Keysight 85130D Test Port Adapter Set, 3.5 mm (Test Port) Rentals

Keysight 85130D Test Port Adapter Set, 3.5 mm (Test Port)

The Keysight 85130D test port adapter is designed to protect the test set port when it would be directly connected to the device under test. These adapters have a special rugged female connector designed for connecting to the network analyzer test port. This special connector will not mate with a standard male connector, but converts the rugged test set port to a connection that can be mated with the device under test. The set contains a 3.5 mm to PSC-3.5 mm male adapter and a 3.5 mm to PSC-3.5 mm female adapter. The frequency range for these adapters is DC to 26.5 GHz with a return loss of 28 dB or better.

Keysight N4693A Electronic Calibration Module

10 MHz to 50 GHz frequency range
USB interface for direct control with PNA and ENA series of network analyzers
Fast calibration

Top view of the Keysight N4433A Ecal module

Keysight N4433A Electronic Calibration Module

Frequency Range: 300 KHz - 20 GHz
Standard 3.5 mm (f) connectors
PNA, ENA, VNA compatibility

Keysight 85056A Standard Mechanical Calibration Kit 50 GHz

DC to 50 GHz frequency range
Calibration standards to perform full two-port calibration
Torque wrenches for properly connecting standards

Keysight 85052B Standard Mechanical Calibration Kit

DC to 26.5 GHz frequency range
Calibration standards to perform full two-port calibration
Torque wrenches for properly connecting standards

Keysight N5262AC15 Banded Millimeter Wave Calibration Kit

Banded Millimeter Wave Calibration Kit
Part of Keysight's series of wave network analysis solutions
A frequency range of 50 to 75 GHz

Keysight N5262AC12 Banded Millimeter Wave Calibration Kit

Part of Keysight's series of N5262A wave network analysis solutions
Virginia Diodes Inc. calibration kit
A frequency of 60 to 90 GHz

Maury Microwave 8650CK10 Calibration Kit

Keysight 85054D Mechanical Calibration Kit, DC - 18 GHz

DC to 18 GHz frequency range
Torque wrenches for properly connecting standards
Calibration standards to perform full two-port calibration

Keysight 85093C RF Electronic Calibration (ECal) Module | 3.5mm

300 kHz to 9 GHz frequency range
Fast full two-port calibration with a single connection
Simple non-insertable device calibration

Keysight 85051B Verification Kit, 7 mm

20 dB attenuator
50 dB attenuator
25Ω mismatch airline

Anritsu 15N43F50-1.5C Cable Assembly

Phase and amplitude stable with flexure: longer calibration intervals, greater precision and accuracy
Flexible: user friendly/easy to route
Internally ruggedized: crush, torque and kink resistant