Keysight N5230C PNA-L Microwave Network Analyzer
- 300 kHz – 20 GHz
- Up to 122 dB (10 MHz – 6 GHz)
- 2 or 4 ports
Rohde & Schwarz ZNB8 Vector Network Analyzer
- Dynamic range: ≤ 140 dB
- Sweep time: 4 ms for 401 points
- Temperature stability: typ. 0.01 dB/°C
Keysight E8361C PNA Microwave Network Analyzer
- 10 MHz to 67 GHz frequency range
- 94 dB dynamic range and <0.006 dB trace noise (specified to 67 GHz, with operation to 70 GHz)
- <26 usec/point measurement speed, 32 channels, 20,001 points
Anritsu MS2026A Vector Network Analyzer
- Frequency Range: 2 to 6000 MHz
- Frequency Accuracy: 25 ppm
- Frequency Resolution: 10 kHz
Keysight E5071C ENA Vector Network Analyzer
- 9 kHz – 8.5 GHz
- Up to 123 dB
- 2 or 4 ports
Keysight N9951A FieldFox Handheld Microwave Analyzer
- Frequency Range: 300 kHz – 44 GHz
- Dynamic Range: Up to 110 dB
- 2 Ports
Tektronix TTR506 Vector Network Analyzer
- Frequency range: 100 kHz – 6 GHz
- Dynamic range: Up to 122 dB
- 2 ports
Keysight N5225B PNA Microwave Network Analyzer
- Frequency Range | 900 Hz-50 GHz
- Dynamic Range | 127 dB
- Harmonics | -60 dBc
Keysight E8362C PNA Network Analyzer VNA 10 MHz to 20 GHz
- Amplifier gain compression, harmonic, IMD, and pulsed-RF
- Mixer conversion loss, return loss, isolation, and absolute group delay
- <26 usec/point measurement speed, 32 channels, 20,001 points
Keysight 8722ES Vector Network Analyzer
- 50 MHz – 40 GHz
- Up to 110 dB
- 2 Ports
OMICRON Bode 100 Vector Network Analyzer 1 Hz - 40 MHz
- Swept S-parameters in the 50 system
- Reflection coefficient and return loss
- Insertion loss of filters
Keysight E5063A ENA Series Network Analyzer | 100 kHz -18 GHz
- 100 kHz to 18 GHz
- 2-port 50 ohm S-parameter test set
- Fixture simulator
Keysight N9928A FieldFox Handheld Microwave Vector Network Analyzer, 26.5 GHz
- Configure as a full, two-port VNA, time-domain reflectometer, vector voltmeter, cable and antenna analyzer, and more
- Measure all four S-parameters simultaneously with a single connection and up to 95 dB of dynamic range
- Perform accurate testing with QuickCal, full two-port unknown thru Cal, and Thru, Reflect, Line (TRL) calibration in the field
Keysight 85056A Standard Mechanical Calibration Kit 50 GHz
- DC to 50 GHz frequency range
- Calibration standards to perform full two-port calibration
- Torque wrenches for properly connecting standards
Keysight N4693A Electronic Calibration Module
- 10 MHz to 50 GHz frequency range
- USB interface for direct control with PNA and ENA series of network analyzers
- Fast calibration
Keysight FieldFox N9923A Network Analyzer (Agilent N9923A)
- Built-in QuickCal technology enables calibration without a cal kit
- Best measurement stability over time and temperature
- Industry´s only handheld network analyzer with MIL PRF 28800F Class 2 compliance with no exceptions
Keysight 85052B Standard Mechanical Calibration Kit
- DC to 26.5 GHz frequency range
- Calibration standards to perform full two-port calibration
- Torque wrenches for properly connecting standards
Keysight 85052D Economy Mechanical Calibration Kit
- DC to 26.5 GHz frequency range
- Calibration standards to perform full two-port calibration
- Torque wrenches for properly connecting standards
Keysight N5262AC15 Banded Millimeter Wave Calibration Kit
- Banded Millimeter Wave Calibration Kit
- Part of Keysight's series of wave network analysis solutions
- A frequency range of 50 to 75 GHz
Keysight N5262AC12 Banded Millimeter Wave Calibration Kit
- Part of Keysight's series of N5262A wave network analysis solutions
- Virginia Diodes Inc. calibration kit
- A frequency of 60 to 90 GHz
Maury Microwave 8650CK10 Calibration Kit
Keysight 85039B Calibration Kit, DC - 3 GHz, Type- F
- DC to 3 GHz frequency range
- Impedance 75ohms
- Storage temperature 40 to +75°C
Keysight 85131F Flexible Cable Set, 3.5 mm
Keysight 85093C RF Electronic Calibration (ECal) Module | 3.5mm
- 300 kHz to 9 GHz frequency range
- Fast full two-port calibration with a single connection
- Simple non-insertable device calibration
Anritsu 15N43F50-1.5C Cable Assembly
- Phase and amplitude stable with flexure: longer calibration intervals, greater precision and accuracy
- Flexible: user friendly/easy to route
- Internally ruggedized: crush, torque and kink resistant