Related Products

Keysight N5230C PNA-L Microwave Network Analyzer
- 300 kHz – 20 GHz
- Up to 122 dB (10 MHz – 6 GHz)
- 2 or 4 ports

Keysight N5225B PNA Microwave Network Analyzer
- Frequency Range | 900 Hz-50 GHz
- Dynamic Range | 127 dB
- Harmonics | -60 dBc

Keysight 8722ES Vector Network Analyzer
- 50 MHz – 40 GHz
- Up to 110 dB
- 2 Ports

Keysight N9928A FieldFox Handheld Microwave Vector Network Analyzer, 26.5 GHz
- Configure as a full, two-port VNA, time-domain reflectometer, vector voltmeter, cable and antenna analyzer, and more
- Measure all four S-parameters simultaneously with a single connection and up to 95 dB of dynamic range
- Perform accurate testing with QuickCal, full two-port unknown thru Cal, and Thru, Reflect, Line (TRL) calibration in the field

Keysight N9951A FieldFox Handheld Microwave Analyzer
- Frequency Range: 300 kHz – 44 GHz
- Dynamic Range: Up to 110 dB
- 2 Ports

Keysight 85056A Standard Mechanical Calibration Kit 50 GHz
- DC to 50 GHz frequency range
- Calibration standards to perform full two-port calibration
- Torque wrenches for properly connecting standards

Keysight N4693A Electronic Calibration Module
- 10 MHz to 50 GHz frequency range
- USB interface for direct control with PNA and ENA series of network analyzers
- Fast calibration

Keysight FieldFox N9923A Network Analyzer (Agilent N9923A)
- Built-in QuickCal technology enables calibration without a cal kit
- Best measurement stability over time and temperature
- Industry´s only handheld network analyzer with MIL PRF 28800F Class 2 compliance with no exceptions

Keysight 85052B Standard Mechanical Calibration Kit
- DC to 26.5 GHz frequency range
- Calibration standards to perform full two-port calibration
- Torque wrenches for properly connecting standards

Keysight N5262AC15 Banded Millimeter Wave Calibration Kit
- Banded Millimeter Wave Calibration Kit
- Part of Keysight's series of wave network analysis solutions
- A frequency range of 50 to 75 GHz

Keysight N5262AC12 Banded Millimeter Wave Calibration Kit
- Part of Keysight's series of N5262A wave network analysis solutions
- Virginia Diodes Inc. calibration kit
- A frequency of 60 to 90 GHz

Maury Microwave 8650CK10 Calibration Kit


Keysight 85131F Flexible Cable Set, 3.5 mm

OMICRON Bode 100 Vector Network Analyzer 1 Hz - 40 MHz
- Swept S-parameters in the 50 system
- Reflection coefficient and return loss
- Insertion loss of filters


Keysight 85051B Verification Kit, 7 mm
- 20 dB attenuator
- 50 dB attenuator
- 25Ω mismatch airline

Keysight 85033E Calibration Kit, DC - 9 GHz, 3.5 mm

Keysight 85032F Calibration Kit, DC - 9 GHz, Type- N

Keysight 85032B Calibration Kit, Type-N, 50 ohms

Keysight 85033A SMA Calibration Kit
- DC to 9 GHz frequency range
- Connector type to DUT is 7mm

Rohde & Schwarz ZVL Vector Network Analyzers 9 kHz - 13.6 GHz
- Optional spectrum analysis and digital communications standards
- Bidirectional test set for displaying all four S-parameters
- R&S®ZVL3-75: 75 Ω vector network analyzer for TV and CATV measurements


Rohde & Schwarz ZVB20 Vector Network Analyzer 4 ports, 20 GHz
- Reflectometers with separate measurement and reference channels
- Parallel measurements on multiple ports
- Data processing and transfer simultaneously with measurement


Rohde & Schwarz ZVA8 Vector Network Analyzer
- Linear and nonlinear amplifier and mixer measurements
- Noise figure measurements
- Pulse profile measurements with 12.5 ns resolution


Rohde & Schwarz ZVA40 Vector Network Analyzer 4 ports, 40 GHz
- Linear and nonlinear amplifier and mixer measurements
- Noise figure measurements
- Pulse profile measurements with 12.5 ns resolution


Rohde & Schwarz ZNB8 Vector Network Analyzer
- Wide dynamic range of up to 140 dB
- Short sweep times of 4 ms for 401 points
- High temperature stability of typ. 0.01 dB/°C


Tektronix TTR506 Vector Network Analyzer
- Frequency range: 100 kHz – 6 GHz
- Dynamic range: Up to 122 dB
- 2 ports
