Eucol U9845 Impulse Winding Tester

Quote Add-Ons

Tech Support
(800) 404-2832

With Every
Rental

Worldwide
Delivery

Larger

Categories

Motor Analyzers

The Eucol U9845 Impulse Winding Tester is a versatile winding testing device with a pulse voltage of 100V~5000V at 10V steps, 5%±10V. Eucol U9845 test systems utilize switching components controlled by high stability, high-voltage impact power and thyristor modules. This configuration dramatically increases stability, reliability and measurement precision during testing. The Eucol U9845 can be operated over four high-voltage channels and through one of four waveform comparison methods: area, differential area, corona and differential phase. Eucol U9845 impulse winding testers possess an advanced 32 bit CPU and a memory depth of 6500 bytes.

Specifications
Features
Applications
Options
Accessories
Standards
Videos

Features

Four channel testing
Dispense with standard waveform acquisition via two-channel comparison test
65k color 7" TFT high definition display screen
Strong corona analysis and extraction function for defective insulation excavation
Directly save the screen pictures (BMP, GIF, PNG) or waveform data to U-disk through SAVE key

Specifications

Channel number of HV	4
Impulse voltage	100V~5000V， 10V step，5%±10V
Inductance test range	≥20uH
Impulse energy	Max.: 0.25 Joule
Test speed	Single-winding: Max. 12 meas/sec, 4-winding: Max. 2 meas/sec
Applied pulses	Max. 32 of test pulse; max.8 of demagnetizing pulse
Input impedance	10M
Display	800x480 dot 65k color TFT, waveform display range: 650x256, supports 1.5 times magnifying display
Waveform acquisition	Sampling rate: max. 100Msps, adjustable 10 levels; resolution: 8 Bits ; memory depth: 6500 bytes; Sample average: 1-32
Comparison methods	Area, differential area, corona and differential phase
Test repeated accuracy	±1%
Comparison test	yes
Waveform measurement	Voltage/frequency/time of the waveform
Trigger Mode	Manual (including foot switch)/External/Internal/Bus
Detection Output	OK/NG display, LED / alarm
Test statistics	Statistics function of measurement time and results, up to 20000 pieces
Internal Memory	120 groups
U-disk Memory	600 groups (standard waveform data and test setup parameters)
HANDLER signal	START, STOP, PASS, FAIL, BUSY, EOC
Interface	USB Slave, RS232C, IEEE488（option); USB Host（support storage of BMP, GIF, PNG image files and firmware upgrade）
Power supply	220V±10% 50Hz±5%
Power consumption	≤50VA
Weight	8.0Kg
Dimensions (WxHxD)	400mm x 132mm x 350mm
Temperature	0℃ - 40℃
Humidity	≤75% R.H.