Ophir 5395 Solid State Broadband High-Power RF Amplifier 6

Ophir 5395 Solid State Broadband High-Power RF Amplifier 6 - 18 GHz, 12 Watts

The Ophir 5395 Solid State Broadband High-Power RF Amplifier is a small and lightweight amplifier that utilizes Class A/AB linear power devices to provide an excellent 3rd order intercept point, high gain, and a wide dynamic range. Ophir 5395 RF amplifiers can achieve high-efficiency operation with proven reliability. Ophir 5395 Solid State Broadband High-Power RF Amplifiers have RF connectors located on the front panel. The AC input receptacle is located at the rear of the 5395 amplifier.

Advanced Amplifiers AA-618G-300 Solid State Amplifier

6.0 - 18.0 GHz
300 W
55 dB min

Advanced Amplifiers AA-28G-400 Solid State CW/Pulse Amplifier

2.0 - 8.0 GHz
400 W
56 dB min

Amplifier Research 750S1G6 | 750 W (1 - 4.2 GHz), 500 W (4.2 - 6 GHz)

100% mismatch tolerant
Built-in fault monitoring and protection
Remote control: Ethernet, USB, GPIB, fiber-optic serial, RS-232

IFI S21-2000 Solid State Power Amplifier, 2kW

2000W
0.8 - 2GHz
Solid state design

Advanced Amplifiers AA-2640G-40 Solid State Amplifier

26.5 - 40.0 GHz
40 W
46 dB min

Advanced Amplifiers AA-118G-50 Solid-State High Power Amplifier

1.0 - 18.0 GHz
50 W
47 dB min

Advanced Amplifiers AA-618G-40 Solid State Amplifier

6.0 - 18.0 GHz
40 W
46 dB min

IFI S61-100 Solid State Microwave Amplifier 1 GHz - 6 GHz

Solid State Design
Gain Control
Module & System Temp-Monitoring

IFI ST81-50 Solid State/TWT (CW) Amplifier 1.0 GHz - 8.0 GHz, 50 Watt

VSWR Protection against an output mismatch
Alternate Prime Power
GPIB IEEE 488 Remote Control

Advanced Amplifiers AA-16G-300 Solid State Amplifier

1.0 - 6.0 GHz
300 W
53 dB min

Amplifier Research 40S6G18-L Solid State CW Amplifier, 6 GHz - 18 GHz, 40 Watts

6 GHz to 18 GHz frequency range
40 W, M2 & M5
GPIB / IEEE-488 format

Rohde & Schwarz BBA150 Broadband Amplifier, 9KHz - 6 GHz, 1000 Watts

One of the most advanced broadband amplifiers on the market Sophisticated RF design Compact and lightweight Series production in one of Europe's most progressive plants
Sophisticated RF design
Compact and lightweight

Advanced Amplifiers AA-1826G-40 Solid State Amplifier

18.0 - 26.5 GHz
40 W
46 dB min

Advanced Amplifiers AA-2640G-200 Solid State Power Amplifier

26.5 - 40.0 GHz
200 W
53 dB min

Amplifier Research 100S1G4 Solid State Amplifier

Portable, self-contained, and air-cooled
Designed instantaneous bandwidth, high gain, and linearity required applications
Digital Control Panel (DCP) which provides both local and remote control

Advanced Amplifiers AA-16G-150 Solid State Amplifier

1.0 - 6.0 GHz
150 W
50 dB min

Advanced Amplifiers AA-618G-100 Solid State Amplifier

6.0 - 18.0 GHz
100 W
50 dB min

Empower 2170 Solid State Broadband High Power Amplifier 1 GHz - 3 GHz, 1000 W

Solid-state linear design
Suitable for CW, AM, FM and pulse (consult factory for other modulation types)
Compact modular design

Prâna SX 70/15 D Dual-Band Solid State RF Amplifier | 0.8 GHz – 6 GHz, 70 W/15 W

Dual-band solid state RF amplifier
Frequency bandwidth of 0.8 GHz to 6 GHz
Typical output power of 70 W/15 W

Advanced Amplifiers AA-700M6G-300 Solid State Amplifier

0.7 - 6.0 GHz
300 W
53 dB min

Advanced Amplifiers AA-80M1G-300 Solid State Amplifier

80.0 MHz - 1.0 GHz
300 W
54 dB ± 2.0 dB min

Amplifier Research 75S1G6C Microwave Solid-State Amplifier

75 Watts CW, 1.0-6.0 GHz
Class A design
Built-in fault monitoring and protection

IFI SMC1500 Solid State Amplifier 80 - 1000MHz, 1500W

1500 W
80 - 1000 MHz
Instantaneous broadband frequency range

IFI SMCC1000 Solid State Amplifier

VSWR Reflected Power Protection
Open and Short Circuit Protection
GPIB IEEE 488 and RS232 Remote Control

Frequency range	6 – 18 GHz
Saturated output power	12 Watts typical 10 Watts minimum
Small signal gain	+43 dB minimum
Power gain flatness	Pin: 0 dBm; ≤ ±2.5 dB
Input/Output impedance	50 Ohms nominal