Thermo Keytek ECAT E411 EFT/Noise Burst Simulator

Rent Thermo Keytek ECAT E411 EFT/Noise Burst Simulator
Enlarge Image
Thermo Fisher Scientific Thermo Keytek E411
Request Quote Print Page
Datasheet
The Thermo Keytek ECAT E411 EFT/Noise Burst Simulator is a plug-in module for the Thermo Keytek ECAT Modular EMC Test System.
 

Features:

  • All test parameters under full software control via KeyTek BurstWare
  • Burst Voltages from 200V to 4.4kV
  • IEC specified 5ns/50ns impulses
  • 50 ohm source impedance
  • Built-in pulse monitor
  • Real World EFT options including Chirp and frequencies to 2MHz
 

Specifications:

Burst Polarity:  Positive, negative, alternating
Burst Voltage:  200V to 4.4kV
Burst Voltage Resolution: 5V
Burst Voltage ±10% of setting ÷ 2 with
Tolerance: 50½ load, ±20% of settingwith no load
Burst Frequency: Adjustable from 1kHz to 1MHz up to 4.4kV
Burst Duration: 1.0ms to 20ms; 1.0ms resolution or 1 to 200 pulses
Period Between Bursts: Adjustable from 300ms to 5s; 1ms resolution
Burst Test Length: 1 to 360 sec.; 1 sec. resolution; 1 to 240 min.; 1 min. resolution; 1 to 24 hours; 1 hour resolution
Wait Time 1 to 360 sec.; 1 sec. resolution
Between Tests:   1 to 240 min.; 1 min. resolution 1 to 24 hours; 1 hour resolution
Voltage Monitor: Built-in; 150MHz bandwidth