Fluke 1550C Insulation Resistance Tester 5 kV
- Test voltages up to 5 kV provides solutions for all applications
- CAT III 1000 V, CAT IV 600 V safety rating
- Voltage breakdown detection alerts the user that voltage is present and gives the voltage reading up to 600 V ac or dc for increased user safety
Megger S1-1068 Insulation Resistance Tester
- Resistance measurement: 15 TΩ - 5 kV, 35 TΩ - 10 kV, 35 TΩ - 15 kV
- High current – 6 mA short circuit current
- High noise immunity – 8 mA of noise rejection
Megger S1-1568 Insulation Resistance Tester
- Resistance measurement: 15 TΩ - 5 kV, 35 TΩ - 10 kV, 35 TΩ - 15 kV
- High current – 6 mA short circuit current
- High noise immunity – 8 mA of noise rejection
Megger MIT1025 Diagnostic Insulation Resistance Tester
- Measures up to 20 TΩ
- PI, DAR, DD, SV and ramp test
- Improved productivity – operate from line power/mains if battery dead
AEMC 6555 Digital Megohmmeter
- Wide measurement range from 10kΩ to 30TΩ
- Fixed or programmable test voltage from 40V to 10kV
- 5mA charging current
General Radio 1864 Megohmmeter
Megger MIT510 Insulation Resistance Tester 5 kV
- CAT IV 600 V
- Mains or battery powered
- Digital/Analogue backlit display
General Radio 1863 Megohmmeter
Megger S1-568 Insulation Resistance Tester
- Resistance: 15 TΩ - 5 kV, 35 TΩ - 10 kV, 35 TΩ - 15 kV
- High Current: 6mA short circuit current
- Noise Rejection: 8 mA
Megger S1-1054/2 Insulation Resistance Tester 10 kV
- CAT IV 600 V
- Charge current: 5 mA
- 4 mA noise rejection and software filtering
Fluke 1555 Insulation Resistance Tester
- Test voltages of up to 10 kV
- Cat III 1000V, CAT IV 600V safety rating
- Voltage breakdown detection alerts the user that voltage is present and gives the voltage reading up to 600V AC or DC for increased user safety
Megger MIT2500 CAT IV Insulation Tester
- Insulation testing up to 2.5 kV and 200 GΩ range in a hand held instrument
- Guard terminal for high resistance accuracy
- Adjustable insulation test voltage from 50 V to 2500 V
AEMC 1060 1000V Megohmmeter
- True Megohmmeter
- Test voltage combinations of 50V, 100V, 250V, 500V and 1000V
- Insulation measurement to 4000GΩ (4TΩ)
Megger MIT525 Insulation Resistance Tester
- Industry best guard terminal accuracy
- Compact and lightweight for easy transport and use PI, DAR, DD, SV and ramp test
- Unique dual case design provides additional user protection
Megger MIT1020/2 10 kV Insulation Resistance Tester
- Increased measurement range to 35 Tera- ohms, in order to provide trending values for the best of insulating materials and highest capital equipment
- Expanded test voltage range from 50 V to 10 kV, in 10 V increments to 1 kV and 25 V increments above 1 kV
- Additional automated standardized tests to include Step Voltage, Dielectric Absorption Ratio and Dielectric Discharge tests
Fluke 1587 Insulation Multimeter
- Insulation test voltages 50 volts; 100 volts; 250 volts; 500 volts; 1,000 volts
- Live circuit detection prevents insulation test if voltage of more than 30 volts is detected
- Auto-discharge of capacitive voltage for added user protection
Phenix Technologies PAD-10-25 AC/DC Hipot Megohmmeter
- Lightweight, portable and enclosed in a rugged carrying case
- Large, easy to read meters
- Adjustable overcurrent trip point
Megger S1-5010 Diagnostic Insulation Tester
- High specification 5 kV tester
- Automatic test sequences
- PC control and display option
Megger MIT515 5 kV Insulation Resistance Tester
- Industry best guard terminal accuracy
- Compact and lightweight for easy transport and use PI, DAR, DD, SV and ramp test
- Unique dual case design provides additional user protection
AEMC 6472 Ground Resistance Tester
- 4-Pole (4-Point) Fall-of-Potential measurement for very low resistance measurements with manual or automatic frequency selection and automatic lead compensation
- 3-Point Fall-of-Potential measurement
- 3-Point earth coupling measurement
Fluke 1520 Megohmmeter
- Three output voltages for insulation resistance testing: 250V, 500V, 1000V
- Insulation resistance testing up to 4000 Meg ohms; switches automatically to voltage measurement when voltage is greater than 30VAC or 30VDC.
- AC/DC voltage measurement up to 600V
Phenix PM5A Hipot/Megohmmeter 5000 V
- Battery Powered Operation
- Automatic operation with microprocessor control
- Guard circuit for stray leakage current bypass
AEMC 1050 Digital / Analog Megohmmeter | 1000 V
- Direct measurement of DAR and PI values
- Direct measurement of sample Capacitance
- Display of test voltage and run time
Megger S1 Insulation Resistance Tester Series
- Resistance measurement: 15 TΩ - 5 kV, 35 TΩ - 10 kV, 35 TΩ - 15 kV
- High current – 6 mA short circuit current
- High noise immunity – 8 mA of noise rejection
Fluke 1550B Megohmmeter
- Test voltages of 250V, 500 V, 1000 V, 2500 V, and 5000 V
- Capable of testing in 50V increments between 250V and 1000V and 100V increments between 1000V and 5000V
- Measures 0 to 1 Tera- ohms