BMT USA Climacell EVO 707 Environmental Chamber
- Patented forced air convection system for precise uniformity achieved with vertical & horizontal air flow
- 0°C above ambient to 100°C
- Humidity controllable in 1% increments
Espec EHS-412M HAST Chamber
- Air-circulating fan for high-accuracy testing
- Color LCD touch panel
- Multilingual support
Maccor MTC-010 Temperature Chamber
- Addressable chamber controllers
- Ability to set chamber temperature directly from Maccor’s Test System Software
- Compact design allows the chamber to easily fit onto a bench top
Memmert HPP110ECO Constant Climate Chamber
- Custom chamber designed to reach 10% RH at 10°C (achieved by adding compressed air dehumidification system, HPP/HPPlife, and ICH devices. Requires customer to provide an air compressor)
- 10 - 90% RH dehumidification
- Maximum energy efficiency in continuous operation
Espec SU-662 Thermal Chamber
- Full-size chamber performance in a compact design
- Standard equipped instrumentation interlock input/output terminals
- Optimization of the chamber top space
BMT Vacucell EVO 55 Vacuum Drying Oven
- Ideal for temperature sensitive, easily decomposable, or oxidative materials
- IP rating of IP20
- 5.7” LCD touch digital display
Cincinnati Sub-Zero MCH-3 Temperature and Humidity Chamber
- EZT-430i touch screen controller
- Ethernet & RS-232 computer interface
- 3" (8 cm) port for ease of cable routing – larger sizes available
Memmert IF110 Forced-Air Incubator
- ControlCockpit which is an adaptive multifunctional digital PID-micropresser controller with high definition TFT-color display
- Adjustable digital timer that ranges from 1 minute to 99 days
- Function SetpointWait which allows the process time not to start until target temperature is reached
Espec SU-242 Temperature and Humidity Chamber
- Greater cable port compatibility
- Optimization of chamber footprint
- Selection of water supply method
Tenney Benchmaster Temperature & Humidity Chamber
- 20% - 85%
- -30°C
- 200°C
Thermotron SE-1200 Temperature & Humidity Chamber
- 41.8 ft³
- -70°C to 180°C
- 10% - 95% RH
Espec CSH Series Stability Test Chambers
- ±1°C/±5%rh guaranteed
- Virtual Air Jacket System
- Smooth specimen access
BMT USA Climacell EVO 1212 Environmental Chamber
- Patented forced air convection system for precise uniformity achieved with vertical & horizontal air flow
- 0°C above ambient to 100°C
- Humidity controllable in 1% increments
Espec BTL-433 Temperature & Humidity Chamber
- High performance and quiet operation (65 dBa)
- Space-saving footprint, designed for flush installation to wall
- Stainless steel exterior
GE Panametrics MG101 Hygrometer Calibration System
- Field calibration system for verifying or calibrating moisture and humidity sensors
- Generates precise, repeatable levels of water vapor in a carrier gas
- Generation range is -103°F to 50°F (–75°C to 10°C) frost/dew point (at typical ambient temperatures)
Associated Environmental Systems SD-308 Benchtop Thermal Chamber
- High performance programmable controller
- RS232 interface
- Stainless steel welded interior
Cincinnati Sub-Zero MicroClimate 3 Compact Environmental Chambers
- EZT-430i touch screen controller
- Ethernet & RS-232 computer interface
- 3" (8 cm) access port
Tenney UTRC Temperature and Humidity Test Chamber
- Vapor-tight, continuously welded stainless steel interiors
- Cascade- type refrigeration system
- Vertical recirculation conditioning system
Sigma Systems M600MM -100°C to +200°C, Cryogenic Cooler
Tenney TC10RC Cycling Test Chambers
- Watlow F4T controller
- Air cooled refrigeration
- Solid state gsdg sensor when humidity option is purchased
Espec SU-241 Temperature Chamber
- User-friendly touch-screen operation
- Three different ‘constant mode’ settings can be saved for single-setting operation
- Store 40 cycling programs, with up to 99 steps each
Thermotron SE-300 Temperature & Humidity Chamber
- 4” thick door and 4.5” thick walls
- Advanced air baffle design
- Full range reaches dewpoints between -10°C and 87°C
BMT USA Climacell EVO Series Environmental Chamber
- Patented forced air convection system for precise uniformity achieved with vertical & horizontal air flow
- 0°C above ambient to 100°C
- Humidity controllable in 1% increments
Espec EGNX12 Global-N Temperature Cycling Chamber -70°C to 180°C
- SCP-220 touch-screen programmer for easy operation
- High performance, reliable Copeland Scroll compressors
- Lower sound levels, even for air-cooled models (click on model numbers to see specs)
Cincinnati Sub-Zero Z-32-2-2-H/AC Temperature Chamber
- Cascade: -73ºC (-100ºF) to 190ºC (375ºF)
- Single Stage: -34ºC (-30ºF) to 190ºC (375ºF)
- Humidity control within 10% to 95%