Additel 762 Automated Hydraulic Pressure Calibrator
- Automated pressure generation and control to 10,000 psi (700 Bar)
- Accuracy to 0.01%FS
- Dual-range calibration
Fluke 6270A Pressure Controller/Calibrator
- Calibrate a wide range of gauges and sensors with a single instrument
- Modular configuration makes this a versatile and economical solution
- Easy to operate
Crystal XP2i Series Pressure Gauge
- Specified in percent of reading like deadweight testers
- Easy to read display, day or night
- 5 full digits, great for leak testing
Druck DPI 802 Pressure Calibrator
- Single or dual range configuration
- IDOS pressure sensors provide accuracies to 0.05% FS all-inclusive or 0.01% precision
- mA measure, switch test and 24V loop power
Druck DPI610E Pressure Calibrator Series
- 100,000 point data logging memory
- HART communication as standard on all versions
- Integral calibration record with calibration due countdown
Druck DPI 800 Pressure Indicator
- Ranges from 10 in H2O to 10,000 psi (25 mbar to 700 bar)
- Single or dual range configuration
- IDOS pressure sensors provide accuracies to 0.05% FS all-inclusive or 0.01% precision
Druck DPI 611-13G Hand-held Pressure Calibrator
- 50% smaller and 33% lighter than the DPI 610
- Creates 95% vacuum
- Pressure measurement is twice as accurate
Druck DPI 611-07G Hand-held Pressure Calibrator
- 50% smaller and 33% lighter than the DPI 610
- Creates 95% vacuum
- Pressure measurement is twice as accurate
Druck DPI 611 Hand-held Pressure Calibrator Series
- 50% smaller and 33% lighter than the DPI 610
- Generates 0 to 20 bar/300 psi in less than 30 seconds
- Creates 95% vacuum
Druck DPI 610PC Pressure Calibrator
- -14.7 - 10,000 PSI
- Pressure Generation: -22 inHg - 300 psi
- Accuracy: ±0.025% full scale
Additel 917-N-Set Pneumatic Pressure Test Pump
- Portable, only 5.7 lb
- Great stability and high resolution
- Minimal maintenance
Additel 793 Pressure Controller/Generator
- Maximum pressure control range to 15000 psi (1000 bar)
- Interchangeable pressure module
- Oil and water versions available
Additel 783 Pressure Controller
- Pressure ranges from -14.35 psi (-0.99 bar) to 3600 psi (250 bar)
- Two removable internal pressure modules with multi-range selection
- 0.02% FS, 0.01% FS, and 0.01% RD accuracy
Additel 780 Pressure Calibrator
- Pressure ranges up to 1,000 psi or 3,000 psi (depending on model)
- Removable interchangeable intelligent sensors
- Precision accuracy models to 0.01% of reading
Additel 773 Pressure Controller/Generator
- Pressure ranges from -380 in H2O (-0.95 bar) to 400 inH2O (1 bar)
- Two removable internal pressure modules with multi-range selection
- Control stability of 0.003% FS
Additel 760 Automatic Handheld Pressure Calibrator
- Fully automatic calibrator with built-in pump and controller
- Switchable internal pressure modules for expandable ranges
- Accuracy of 0.02%FS
Fluke 729 300G Automatic Pressure Calibrator
- Automatic pressure generation
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
Fluke 729 150G FC Automatic Pressure Calibrator
- Automatic pressure generation
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
Fluke 729 Automatic Pressure Calibrator
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
Fluke 7250LP Low Pressure Calibrator
- 10 inH2O and 30 inH2O
- 20 inH2O and 60 inH2O
- 35 inH2O and 100 inH2O
Fluke 7250 Series Pressure Controller/Calibrators
- Pressure ranges from 0 to 5 and 0 to 3 000 psi (0 to 35 kPa and 0 to 21 MPa)
- Model 7250xi and 7250i provide advanced precision of 0.005% of reading
- Model 7250 provides 0.003% of full scale precision
Fluke 719Pro 30G Electric Pressure Calibrator
- Unique integrated electric pump for one handed pressure calibration
- Test pressure switches easily with easy-to-use switch test function
- Precision pressure adjust vernier for easy and accurate pressure calibration
Fluke 719Pro 300G Electric Pressure Calibrator
- 300 psi pressure ranges
- Pressure measurement from internal or external sensor
- Sourced/simulated or measured mA values
Fluke 719Pro 150G Electric Pressure Calibrator
- 150 psi pressure ranges
- Pressure measurement from internal or external sensor
- Sourced/simulated or measured mA values
Additel 673 Digital Pressure Calibrator
- Pressure ranges up to 60,000 psi (4,200 bar)
- 0.02%, 0.05% FS or 0.1% RD accuracy
- Color touchscreen display