Fluke 6102 Micro-Bath Thermometer Calibrator

Rent Fluke 6102 Micro-Bath Thermometer Calibrators
Enlarge Image
Fluke Calibration 6102
Request Quote Print Page
Datasheet
Micro-Baths can be used anywhere for any type of sensor. The Model 6102 weighs 4.5 kg with the fluid. It's lighter and smaller than most dry-wells and has a spill-proof lid. Micro-Baths can even be transported with fluid in them. Display accuracy to ±0.25 °C for quick calibrations without a reference thermometer. With a 4.8 cm diameter, 14 cm deep tank, a Micro-Bath can calibrate any type of sensor including short, square, or odd-shaped sensors. The problems of fit and immersion are virtually eliminated by using a fluid medium rather than a dry-block calibrator. Fluke Micro-Baths are perfect for liquid-in-glass and bi-metal thermometers. All Micro-Baths have RS-232 ports and come with Interface-it software. Also included are contacts to Calibrate a thermal switch, eight set-point memory storage, ramp-rate adjust and over-temperature safety cutout.
 
Fluke Calibration 6102 Specs
Range: 35°C to 200°C (95°F to 392°F)
Accuracy: ± 0.25 °C
Stability: ± 0.02°C at 100°C (oil 5013)
± 0.03°C at 200°C (oil 5013)
Uniformity: ± 0.02°C
Resolution: 0.01°C/°F
Operating Temperature: 5°C to 45°C
Heating Time: 25°C to 200°C: 40 minutes
Cooling Time: 200°C to 100°C: 35 minutes
Well Size: 64 mm dia. x 140 mm deep (2.5 x 5.5 in) (working area is 48 mm [1.9 in] in diameter)
Size (WxHxD): 14 x 26 x 20 cm
(5.5 x 10.38 x 8 in)
Weight: 4.5 kg (10 lb) with fluid
Volume: 0.75 L (1.6 pints)
Power: 115 V ac (± 10%), 2.3 A or 230 V ac (± 10%), 1.1 A, switchable, 50/60 Hz, 270 W
Computer Interface: RS-232 included with free Interface-it software
NIST-Traceable Calibration: Data at 50°C, 100°C, 150°C, and 200°C