Additel 762 Automated Hydraulic Pressure Calibrator
- Automated pressure generation and control to 10,000 psi (700 Bar)
- Accuracy to 0.01%FS
- Dual-range calibration
Fluke 6270A Pressure Controller/Calibrator
- Calibrate a wide range of gauges and sensors with a single instrument
- Modular configuration makes this a versatile and economical solution
- Easy to operate
Keysight N4693A Electronic Calibration Module
- 10 MHz to 50 GHz frequency range
- USB interface for direct control with PNA and ENA series of network analyzers
- Fast calibration
Keysight 85056A Standard Mechanical Calibration Kit 50 GHz
- DC to 50 GHz frequency range
- Calibration standards to perform full two-port calibration
- Torque wrenches for properly connecting standards
Keysight 85052B Standard Mechanical Calibration Kit
- DC to 26.5 GHz frequency range
- Calibration standards to perform full two-port calibration
- Torque wrenches for properly connecting standards
Keysight N5262AC15 Banded Millimeter Wave Calibration Kit
- Banded Millimeter Wave Calibration Kit
- Part of Keysight's series of wave network analysis solutions
- A frequency range of 50 to 75 GHz
Keysight N5262AC12 Banded Millimeter Wave Calibration Kit
- Part of Keysight's series of N5262A wave network analysis solutions
- Virginia Diodes Inc. calibration kit
- A frequency of 60 to 90 GHz
Maury Microwave 8650CK10 Calibration Kit
Keysight 85131F Flexible Cable Set, 3.5 mm
Crystal XP2i Series Pressure Gauge
- Specified in percent of reading like deadweight testers
- Easy to read display, day or night
- 5 full digits, great for leak testing
Keysight 85093C RF Electronic Calibration (ECal) Module | 3.5mm
- 300 kHz to 9 GHz frequency range
- Fast full two-port calibration with a single connection
- Simple non-insertable device calibration
Keysight 85051B Verification Kit, 7 mm
- 20 dB attenuator
- 50 dB attenuator
- 25Ω mismatch airline
Keysight 85033E Calibration Kit, DC - 9 GHz, 3.5 mm
Keysight 85032F Calibration Kit, DC - 9 GHz, Type- N
Keysight 85032B Calibration Kit, Type-N, 50 ohms
Keysight 85033A SMA Calibration Kit
- DC to 9 GHz frequency range
- Connector type to DUT is 7mm
Druck DPI 800 Pressure Indicator
- Ranges from 10 in H2O to 10,000 psi (25 mbar to 700 bar)
- Single or dual range configuration
- IDOS pressure sensors provide accuracies to 0.05% FS all-inclusive or 0.01% precision
Fluke 719Pro 300G Electric Pressure Calibrator
- 300 psi pressure ranges
- Pressure measurement from internal or external sensor
- Sourced/simulated or measured mA values
Additel 780 Pressure Calibrator
- Pressure ranges up to 1,000 psi or 3,000 psi (depending on model)
- Removable interchangeable intelligent sensors
- Precision accuracy models to 0.01% of reading
Fluke 2271A Industrial Pressure Calibrator
- Calibrate a wide range of gauges and sensors with a single instrument
- Two levels of accuracy, 0.01% reading or 0.02% FS
- Wide measurement range from -100 kPa to 20 MPa (-15 to 3000 psi)
Additel 793 Pressure Controller/Generator
- Maximum pressure control range to 15000 psi (1000 bar)
- Interchangeable pressure module
- Oil and water versions available
Additel 773 Pressure Controller/Generator
- Pressure ranges from -380 in H2O (-0.95 bar) to 400 inH2O (1 bar)
- Two removable internal pressure modules with multi-range selection
- Control stability of 0.003% FS
Fluke 7250 Series Pressure Controller/Calibrators
- Pressure ranges from 0 to 5 and 0 to 3 000 psi (0 to 35 kPa and 0 to 21 MPa)
- Model 7250xi and 7250i provide advanced precision of 0.005% of reading
- Model 7250 provides 0.003% of full scale precision
Druck DPI 610HC Portable Hydraulic Pressure Calibrator
- Ranges -14.7 to 10,000 psi
- Accuracy from 0.025% full scale (FS)
- Integral combined pressure/vacuum pump
Additel 783 Pressure Controller
- Pressure ranges from -14.35 psi (-0.99 bar) to 3600 psi (250 bar)
- Two removable internal pressure modules with multi-range selection
- 0.02% FS, 0.01% FS, and 0.01% RD accuracy