Fluke 1550C Insulation Resistance Tester 5 kV
- Test voltages up to 5 kV provides solutions for all applications
- CAT III 1000 V, CAT IV 600 V safety rating
- Voltage breakdown detection alerts the user that voltage is present and gives the voltage reading up to 600 V ac or dc for increased user safety
Megger S1-1068 Insulation Resistance Tester
- Resistance measurement: 15 TΩ - 5 kV, 35 TΩ - 10 kV, 35 TΩ - 15 kV
- High current – 6 mA short circuit current
- High noise immunity – 8 mA of noise rejection
Megger S1-1568 Insulation Resistance Tester
- Resistance measurement: 15 TΩ - 5 kV, 35 TΩ - 10 kV, 35 TΩ - 15 kV
- High current – 6 mA short circuit current
- High noise immunity – 8 mA of noise rejection
Megger MIT1025 Diagnostic Insulation Resistance Tester
- Measures up to 20 TΩ
- PI, DAR, DD, SV and ramp test
- Improved productivity – operate from line power/mains if battery dead
AEMC 6555 Digital Megohmmeter
- Wide measurement range from 10kΩ to 30TΩ
- Fixed or programmable test voltage from 40V to 10kV
- 5mA charging current
Fluke 1625-2 GEO Earth Ground Tester
- 3- and 4-pole earth ground measurement
- 4-Pole soil resistivity testing
- 2-pole resistance measurement AC
High Voltage Ohm-Check Neutral Resistance Tester
- Cable to clamp-on meter, 10’
- Cables between reels & neutral, 10’
- Line cord 10’ & #2 Ground Cable, 20’
Megger MGFL100 Battery Ground Fault Locator
- Alarms when the real fault is identified
- Direct measurement of resistance and stray capacitance
- Direct measurement of fault current and leakage current
Megger S1-568 Insulation Resistance Tester
- Resistance: 15 TΩ - 5 kV, 35 TΩ - 10 kV, 35 TΩ - 15 kV
- High Current: 6mA short circuit current
- Noise Rejection: 8 mA
General Radio 1864 Megohmmeter
Megger MIT510 Insulation Resistance Tester 5 kV
- CAT IV 600 V
- Mains or battery powered
- Digital/Analogue backlit display
AEMC 6417
- 47 - 800 Hz
- Stores up to 2000 measurements
- 50, 60, 128, or 2083 Hz (user selectable)
AEMC 1060 1000V Megohmmeter
- True Megohmmeter
- Test voltage combinations of 50V, 100V, 250V, 500V and 1000V
- Insulation measurement to 4000GΩ (4TΩ)
AEMC 1050 Digital / Analog Megohmmeter | 1000 V
- Direct measurement of DAR and PI values
- Direct measurement of sample Capacitance
- Display of test voltage and run time
AEMC 6470 Multi-Function Ground Resistance Tester
- 3-Point Fall-of-Potential measurement with manual or automatic frequency selection
- 3-Point earth coupling measurement
- Automatic frequency scan from 40 Hz to 513 Hz for optimum test accuracy in electrically noisy environments
AEMC 6471 Ground Resistance Tester
AEMC 6474 Ground Resistance Tester
AEMC 5060 5000V Digital / Analog Megohmmeter
- True megohmmeter®
- Test voltage combinations of 500V, 1000V, 2500V and 5000V
- Insulation measurements from 30kΩ to 10,000GΩ (10TΩ)
AEMC 4630 4-Point Ground Resistance Tester
- Measures soil resistivity (4-Point) method
- Measures ground resistance (2- and 3-Point) Fall-of-Potential method
- Step voltage tests and touch potential measurements
AEMC 4610 Ground Resistance Tester
- Fall-of-Potential method
- Measures ground resistance (2- and 3-Point) and soil resistivity (4-Point)
- Step voltage tests and touch potential measurements
AEMC 4500 20k ohm 4 Point Ground Resistance Tester
- Measures soil resistivity (4-Point)
- Measures ground resistance (2 and 3 Point) Fall-of-Potential Method
- Step voltage tests and touch potential measurements
Megger DET2/2
- High resolution – 1 mΩ
- High accuracy for earth electrode and soil resistivity testing
- A robust, versatile instrument with IP54 protection
AEMC 6470-B Ground Resistance Tester
- 4-Pole (4-Point) Fall-of-Potential measurement for very low resistance measurements with manual or automatic frequency selection and automatic lead compensation
- 3-Point Fall-of-Potential measurement
- 3-Point earth coupling measurement
Megger S1-1054/2 Insulation Resistance Tester 10 kV
- CAT IV 600 V
- Charge current: 5 mA
- 4 mA noise rejection and software filtering
Fluke 1555 Insulation Resistance Tester
- Test voltages of up to 10 kV
- Cat III 1000V, CAT IV 600V safety rating
- Voltage breakdown detection alerts the user that voltage is present and gives the voltage reading up to 600V AC or DC for increased user safety