Danisense DS50ID 50Arms Current Transducer

Name: Danisense DS50ID 50Arms Current Transducer Rental
Brand: DaniSense
SKU: DANI-DS50ID-rent
Price: 79.00 USD
Availability: InStock

The DaniSense DS50ID Current Transducer is one of the industry's most accurate and precise CT for measuring up to 50A. With this accuracy, small currents can even be measured with a tolerance of +/-7.5mA. Useful for many 3 phase power applications, the DS50ID is a preferred current measurement device to be paired with a Power Analyzer. The accuracy and precision of this device comes from the fluxgate technology incorporated in the DS series.

Product Info Related Products

Parameter	Value
Nominal primary AC current	75Arms
Nominal primary DC current	-75A to 75A
Measuring range	-150A to 150A
Primary / secondary ratio	1:500
Linearity error	-8ppm to 8ppm
Offset current (including earth field)	-80ppm to 80ppm
DC-10Hz Overall accuracy @25°C	-88ppm to 88ppm
AC Maximum gain error 10Hz to 2kHz	±0.04%
Operating temperature range	-40°C to 85°C
Power supply voltages	±14.25V to ±15.75

Linearity error maximum 8 ppm
Fluxgate, closed loop compensated technology with fixed excitation frequency and second harmonic zero flux detection for best in class accuracy and stability
Industry standard DSUB 9 pin connection
Green diode for normal operation indication
Full aluminum body for superior EMI shielding and extended operating temperature range
Large aperture 27.6mm for cables and bus bars

MPS for particles accelerators
Gradient amplifiers for MRI devices
Stable power supplies
Precision drives
Batteries testing and evaluation systems
Power measurement and power analysis
Current calibration purposes

SKU: DANI-DS50ID

Yokogawa WT1806E Precision Power Analyzer

6 channels
Measurement bandwidth: DC, 0.1 Hz − 1 MHz
Current input (internal): 5 A/50 A

Keysight PA2203A IntegraVision Power Analyzer | 4 Channels, 3-Phase AC

Operates like an oscilloscope, but makes measurements like a power analyzer
Achieve 0.05% basic accuracy for superior measurement integrity
The PA2201A comes with 2 power channels for single phase measurements and analysis; the PA2203 has 4 power channels for 3-phase measurement and analysis

Danisense 6 Channel Current Transducer System

Compact 19” rack mount 1U height
AC Input: 85 - 264V, auto ranging
Frequency: 47 - 63Hz, auto ranging

Tektronix PA4000 Power Analyzer, DC - 1 MHz, 30 ARMS, 1000 VRMS

1 to 4 Input Modules allows several configurations to match your application
High measurement accuracy of 0.04% (basic voltage & current accuracy) for demanding test requirements
Dual internal current shunts for each module maximize accuracy for high- and low-current measurements

DaniSense DS600ID 600Arms Current Transducer

1ppm maximum linearity error
Fluxgate loop technology
DSUB 9 pin connection

Keysight N6705A DC Power Analyzer | 600 W

Easy to use R&D tool for sourcing and measuring DC voltage and current into the DUT
Integrates capabilities of up to 4 Power Supplies, DMM, Scope, Arb and Data Logger
Access all capabilities without programming; either use the front panel controls or the 14585A Control and Analysis Software

Xitron 2503AH Series Power Analyzer

18-bit, 500 kHz sampling speed provides 0.05% basic accuracy
Ultra-fast FFT’s per channel produce measurements in 10 ms
3000 V Peak, 50 Amp Peak internal shunt and Hall effect CT’s

NH Research S320 Power Supply Analyzer

Level of flexibility normally associated with custom design instruments
Ability to control DC power supplies along with DC dynamic loads within the same 5.25 in chassis
Allows for power quality analysis

Voltech IEC555 Reference Impedance Network

Yokogawa WT332E Digital Power Analyzer

3-phase, DC, 0.1 Hz – 100 kHz
15V – 600V, 5mA – 20A
±0.15% reading accuracy

Yokogawa WT310E Digital Power Analyzer

DC, 0.1Hz – 100kHz
5mA – 20A (direct input)
Voltage Input: 15V – 600V

Yokogawa WT5000 Precision Power Analyzer

Basic power accuracy of ±0.03%
10 MS/s, 1MHz power bandwidth
Peak voltage of 2.5 kV or RMS of 1.5kV

Yokogawa WT500 Precision Power Analyzer

Voltage Crest Factor set to 3: 15V, 30V, 60V, 100V, 150V, 300V, 600V, 1000V Crest Factor set to 6: 7.5V, 15V, 30V, 50V, 75V, 150V, 300V, 500V
Crest Factor set to 3: 15V, 30V, 60V, 100V, 150V, 300V, 600V, 1000V
Crest Factor set to 6: 7.5V, 15V, 30V, 50V, 75V, 150V, 300V, 500V

Yokogawa WT333 Digital Power Meter 100 kHz, 3 Ch

Basic accuracy of 0.1% of reading
Low current measurement
Wide current input ranges

Yokogawa WT332 Digital Power Meter 100 kHz, 2 Ch

Basic accuracy of 0.1% of reading
DC, 0.5 Hz to 100 kHz Frequency Range
Peak Value of 450A or RMS value of 300 A

Yokogawa WT330 Digital Power Meter

Basic accuracy: 0.1% of Reading
DC measurement: 0.5 Hz to 100 kHz frequency range
Measures all AC and DC parameters

Yokogawa WT310HC Digital Sampling Power Analyzer

Basic Accuracy of 0.1% of Reading
Current Range: 1- 40A
Voltage: 15-600 Volts RMS

Yokogawa WT310 Digital Power Meter

Basic accuracy: 0.1% of Reading
DC measurement: 0.5 Hz to 100 kHz frequency range
Measures all AC and DC parameters

Yokogawa WT3004E Precision Power Analyzer

Basic power accuracy: 0.01% of reading
Both 2 A and 30 A input elements can be installed in a single unit
Good readability: 8.4-inch LCD and the range indicator LEDs

Yokogawa WT3000 Precision Power Analyzer

Basic accuracy: 0.01% of reading
Basic power accuracy: 0.02% of reading
30A current input element

Yokogawa WT300 Series Digital Power Meters

Basic accuracy: 0.1% of Reading
DC measurement: 0.5 Hz to 100 kHz frequency range
Measures all AC and DC parameters

Yokogawa WT230 Digital Power Meter

Maximum input with assured accuracy: 26 A
Basic accuracy: 0.1%
DC measurement: 0.5 Hz to 100 kHz frequency range

Yokogawa WT210 Single Input Digital Power Meter

Basic power accuracy of 0.1%
DC measurement, 0.5 Hz to 100 kHz power frequency range
Compact design (half-rack size)

Yokogawa WT1806 Power Analyzer

DC Power Accuracy ±0.05%
Voltage/Current Frequency Range: 5 MHz
Voltage Range of 1.5 V to 1000 V