Tektronix TCP303 Oscilloscope Current Probe
- DC – 50 MHz
- Max DC + Peak AC Current: 15A
- Max Peak Pulse Current: 50A
Tektronix TCPA300 Current Probe Amplifier
- DC to 100 MHz maximum bandwidth
- Automatic control and onscreen scaling and units
- AC/DC input coupling
Tektronix TCP0020 Current Probe
- Easy-to-use design
- DC to >50 MHz bandwidth
- Core jaw diameter of 5 mm (0.2 in)
Tektronix P6015A High Voltage Probe
- 40 kV Peak (100 ms pulse width)
- Silicone Dielectric (No Freon)
- Nominal Length - 10 ft.
Fluke i5s AC Current Clamp
Cal Test Electronics CT4198 Differential Probe
- Bandwidth: 100MHz
- Max. Differential: ±8kV
- Rise Time: 3.5ns
Tektronix TDP3500 Differential Probe
- Bandwidth: ≥3.5GHz
- Rise time: ≤140ps
- Attenuation: 5X
Agilent 1134A InfiniiMax 7 GHz Active Probe
- Supports differential and single-ended measurements
- Common mode rejection of the differential probe reduces the noise floor
- Flat frequency response to eliminate distortion
Yokogawa 701921 100 Mhz Differential Probe
- Test range: 700 V - 100 MHz
- Bandwidth of DC to 100 MHz
- Output voltage: ±7 V (DC or ACpeak)
Power Electronic Measurement LFR-1/15-B/500 Peak Current Probe
- Peak Current: 300A/3kA
- Bandwidth (-3dB): 0.15Hz - 1MHz
- Accuracy: ±0.3% (typ.)
Yokogawa 700929 10:1 Probe
- Bandwidth: DC to 100MHz (-3dB)
- Attenuation ratio: 10:1
- Connector Type: BNC
Tektronix P6563A SMD Probe
- Bandwidth (-3dB): 500MHz
- Rise time: 800ps (typical)
- Attenuation: 20X
Fluke i40s-EL Clamp-on Current Transformer
- Up to 40A AC
- Max Conductor Size: 15 mm
- CT Compatibility: 1A & 5A secondary
Tektronix TPP0201 Passive Voltage Probe
- Bandwidth: DC - 200MHz
- Rise time: <2.3ns (typical)
- Attenuation: 10X
Fluke 80i-110s AC/DC Current Clamp DC - 1kHz/20kHz
- Current Ranges: 0 to 10A DC or AC peak 0 to 100A DC or AC peak
- 0 to 10A DC or AC peak
- 0 to 100A DC or AC peak
Fluke i410 AC/DC Current Clamp
- Battery-powered Hall-effect probe measures 1 A to 400 A
- 1mV/Amp output guarantees easy reading on your meter
- Take accurate current readings without breaking the circuit
Tektronix CT5 Current Probe
- 1.5 inch diameter conductors
- Measurements on bare conductors to 3000 V
- Nullifies Dc effects to 300 A with Dc Bucking Coil
Fluke I2000 Flex AC Current Clamp
- Three ranges: 20A, 200 A & 2000 A, 100 mV/A, 10 mV/A & 1 mV/A output
- Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
- Maximum conductor diameter 178 mm
Fluke i1010 AC/DC Current Clamp
- Battery-powered Hall-effect probe that extend the current ranges of Fluke tools, measuring DC current from 1 A to 1000 A and AC current from 1 A to 600A
- Provides accurate current reading without breaking the circuit
- Compatible with most Fluke multimeters
LeCroy HFP1000 High Frequency Probe 1 GHz
- Interface: ProBus; complete compatibility with WavePro, Waverunner, and LC-series oscilloscope having firmware version 8.7.0 or higher
- Five Interchangeable tips for probing a variety of test points
- Replaceable probe tip socket
LeCroy CP150 Current Probe
- Current probe
- Compact design
- Broad bandwidth
LeCroy AP033 Active Differential Probe
Tektronix AM503B Current Probe System
Tektronix A6303XL Current Probe
- 8 Meter Cable
- 100 Amps Continuous/500 Amps Peak
- DC to 10MHz
Tektronix A6303
- AC/DC Split Core Current Probe
- Max Current of 500A
- 23 ns