Megger CI Cable Identifier
- Identifies a de-energized primary cable safely
- Identifies live secondary cables up to 240 VAC
- Avoids false positives
Radiodetection RD7200 Cable & Pipe Locator
- Speed, accuracy, and reliable performance
- Easy to setup and use
- High performance audio system and vibration alerts for noisy environments
Dynatel 2273M Cable/Fault Locator
- Locate cable and pipe path
- Measure cable/pipe, or Sonde depth with the push of a button
- Display relative signal current in the cable or pipe
Dynatel 7420 Tape Locator
- 6 active frequencies for direct connect
- Trace view mapping display mode
- 4 induction frequencies with maximum allowed output power
Megger Easyloc
- Locate underground cables and pipe lines quickly and effortlessly
- High dynamic range in passive mode
- Direct connection, inductive coupling and general induction active modes
3M Dynatel 2573-iD Cable/Pipe/Fault and Marker Locator
- Trace view mapping display mode
- 6 active frequencies for direct connect
- 4 induction frequencies with maximum allowed output power
Dynatel 505 Portable Cable and Conductor Identifier
Amprobe UAT-620 Underground Utilities Locator Kit
- Multiple tracing modes allow you to locate and trace energized and de-energized utilities in a variety of applications.
- The intuitive Transmitter automatically chooses the correct locating function based on the connected accessory and includes selectable 8/33 kHz frequencies.
- The Receiver’s high-contrast display allows for clear viewing in full sunlight and features an automatic backlight for shaded and dark areas.
Dynatel 1420-iD Electronic Marker System Locator
- Large backlit, high-resolution graphic display
- Locator PC tools software
- PC interface via standard RS232/USB
Dynatel 2250M Cable/Fault Locater System
- A easy-to-use system that requires very little operator training
- Trace a pipe or cable and locate markers along the way
- M-iD versions locate and read/write to all EMS-RFiD markers
Amprobe AT 5005 Underground Cable / Pipe Locator System
- Locates underground energized and de-energized wires, cables and pipes, eliminates exploratory digging in parking lots or under floors for buried pipes and wires
- Signal Select and Distortion Alert icon indicates clean signal of the traced line, versus "ghost" and "return" path signals coming from the neighboring lines
- Three testing modes for best accuracy: Passive Power Mode (50, 60, 100 and 120 Hz) – tracing energized lines conducting current Passive Radio Mode (RF) – using surrounding radio
Schonstedt XT-512 Underground Pipe and Cable Locator
- Operates on 512 Hz Frequency mode
- Passive detection of 50 Hz or 60 Hz, and sonde
- One button depth measurement
Amprobe AT-3500 Underground Cable Locator
- Locates underground energized and de-energized wires, cables, and pipes
- Three testing modes for best accuracy Passive power (50/60 Hz) Passive radio (RF) Active T-3500 signal generator with induction mode directly connected to the cable with test leads or
- Passive power (50/60 Hz)
Dynatel 573 Sheath Fault/Cable Locator
Dynatel 573DL Cable Fault Locator
Amprobe UAT-610 Underground Utilities Locator Kit
- Multiple tracing modes allow you to locate and trace energized and de-energized utilities in a variety of applications.
- The intuitive Transmitter automatically chooses the correct locating function based on the connected accessory and includes selectable 8/33 kHz frequencies.
- The Receiver’s high-contrast display allows for clear viewing in full sunlight and features an automatic backlight for shaded and dark areas.
Dynatel 500DL Precision Cable/Fault Locator
- Four operator-selectable frequencies
- Built-in voltmeter
- Built-in ohmseter
Leica DD130 Underground Cable Locator
- Extended trace range with an additional 512 Hz, 640 Hz frequencies
- Signal current measurement
- Increased depth detection up to 10 m (33 feet)
Dynatel 500 Cable Locator
- Portable, battery-operated tone set
- Locates path of buried or underground (UG) cables
- Locates cables without taking them out of service
Leica DD230 SMART Underground Utility Locator
- DX Field Shield Fast and easy transfer of locator data and site documentation.
- Fast and easy transfer of locator data and site documentation.
- DX Office Shield Provides product configuration, maintenance, and usage analysis.
Radiodetection RD7100 Underground Cable Locator
- Detect all commonly used RF utility markers with automatic depth estimation for faster, accurate surveys
- RD Map cell-phone app for the real-time creation of detailed buried utility maps
- Combined mode to scan simultaneously for cables, pipes and RF markers reducing surveying time
Megger L1070 Portable Locator
- Multiple frequencies
- Transmit/receive frequency (815 Hz, 8 kHz, 82 kHz)
- SONDE support
Schonstedt Rex Underground Pipe and Cable Locator
- Ultralight Design: Receiver + Transmitter = Under 7lbs
- Compact & Portable: Receiver retracts for easy carrying
- Multi-Frequency Versatility: 512 Hz, 33 kHz, and 82 kHz, plus 50/60 Hz passive and 512 Hz sonde detection
Amprobe AF-600 A-Frame Cable Ground Fault Locator
- Optional accessory for Amprobe UAT-600 Underground Utilities Locator Series
- Works in conjunction with the UAT-600-T Transmitter
- Locate cable and wires ground faults, sheath faults or pipeline coating defects (direct contact of the utility with the ground is required to pinpoint a fault)
Dynatel 573A Earth Fault/Cable Fault Locator