Additel 762 Automated Hydraulic Pressure Calibrator
- Automated pressure generation and control to 10,000 psi (700 Bar)
- Accuracy to 0.01%FS
- Dual-range calibration
King Nutronics 3750 Portable Pressure Calibrator
- The U.S. Navy’s hand pump of choice for shipboard calibration on all of its ships and submarines
- Pneumatic and hydraulic pressure output from one pump
- Constructed with stainless steel and advanced corrosion protection
Fluke 6270A Pressure Controller/Calibrator
- Calibrate a wide range of gauges and sensors with a single instrument
- Modular configuration makes this a versatile and economical solution
- Easy to operate
Crystal XP2i Series Pressure Gauge
- Specified in percent of reading like deadweight testers
- Easy to read display, day or night
- 5 full digits, great for leak testing
Fluke 700PTP-1 Pneumatic Test Pump
- Pump can be easily cleaned without disassembly
- The vernier can be used as a stand-alone low pressure calibration source
- Two pressure ports allowing simultaneous connection:
Druck PV411A Calibration Pump Kit
- Pressure: <10,000 psi
- Uses distilled water or mineral oil
- Hydraulic, pneumatic, vacuum, low-pressure hand pump functions
Beamex PGC Pressure/Vacuum Pump Kit
- Lightweight and user-friendly hand pump kit
- Pressure range of -13.7 to 510 psi (-0.95 to 35 bar)
- G1/8" and G1/4" fitting connectors
Druck DPI 802 Pressure Calibrator
- Single or dual range configuration
- IDOS pressure sensors provide accuracies to 0.05% FS all-inclusive or 0.01% precision
- mA measure, switch test and 24V loop power
Druck DPI610E Pressure Calibrator Series
- 100,000 point data logging memory
- HART communication as standard on all versions
- Integral calibration record with calibration due countdown
Druck DPI 800 Pressure Indicator
- Ranges from 10 in H2O to 10,000 psi (25 mbar to 700 bar)
- Single or dual range configuration
- IDOS pressure sensors provide accuracies to 0.05% FS all-inclusive or 0.01% precision
Druck DPI 611-13G Hand-held Pressure Calibrator
- 50% smaller and 33% lighter than the DPI 610
- Creates 95% vacuum
- Pressure measurement is twice as accurate
Druck DPI 611-07G Hand-held Pressure Calibrator
- 50% smaller and 33% lighter than the DPI 610
- Creates 95% vacuum
- Pressure measurement is twice as accurate
Druck DPI 611 Hand-held Pressure Calibrator Series
- 50% smaller and 33% lighter than the DPI 610
- Generates 0 to 20 bar/300 psi in less than 30 seconds
- Creates 95% vacuum
Druck DPI 610PC Pressure Calibrator
- -14.7 - 10,000 PSI
- Pressure Generation: -22 inHg - 300 psi
- Accuracy: ±0.025% full scale
Druck DPI 610HC Portable Hydraulic Pressure Calibrator
- Ranges -14.7 to 10,000 psi
- Accuracy from 0.025% full scale (FS)
- Integral combined pressure/vacuum pump
Crystal Engineering CrystalCalHP Calibration System
- Gauge, chart recorder, transmitter, and calibration system
- 7 to 10 times faster than most deadweight testers
- Reduce transcription / calculation errors
Additel 920 Calibration Hand Pump
- Generate 95% vacuum to 3,000 psi (200 bar) pressure
- Generate 3,000 psi (200 bar) in 40 seconds
- Minimal maintenance
Additel 917-N-Set Pneumatic Pressure Test Pump
- Portable, only 5.7 lb
- Great stability and high resolution
- Minimal maintenance
Additel 793 Pressure Controller/Generator
- Maximum pressure control range to 15000 psi (1000 bar)
- Interchangeable pressure module
- Oil and water versions available
Additel 783 Pressure Controller
- Pressure ranges from -14.35 psi (-0.99 bar) to 3600 psi (250 bar)
- Two removable internal pressure modules with multi-range selection
- 0.02% FS, 0.01% FS, and 0.01% RD accuracy
Additel 780 Pressure Calibrator
- Pressure ranges up to 1,000 psi or 3,000 psi (depending on model)
- Removable interchangeable intelligent sensors
- Precision accuracy models to 0.01% of reading
Additel 773 Pressure Controller/Generator
- Pressure ranges from -380 in H2O (-0.95 bar) to 400 inH2O (1 bar)
- Two removable internal pressure modules with multi-range selection
- Control stability of 0.003% FS
Additel 760 Automatic Handheld Pressure Calibrator
- Fully automatic calibrator with built-in pump and controller
- Switchable internal pressure modules for expandable ranges
- Accuracy of 0.02%FS
Fluke 729 300G Automatic Pressure Calibrator
- Automatic pressure generation
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
Fluke 729 150G FC Automatic Pressure Calibrator
- Automatic pressure generation
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment