Micronics Portaflow D550 Portable Ultrasonic Clamp-On Flow Meter

Rent Micronics Portaflow D550 Portable Ultrasonic Clamp-On Flow Meter
Enlarge Image
Micronics PF D550
Request Quote Print Page
Datasheet
The Micronics PF D550 Portable Doppler Flow Meter is used to monitor and balance flow, or to troubleshoot flow problems in full pipes. It is ideal to evaluate performance of in-line flow meters and can be installed, calibrated and started-up in minutes. The PF D550 can be used for projects where a permanent flowmeter is not required or to temporarily replace installed flow transmitters. The PF D550 ultrasonic sensor is clamped on the outside of a pipe. An acoustic pulse is reflected back to the sensor from particles or gases in the flowing liquid. The flow rate of any fluid can be measured as long as it contains air bubbles or solids. It is ideal for wastewater, slurries, sludge and most chemicals, acids, caustics and lubrication fluids.
 
Micronics PF D550 Features
  • Simple 5-key Calibration
  • 300,000 Point Data Logger
  • 4-20mA Output
  • 10-Digit Totalizer
  • AC/DC Operation
  • Built-in Rechargeable Battery
Micronics PF D550 Specs
  • Flow Rate Range ± 0.03 to 12.2 m/sec (± 0.1 to 40 ft/sec) in most applications
  • Pipe Size Ultrasonic sensor mounts on any pipe from 12.5 mm to 4.5 m (½” to 180” ID)
  • Display White, backlit matrix - displays flow rate, totalizer, operating mode and calibration menu
  • Power Input Built-in NiMH battery for up to 18 hours continuous operation
  • External charger with 100-240VAC 50/60Hz input
  • Outputs 4-20mA (500 ohm) when AC powered
  • Data Logger USB for Data Log transfer by direct PC connection
  • Programmable 300,000 data point capacity, time and date stamped or formatted reports including total, average, minimum, maximum and times of occurrence