Additel 762 Automated Hydraulic Pressure Calibrator
- Automated pressure generation and control to 10,000 psi (700 Bar)
- Accuracy to 0.01%FS
- Dual-range calibration
Fluke 6270A Pressure Controller/Calibrator
- Calibrate a wide range of gauges and sensors with a single instrument
- Modular configuration makes this a versatile and economical solution
- Easy to operate
Keysight N4693A Electronic Calibration Module
- 10 MHz to 50 GHz frequency range
- USB interface for direct control with PNA and ENA series of network analyzers
- Fast calibration
Keysight 85056A Standard Mechanical Calibration Kit 50 GHz
- DC to 50 GHz frequency range
- Calibration standards to perform full two-port calibration
- Torque wrenches for properly connecting standards
Keysight 85052B Standard Mechanical Calibration Kit
- DC to 26.5 GHz frequency range
- Calibration standards to perform full two-port calibration
- Torque wrenches for properly connecting standards
Keysight N5262AC15 Banded Millimeter Wave Calibration Kit
- Banded Millimeter Wave Calibration Kit
- Part of Keysight's series of wave network analysis solutions
- A frequency range of 50 to 75 GHz
Keysight N5262AC12 Banded Millimeter Wave Calibration Kit
- Part of Keysight's series of N5262A wave network analysis solutions
- Virginia Diodes Inc. calibration kit
- A frequency of 60 to 90 GHz
Maury Microwave 8650CK10 Calibration Kit
Keysight 85131F Flexible Cable Set, 3.5 mm
Crystal XP2i Series Pressure Gauge
- Specified in percent of reading like deadweight testers
- Easy to read display, day or night
- 5 full digits, great for leak testing
Keysight 85093C RF Electronic Calibration (ECal) Module | 3.5mm
- 300 kHz to 9 GHz frequency range
- Fast full two-port calibration with a single connection
- Simple non-insertable device calibration
Keysight 85051B Verification Kit, 7 mm
- 20 dB attenuator
- 50 dB attenuator
- 25Ω mismatch airline
Keysight 85033E Calibration Kit, DC - 9 GHz, 3.5 mm
Keysight 85032F Calibration Kit, DC - 9 GHz, Type- N
Keysight 85032B Calibration Kit, Type-N, 50 ohms
Keysight 85033A SMA Calibration Kit
- DC to 9 GHz frequency range
- Connector type to DUT is 7mm
Druck DPI610E Pressure Calibrator Series
- 100,000 point data logging memory
- HART communication as standard on all versions
- Integral calibration record with calibration due countdown
Fluke 3130 Portable Pneumatic Pressure Calibrator
- Measure and generate pressures from vacuum to 2 MPa (300 psi, 20 bar)
- Internal pump can generate vacuum to -80 kPa (-12 psi, -0.8 bar) or pressure to 2 MPa (300 psi, 20 bar)
- Supply pressure connection allowing the use of external gas supply up to 2 MPa (300 psi, 20 bar)
Druck DPI 611-07G Hand-held Pressure Calibrator
- 50% smaller and 33% lighter than the DPI 610
- Creates 95% vacuum
- Pressure measurement is twice as accurate
Keysight N4433A Electronic Calibration Module 300 kHz - 20 GHz
- 300 kHz to 20 GHz frequency range
- Standard 3.5 mm (f) connectors
- Fast full 3- or 4-port calibration with a single connection
Additel 222A Multifunction Process Calibrator
- Sourcing, simulating and measuring pressure, temperature, and electrical signals
- Smartphone-like menu and interface make the operation simpler and easier
- The internal cold junction compensation sensor can be re-calibrated at ice point by users
Keysight 85031B 7mm Calibration Kit
Keysight 85039B Calibration Kit, DC - 3 GHz, Type- F
- DC to 3 GHz frequency range
- Impedance 75ohms
- Storage temperature 40 to +75°C
Druck DPI 802 Pressure Calibrator
- Single or dual range configuration
- IDOS pressure sensors provide accuracies to 0.05% FS all-inclusive or 0.01% precision
- mA measure, switch test and 24V loop power
Keysight 11570A, 50 OHM Accessory Kit