Pruftechnik VIBXPERT II Vibration Analyzer
- Portable all-in-one system for effective vibration monitoring
- Operational balancing (one and two plane field balancing)
- Maximum reliability of vibration data
Vibration Research VR1016 16 Channel Vibration Analyzer
- 16 simultaneous channels
- 128kHz sample rate
- IEEE 1451.4 TEDS class 1
Crystal Instruments CoCo-80 Handheld Signal Analyzer
- Multiple input channels
- High sampling rate
- Portable design
Vibration Research VR1000 Vibration Analyzer Series
- RecorderVIEW software records field acceleration measurements directly to the hard drive
- Transient Capture software for waveforms post processing.
- Analyzer software (Cross spectrum, Transfer function, and coherence)
Fluke 810 Vibration Tester for DC Motors
- On-board diagnosis and location of the four most common standard mechanical faults: bearings, looseness, misalignment, unbalance and other (nonstandard faults)
- Fault severity scale with four severity levels: Slight, Moderate, Serious, and Extreme
- Prioritized repair recommendations
Acoem Wireless Balancer
- Frequency: 1 Hz – 7.5 kHz
- Angular Precision: 0.5° at 3000 RPM
- Speed Range Up to 6000 RPM
Vibration Research VR1004 4 Channel Vibration Analyzer
- 4 simultaneous channels
- 128kHz sample rate
- IEEE 1451.4 TEDS class 1
Pruftechnik VIBXPERT III Balancer
- Well balanced machines have reduced risk of resonance vibration
- Intuitive and interactive interface
- Simplified, easy-to-use touch screen user interface
Schenck VIBROTEST 80 Vibration Analyzer
- Portable vibration analyzer with up to 4 input channels for vibration + speed (triaxial measurements possible)
- Modules for FFT, balancing, tracking, acceptance testing, etc.
- Easy handling and big color display
Schenck VIBROPORT 80 Vibration Analyzer
- Portable vibration analyzer with up to 4 input channels for vibration + speed (triaxial measurements possible)
- Modules for FFT, balancing, tracking, acceptance testing, etc.
- Easy handling and big color display
Bently Nevada Commtest VB8 | Four Channel Vibration Analysis System
- Fully automated measurement parameter and alarm setups based on The Proven Method from Technical Associates
- ISO 2372 and 10816 standards
- 4 channel simultaneous recordings
Bently Nevada Commtest VB7 Dual Channel Vibration Analyzer
- AC coupled range: 16V peak-peak
- DC coupled ranges: 0 - 20V, -10... 10V, -20... 0V
- Dynamic Range: ≥95dB
Rion VA-12 Vibration Analyzer
- Vibration meter mode: Allows simultaneous measurement of acceleration, velocity, displacement, and acceleration crest factor.
- FFT analyzer mode: Real-time analysis frequency 20 kHz, 3 200 spectral lines and available Envelope processing.
- Waveform data storing on SD card for post process/analysis.
Crystal Instruments Spider-80X Vibration Controller System
- High dynamic range
- Vibration test control (operation mode)
- Compatible with desktop and iPad app versions of EDM (Engineering Data Management) software
Crystal Instruments Spider-20 and Spider-20E Signal Analyzer & Data Recorder
- Frequency Response Function (FRF)
- Octave Analysis and Sound Level Meters (SLM)
- Time Waveform Recording
Vibralign Fixturlaser SMC Balancing Kit
- Laser tachometer with cable for connection on channel C, supplied with a 5m extension cable
- USB cable for connecting the Fixturlaser SMC to a computer (reports)
- Magnet holder
_53.jpg)
Bently Nevada SCOUT240-IS Vibration Analyzer
- Portable vibration data collector, 4-channel
- Includes industrial phone with S1 Collector app
- Phone is rated ATEX Zone 1 / Zone 21 and CSA Class 1 Zone 1
_52.jpg)
Bently Nevada SCOUT220-IS Vibration Analyzer
- Portable vibration data collector, 2-channel
- Includes industrial phone with S1 Collector app
- Phone is rated ATEX Zone 1 / Zone 21 and CSA Class 1 Zone 1
Bently Nevada SCOUT140EX Vibration Data Analyzer
- Dual-channel measurements: 6400
- 4-channel measurements: 3200
- 25 Hz to 80 kHz
RION RIONOTE Portable Multi-Function Measuring System
- Color LCD touch screen allows intuitive operation.
- B5 size ideal for measurements in the field. Light weight: only 1.2 kg including amplifier and battery.
- Removable lithium-ion battery can be exchanged in the field.
Vibralign OneProd Falcon Vibration Analyzer
- Wireless vibration analysis
- Graphical, touch screen interface
- Three-axis wireless sensor
Vibralign Fixturlaser SMC Smart Machine Checker
- Accessible touchscreen interface
- Machinery Diagnostics via Accurex™ technology
- Camera, strobe light and pyrometer built in
Emerson CSI 2140 Machinery Health Analyzer
- 24-bit precision
- 10 Hz - 80 kHz frequency range
- Portable, lightweight, thinner model
Bently Nevada COMMTEST240 Vibration Analyzer
- Portable vibration data collector, 4-channel
- Comes with industrial smartphone & works in tandem with S1 Collector app
- Caters to non-hazardous environments
Bently Nevada COMMTEST220 Vibration Analyzer
- Portable vibration data collector, 2-channel
- Comes with industrial smartphone & works in tandem with S1 Collector app
- Caters to non-hazardous environments