unifies the capabilities of an EFT/Burst simulator, a Micropulse simulator and the required coupling network into one box. The UCS 200N100 is equipped to meet all...
EM Test UCS 500N7 Multifunctional Test Generator
The UCS 500N7 ultra-compact simulator is the most versatile tester to cover transient and power fail requirements according to international standards (basic and generic standards) and product/ product family standards with...
EM Test VDS 200N Voltage Drop Simulator
The EM Test VDS 200N Voltage Drop Stimulator encompasses three supply voltage categories with capability ranges of up to 200A depending on the model and the application. The EM Test VDS 200N series stimulates various battery...
IEC 61000-4-18 Immunity Test System
The IEC 61000-4-18 bundle includes the EM Test OCS 500N6F Damped Oscillatory Wave Simulator and the EMC Partner DOW3000 Oscillatory Wave Generator, which together form a test solution for achieving IEC 61000-4-18 compliance. ...
EFT/Burst Testing System: 5.5kV, 3 Phase AC, 100A
The EFT/Burst Testing Bundle includes the EM Test NX5 Multifunctional Test Generator and the Teseq CDN 163 EFT / Burst Coupling Network, which together form a complete 3-phase test solution for achieving IEC 61000-4-4, MIL-461G...
Filter Products
Related Content
Industries
Defense
Solutions
EMC Testing
Automotive EMC Testing
Narrow Your Results
Subcategories
AC Power Supplies
Automotive Transient Test Systems
Conducted LF RF Immunity
Coupling Decoupling Network
Damped Oscillatory (DOW) Generators
DC Power Supply
EFT-Burst Generators
ESD Guns
Function Generators
Harmonics & Flicker
Ring Wave Generators
Surge Generators
Transient Generators
Voltage Dips & Interrupts Generators
Apply