Mitutoyo LSM-512S with LSM-6200 Display Laser Micrometer

The Mitutoyo LSM-512S is a 120mm laser micrometer with a resolution of 0.0001-0.1mm, an accuracy of ±85µm and a ±6µm linearity. The Mitutoyo LSM-6200 display unit is included. A high scanning rate (3200 scans/sec), high accuracy, non-contact measuring system, the Mitutoyo LSM-512S inspects small, fragile workpieces at a high temperature, even while in motion or vibrating.

Product Info Related Products

Model	LSM-512S
Acceptable standard of laser	IEC, FDA
Measuring range	1 - 120mm (.04" - 4.72")
Resolution (selectable)	0.0001 - 0.1mm (.000005" - .005")
Repeatability	±.85µm (±32µinch)
Linearity at 20°C	Entire range: ±6.0µm (±240µinch) Narrow range ±(4.0+0.5ΔD)µm
Positional error	±8.0µm (±320µinch)
Measuring region	30 x 120mm at ø1 - 120mm (1.2" x 4.72" at ø.04" - 4.72")
Scanning rate	3200 scans/s
Laser wavelength	650nm, Visible
Laser scanning speed	904m/s (35590)
Operating temperature	0°C - 40°C
Operating humidity	35 - 85% RH (with no condensation)
Water/Dust protection grade	Conforming to IP64
Mass	Emission unit: 3.0kg (6.6lbs.) Reception unit: 1.2kg (2.64lbs.) Base: 1.8kg (3.96lbs.), Signal cable: 0.5kg (1.1lbs.)

General-purpose type with a wide measurement range of 1mm to 120mm
Provides high accuracy with a linearity of ±6µm over the entire measurement range and ±(4.0+0.5∆D)µm in the narrow range
Excellent repeatability of ±0.8µm
Ultra-high scanning rate of 3200 scans/sec
Certified accuracy over entire measurement range
Improved resistance to IP64-level environments
Standard I/O output, analog output and RS-232C output interfaces; wireless capable
Free Quicktool software simplifies the setup and operation of the LSM-6200

Measurement types:
- In-line glass fiber or fine wire diameter
- Outer diameter of opaque or transparent cylinders
- Outer diameter and roundness of cylinder
- X- and Y-axis electric cables and fibers
- Thickness of film and sheet
- Spacing of IC chip leads
- Film sheet thickness
- Disk head movement
- Gap between rollers
- Taper and form
- Tape width
- Outer diameter of optical connector and ferrule
- Dual system for measuring a large outside diameter