- Selectable bridge excitation (0.3 to 15 Vdc)
- Fully adjustable calibrated gain from 1 to 11000
- All bridge completion built-in, including 120- or 1000- and 350- ohms dummies
- Bandpass: 50 kHz (-0.5 dB); 125 kHz (-3.0 dB)
- Input
- Strain Gauges: Quarter (120 ohms or 1000 ohms and 350 ohms), half or full bridge (50 to 1000 ohms). Dummy resistors installed
- Transducers: Foil or piezo-resistive strain gauge types
- Potentiometer
- DCDT displacement transducer
- Excitation: 0.3 to 6, 0.7, 1, 1.4, 2, 2.7, 3.5, 5, 7, 10, 12 and 15 Vdc
- Bridge Balance - Method: Counter-emf injection at preamp; automatic electronic; dual range; can be disabled on front panel
-
Shunt Calibration - Circuit (2-level, dual polarity):
- Single-shunt (for stress analysis) across any bridge arm, including dummy gauge
- Double-shunt (for transducer) across opposite bridge arm
-
Amplifier
- Gain: 1 to 11000 continuously variable
- Frequency Response (all gains, full output):
- - dc coupled: dc to 50 kHz, -0.5 dB max; dc to 125 kHz, -3 dB max
- - ac coupled: 1.7 Hz to 125 kHz, -3 dB max
-
Filter
- Characteristics: Low-pass active 2-pole Butterworth standard
- Frequencies (-3 ±1 dB): 10, 100, 1000 and 10 000 Hz and wide-ban
-
Amplifier Outputs
- Standard Output: ±10V
- Tape Output: ±1.414V (1 Vrms)
- Galvanometer Output: ±10
-
Playback
- Input: ±1.414V full scale
- Gain: X1 to tape output; X7.07 to standard output
- Power: 105 to 125V or 210 to 250V (switch-selected), 50/60 Hz, 10 watts, max
Can be used with a Vishay 2360 4 Bay Portable Adapter