Keysight PA2203A IntegraVision Power Analyzer | 4 Channels, 3-Phase AC
- Operates like an oscilloscope, but makes measurements like a power analyzer
- Achieve 0.05% basic accuracy for superior measurement integrity
- The PA2201A comes with 2 power channels for single phase measurements and analysis; the PA2203 has 4 power channels for 3-phase measurement and analysis
Danisense 6 Channel Current Transducer System
- Compact 19” rack mount 1U height
- Current transducers’ output signals (current or voltage) available via 4mm banana plugs
- Individual or serial access to calibration windings of all 6 transducers via 4mm banana plugs
Yokogawa WT1806E Precision Power Analyzer
- 6 inputs on a high-resolution display
- Harmonic analyses
- Guaranteed accuracy across a wide range
Tektronix PA4000 Power Analyzer, DC - 1 MHz, 30 ARMS, 1000 VRMS
- 1 to 4 Input Modules allows several configurations to match your application
- High measurement accuracy of 0.04% (basic voltage & current accuracy) for demanding test requirements
- Dual internal current shunts for each module maximize accuracy for high- and low-current measurements
Keysight N6705A DC Power Analyzer | 600 W
- Easy to use R&D tool for sourcing and measuring DC voltage and current into the DUT
- Integrates capabilities of up to 4 Power Supplies, DMM, Scope, Arb and Data Logger
- Access all capabilities without programming; either use the front panel controls or the 14585A Control and Analysis Software
DaniSense DS600ID 600Arms Current Transducer
- 1ppm maximum linearity error
- Fluxgate loop technology
- DSUB 9 pin connection
Xitron 2503AH Series Power Analyzer
- 18-bit, 500 kHz sampling speed provides 0.05% basic accuracy
- Ultra-fast FFT’s per channel produce measurements in 10 ms
- 3000 V Peak, 50 Amp Peak internal shunt and Hall effect CT’s
NH Research S320 Power Supply Analyzer
- Level of flexibility normally associated with custom design instruments
- Ability to control DC power supplies along with DC dynamic loads within the same 5.25 in chassis
- Allows for power quality analysis
Danisense DS50ID 50Arms Current Transducer
- Linearity error maximum 8 ppm
- Fluxgate, closed loop compensated technology with fixed excitation frequency and second harmonic zero flux detection for best in class accuracy and stability
- Industry standard DSUB 9 pin connection
Voltech IEC555 Reference Impedance Network
Yokogawa WT500 Precision Power Analyzer
- Voltage Crest Factor set to 3: 15V, 30V, 60V, 100V, 150V, 300V, 600V, 1000V Crest Factor set to 6: 7.5V, 15V, 30V, 50V, 75V, 150V, 300V, 500V
- Crest Factor set to 3: 15V, 30V, 60V, 100V, 150V, 300V, 600V, 1000V
- Crest Factor set to 6: 7.5V, 15V, 30V, 50V, 75V, 150V, 300V, 500V
Yokogawa WT3004E Precision Power Analyzer
- Basic power accuracy: 0.01% of reading
- Both 2 A and 30 A input elements can be installed in a single unit
- Good readability: 8.4-inch LCD and the range indicator LEDs
Voltech PM3000A Universal Power Analyzer
- 0.05% basic accuracy
- Universal application: single-phase, three-phase, and DC rectifier measurements
- Harmonic analysis of voltage current and power on each phase and neutral to the 99th harmonic
Hioki PW6001
- High noise resistance and stability
- Accurate measurement even when the load is characterized by large fluctuations
- TrueHD 18-bit resolution
Yokogawa WT230 Digital Power Meter
- Maximum input with assured accuracy: 26 A
- Basic accuracy: 0.1%
- DC measurement: 0.5 Hz to 100 kHz frequency range
Yokogawa WT310E Digital Power Analyzer
- DC, 0.1Hz – 100kHz
- 5mA – 20A (direct input)
- Voltage Input: 15V – 600V
Valhalla 2105 Wide-Range Power Analyzer
- Up to 20 A / phase direct (self-contained shunt)
- Expandable to 1000 amps
- True power measurements, VI cos Ø
Yokogawa WT330 Digital Power Meter
- Basic accuracy: 0.1% of Reading
- DC measurement: 0.5 Hz to 100 kHz frequency range
- Measures all AC and DC parameters
Hioki U7005 Input Module | Precision Power Analyzer
- Input module for the PW8001 Precision Power Analyzer
- Basic accuracy for 50/60 Hz: Power ±0.03%
- Measurement frequency band (DC) of 0.1 Hz to 5 MHz
Yokogawa WT310HC Digital Sampling Power Analyzer
- Basic Accuracy of 0.1% of Reading
- Current Range: 1- 40A
- Voltage: 15-600 Volts RMS
Yokogawa WT333 Digital Power Meter 100 kHz, 3 Ch
- Basic accuracy of 0.1% of reading
- Low current measurement
- Wide current input ranges
Yokogawa WT3000 Precision Power Analyzer
- Basic accuracy: 0.01% of reading
- Basic power accuracy: 0.02% of reading
- 30A current input element
Yokogawa M1114BK IT 700-S Peak Current Transformer System IST
- 700 Amp Peak
- Current transfer ratio of 1750/1
- Functional for 1 to 6 CTs
Vitrek PA900 Precision Harmonic Power Analyzer
- Unprecedented range of capabilities
- Noise floor—as low as 1ppm vs 300ppm or more on competitive units
- Large, high-resolution color display: shows all the data you want with a touchscreen interface
Valhalla 2400 Wideband Spectrum Power Analyzer Series
- Suitable for stand-by, low power factor, and frequency inverter drivers
- IEEE, USB, RS-232, Ethernet, and Analog interfaces available
- Bright LCD with up to 10 measured values and wave form, bar graph, and trend plot visualizations