Additel 762 Automated Hydraulic Pressure Calibrator
- Automated pressure generation and control to 10,000 psi (700 Bar)
- Accuracy to 0.01%FS
- Dual-range calibration
Fluke 6270A Pressure Controller/Calibrator
- Calibrate a wide range of gauges and sensors with a single instrument
- Modular configuration makes this a versatile and economical solution
- Easy to operate
Keysight N4693A Electronic Calibration Module
- 10 MHz to 50 GHz frequency range
- USB interface for direct control with PNA and ENA series of network analyzers
- Fast calibration
Keysight 85056A Standard Mechanical Calibration Kit 50 GHz
- DC to 50 GHz frequency range
- Calibration standards to perform full two-port calibration
- Torque wrenches for properly connecting standards
Keysight 85052B Standard Mechanical Calibration Kit
- DC to 26.5 GHz frequency range
- Calibration standards to perform full two-port calibration
- Torque wrenches for properly connecting standards
Keysight N5262AC12 Banded Millimeter Wave Calibration Kit
- Part of Keysight's series of N5262A wave network analysis solutions
- Virginia Diodes Inc. calibration kit
- A frequency of 60 to 90 GHz
Keysight N5262AC15 Banded Millimeter Wave Calibration Kit
- Banded Millimeter Wave Calibration Kit
- Part of Keysight's series of wave network analysis solutions
- A frequency range of 50 to 75 GHz
Maury Microwave 8650CK10 Calibration Kit
Keysight 85131F Flexible Cable Set, 3.5 mm
Crystal XP2i Series Pressure Gauge
- Specified in percent of reading like deadweight testers
- Easy to read display, day or night
- 5 full digits, great for leak testing
Keysight 85093C RF Electronic Calibration (ECal) Module | 3.5mm
- 300 kHz to 9 GHz frequency range
- Fast full two-port calibration with a single connection
- Simple non-insertable device calibration
Keysight 85051B Verification Kit, 7 mm
- 20 dB attenuator
- 50 dB attenuator
- 25Ω mismatch airline
Keysight 85033E Calibration Kit, DC - 9 GHz, 3.5 mm
Keysight 85032F Calibration Kit, DC - 9 GHz, Type- N
Keysight 85032B Calibration Kit, Type-N, 50 ohms
Keysight 85033A SMA Calibration Kit
- DC to 9 GHz frequency range
- Connector type to DUT is 7mm
Keysight 85054B Mechanical Calibration Kit, DC - 18 GHz
- DC to 18 GHz frequency range
- Standard definitions on disk for loading into network analyzer
- Adapters to change the sex of the test port
Fluke 7250LP Low Pressure Calibrator
- 10 inH2O and 30 inH2O
- 20 inH2O and 60 inH2O
- 35 inH2O and 100 inH2O
Additel 123 Pressure Calibrator
- Additel 123 used for hydraulic pressure applications up to 15,000 psi (1,000 bar)
- Filter is built into the manifold
- Four hand-tight Quick Connectors
Additel 227 HART Communication Process Calibrator
- Easy-to-use cellphone-like interface
- High accuracy
- Thermocouple measurement performance
Keysight 85039A Calibration Kit, DC - 3 GHz, Type- F
Druck DPI 800 Pressure Indicator
- Ranges from 10 in H2O to 10,000 psi (25 mbar to 700 bar)
- Single or dual range configuration
- IDOS pressure sensors provide accuracies to 0.05% FS all-inclusive or 0.01% precision
Fluke 719Pro 300G Electric Pressure Calibrator
- 300 psi pressure ranges
- Pressure measurement from internal or external sensor
- Sourced/simulated or measured mA values
Additel 780 Pressure Calibrator
- Pressure ranges up to 1,000 psi or 3,000 psi (depending on model)
- Removable interchangeable intelligent sensors
- Precision accuracy models to 0.01% of reading
Fluke 2271A Industrial Pressure Calibrator
- Calibrate a wide range of gauges and sensors with a single instrument
- Two levels of accuracy, 0.01% reading or 0.02% FS
- Wide measurement range from -100 kPa to 20 MPa (-15 to 3000 psi)