DeFelsko PosiTector 200 Series Coating Thickness Gauges
- 0.5 - 300 mils range
- Polyurea, asphalitic neoprene, thick polymers, etc.
- Range limits apply to polymer coatings
Olympus Magna-Mike 8600 Magnetic Thickness Gage
- Two new durable probe designs: Straight and Right Angle
- Replaceable Wear Caps: Standard and Chisel tip
- Expanded target selection – 3/16 and 1/4 in. magnetic target balls – Wire target
Danatronics MTG-99 Extended Range Magnetic Thickness Gauge
- Measures the Thickness of All Nonferrous Materials
- Nondestructive Measurements
- 0.0001” to 1” Thickness Range
DeFelsko PosiTector 6000 Coating Thickness Gauge
- 60+ Readings Per Minute
- 250 Readings Per Probe
- Offers Screen Capture
Dakota Ultrasonics DFX-7+ Flaw Detector & Thickness Gauge
- Flaw Detector Automatic: probe zero, probe recognition, and temperature compensation Measurement: variety of modes to address a number of applications Large data storage with multiple
- Automatic: probe zero, probe recognition, and temperature compensation
- Measurement: variety of modes to address a number of applications
Olympus 45MG Ultrasonic Thickness Gage
- Compatible with full line of Olympus dual element transducers for thickness measurements on internally corroded metals
- Min./Max. mode
- Two Alarm modes
Olympus 38DL PLUS Ultrasonic Thickness Gauge
- Dual and single element transducer compatibility
- Wide thickness range: 0.08 mm (0.003 in.) to 635 mm (25 in.) depending on material and transducer selection
- Corrosion thickness gaging with dual element transducers
Danatronics ECHO 9 Ultrasonic Thickness Gauge
- Simultaneous Live Color A-Scan and Thickness Display.
- 3.5” Sunlight readable color display.
- Field upgradeable software options include.
Krautkramer Branson DME DL Handheld Ultrasonic Thickness Gauge
Elcometer Instruments PTG Precision Ultrasonic Material Thickness Gauge Series
- Echo-Echo ThruPaintTM (E-E) Interface Echo (I-E) & Plastic Mode (PLAS)measurement modes
- Measurement range from 0.15mm (0.006") to 25.40mm (1.00")
- 2-Point, 1-Point, Material, Velocity & Factory Calibration options
Olson Instruments IES Concrete Thickness Gauge
- Thickness accuracy ± 2% at high resolution when calibrated on a known thickness
- Thousands of tests can be performed per hour when “imaging” of internal concrete conditions is required
- System is compact, durable, and easily transported allowing for multiple tests per day
Olson Instruments CTG-2 Concrete Thickness Gauge
- Ruggedized, hand-held test head with integrated displacement transducer and solenoid impactor
- No coupling agents required for use of test of concrete
- Works on cured, hardened concrete of an elevated deck or on grade
Olympus 35RDC Composite Damage Checker
- For use on solid laminate structure aerospace composites
- Simple one-button calibration
- Thickness range 0.63 mm to 22.8 mm (0.025 in. to 0.900 in.)
Tritex 3000 Underwater Thickness Gauge
- Intelligent Probe Recognition (IPR)
- Automatic Measurement Verification (AMVS)
- Ignores coatings up to 6mm thick using multiple echo and up to 20 mm with Coating Plus+ selected
NDT Systems TG110-DL Miniature Ultrasonic Thickness Gage Package
- Automatic Probe Recognition system
- A series of 10 transducers ranging from 2.25MHz to 10MHz
- Single and two-point calibration
Dakota Ultrasonics ZX Series Thickness Gauge
- Zero: Manual or auto zero option
- Probe Types: Selectable probe frequency & diameter for improved linearity
- High Speed Scan: Display the lowest reading found during a scan - scan speed at 100Hz
Demeq QC5 DLC Coating Thickness Gauge
- Measure over ferrous and non-ferrous bases
- 9 calibration modes
- dmq probes with CalTag technology
Danatronics EHC-09DLCW Digital Ultrasonic Thickness Gauge
- Live simultaneous color waveform and thickness display.
- Vibration and color change on alarm.
- Control of gain, blanking, range, RF and rectify modes.
Danatronics MTG-99 Magnetic Thickness Gauge
- Measures the Thickness of All Nonferrous Materials
- Nondestructive Measurements
- 0.0001” to 1” Thickness Range
Olympus 37DL Plus Ultrasonic Thickness Gage
- Thru-Coat™ technology measures and displays the thickness of the metal part and its coating using a "single backwall echo".
- Temperature Compensation feature adjusts the material velocity for changes in material temperature.
- Optional Oxide/Scale feature measures and displays the thickness of the steel and the oxide/scale build-up.
Cygnus Instruments Underwater Ultrasonic Thickness Gauge
- 6 mm (0.25 inch) 5 MHz
- 13 mm (0.5 inch) - 2.25, 3.5 or 5 MHz
- 19 mm (0.75 inch) - 2.25 MHz
Dakota Ultrasonics DFX-8 Flaw Detector and Thickness Gauge
- Flaw Detector Features TRIG: Trigonometric display of beam path, depth, surface distance, and curved surface correction - used with angle beam transducers DAC: Up to 16 points may be entered
- TRIG: Trigonometric display of beam path, depth, surface distance, and curved surface correction - used with angle beam transducers
- DAC: Up to 16 points may be entered and used to digitally draw a DAC curve - reference -2, -6, -10, (-6/-12), (-6/-14), (-2/-6/-10) dB
Krautkramer Branson CL3 DL Portable Ultrasonic Thickness Gauge
Cygnus Instruments DIVE Underwater Ultrasonic Thickness Gauge
- 2.25 MHz = 3.0 to 250 mm
- 3.5 MHz = 2.0 to 150 mm
- 5.0 MHz = 1.0 to 50 mm
Checkline TI-25MX Ultrasonic Wall Thickness Gauge
- Includes NIST Traceable Calibration Certificate)
- Switch-selected units for inches or mm
- User-selected Manual or Auto Zero of Transducer
