Vibration Research VR1016 16 Channel Vibration Analyzer
- 16 simultaneous channels
- 128kHz sample rate
- IEEE 1451.4 TEDS class 1
Pruftechnik VIBXPERT II Vibration Analyzer
- Portable all-in-one system for effective vibration monitoring
- Operational balancing (one and two plane field balancing)
- Maximum reliability of vibration data
Vibration Research VR1000 Vibration Analyzer Series
- RecorderVIEW software records field acceleration measurements directly to the hard drive
- Transient Capture software for waveforms post processing.
- Analyzer software (Cross spectrum, Transfer function, and coherence)
Crystal Instruments CoCo-80 Handheld Signal Analyzer
- Multiple input channels
- High sampling rate
- Portable design
Fluke 810 Vibration Tester for DC Motors
- On-board diagnosis and location of the four most common standard mechanical faults: bearings, looseness, misalignment, unbalance and other (nonstandard faults)
- Fault severity scale with four severity levels: Slight, Moderate, Serious, and Extreme
- Prioritized repair recommendations
Fluke 805 FC Vibration Meter
- Innovative sensor design minimizes measurement variations caused by device angle or contact pressure
- Consistent data quality at both low and high frequency ranges
- Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
Bently Nevada Commtest VB7 Dual Channel Vibration Analyzer
- Route enabled - Build routes in Ascent® and send these to your instrument
- CBDb - Commtest Bearing Database with over 30,000 bearings
- Waveform analysis tools - Perfect for power users
PCB Piezotronics 378B02 Free-Field Microphone
- Sensitivity: 50 mV/Pa (± 1.5 dB)
- Frequency: 3.75 Hz – 20 kHz (± 2 dB)
- Dynamic range: 15.5 dB(A) – 146 dB
Vibration Research VR1004 4 Channel Vibration Analyzer
- 4 simultaneous channels
- 128kHz sample rate
- IEEE 1451.4 TEDS class 1
Adash A4300 VA3 Pro Vibration Analyzer
- Ideal for route measurement.
- Long lasting battery.
- Low weight 780 g.
Pruftechnik VIBXPERT III Balancer
- Well balanced machines have reduced risk of resonance vibration
- Intuitive and interactive interface
- Simplified, easy-to-use touch screen user interface
Crystal Instruments Spider-80X Vibration Controller System
- High dynamic range
- Vibration test control (operation mode)
- Compatible with desktop and iPad app versions of EDM (Engineering Data Management) software
Schenck VIBROPORT 80 Vibration Analyzer
- Portable vibration analyzer with up to 4 input channels for vibration + speed (triaxial measurements possible)
- Modules for FFT, balancing, tracking, acceptance testing, etc.
- Easy handling and big color display
Bruel & Kjaer 2270 Sound Level Meter and Vibration Analyzer
- Dual-channel measurement instrument
- Large, high-resolution touchscreen
- High-capacity plug-in memory card data storage
Bently Nevada SCOUT140EX Vibration Data Analyzer
- Dual-channel measurements: 6400
- 4-channel measurements: 3200
- 25 Hz to 80 kHz
Crystal Instruments Spider-20 and Spider-20E Signal Analyzer & Data Recorder
- Frequency Response Function (FRF)
- Octave Analysis and Sound Level Meters (SLM)
- Time Waveform Recording
IRD Model 258B Series II Vibration Analyzer & Balance Kit
- Single, dual, or tri spectrum display with phase vector provides a simplified, yet full interpretation of vibration data
- 0.16 Hz to 40 kHz, 100 – 25,600 lines of resolution and CPM unit display option
- Tri-axial measurement support
Crystal Instruments CoCo-80X Vibration Data Collector
- 2-8 inputs with IEPE
- Full speed recording
- Battery-powered (portable)
_53.jpg)
Bently Nevada SCOUT240-IS Vibration Analyzer
- Portable vibration data collector, 4-channel
- Includes industrial phone with S1 Collector app
- Phone is rated ATEX Zone 1 / Zone 21 and CSA Class 1 Zone 1
Emerson CSI 2140 Machinery Health Analyzer
- 24-bit precision
- 10 Hz - 80 kHz frequency range
- Portable, lightweight, thinner model
Bently Nevada Commtest VB8 | Four Channel Vibration Analysis System
- Fully automated measurement parameter and alarm setups based on The Proven Method from Technical Associates
- ISO 2372 and 10816 standards
- 4 channel simultaneous recordings
Bently Nevada COMMTEST240 Vibration Analyzer
- Portable vibration data collector, 4-channel
- Comes with industrial smartphone & works in tandem with S1 Collector app
- Caters to non-hazardous environments
Vibralign Fixturlaser SMC Balancing Kit
- Laser tachometer with cable for connection on channel C, supplied with a 5m extension cable
- USB cable for connecting the Fixturlaser SMC to a computer (reports)
- Magnet holder
Bently Nevada COMMTEST220 Vibration Analyzer
- Portable vibration data collector, 2-channel
- Comes with industrial smartphone & works in tandem with S1 Collector app
- Caters to non-hazardous environments
_52.jpg)
Bently Nevada SCOUT220-IS Vibration Analyzer
- Portable vibration data collector, 2-channel
- Includes industrial phone with S1 Collector app
- Phone is rated ATEX Zone 1 / Zone 21 and CSA Class 1 Zone 1