Electrom Instruments iTIG III Static Motor Tester & Winding Analyzer
- High frequency surge test - finds more faults
- Partial discharge test - no accessories required
- Highly accurate leakage current measurement
Electrom Instruments iTIG II 15kV Motor Tester and Winding Analyzer with Optional Partial Discharge
- Superior High Frequency 50/60Hz Surge Pulses.
- Automatic Quick Surge and Surge Guard.
- Compare Coils to Master Coil.
PdMA M5552 Electric Motor Analyzer
- Six channel inrush for improved trouble shooting and analysis
- 400% increase in battery capacity for extended testing
- Heads up LED lighting for improved safety while testing
Electrom Instruments ITIG-III-D15HPD-CLZ Motor Tester and Winding Analyzer
- Fully automatic testing capability
- IR, DC Hipot, Surge, and Partial Discharge Tests
- Maximum output voltage of 15 kV
Baker AWA-IV/4 Surge & DC HiPot Tester
- Output voltage: 0 - 4,250V
- Max output current: 450A
- Pulse energy: 0.9J
Electrom Instruments PP-II Power Pack
- Electrom Instruments’ unique voltage generation and control technology has not only enabled us to make the lightest weight 30kV 45J Power Pack on the market, but also to make the Surge and
- PP-II instruments are built for both shop and field testing with a rugged case, the same size as the iTIG II.
- The package of features in the PP-II and iTIG II make this high voltage tester very easy to use. Tests can be automatic. Users can set up test profiles and parameters in advance or use default
Magtrol HD-710 Hysteresis Dynamometer
- Hysteresis braking system provides precise torque loading independent of shaft speed
- Motor testing: from no load to locked rotor
- Standard torque units SI (English & Metric available upon request)
Baker EXP4000 SKF Dynamic Motor Analyzer
Fluke MDA-510 and MDA-550
- Measure key motor-drive parameters including voltage, current, DC Bus voltage level and AC ripple, voltage and current unbalance and harmonics (MDA-550), voltage modulation, and motor shaft voltage
- Conduct guided measurements for motor-drive input, DC bus, drive output, motor input and shaft measurements (MDA-550) with graphical step-by-step voltage and current connection diagrams
- Use simplified measurement setup with preset measurement profiles to automatically trigger data collection based on the chosen test procedure
Eucol U9845 Impulse Winding Tester
- Four channel testing
- Dispense with standard waveform acquisition via two-channel comparison test
- 65k color 7" TFT high definition display screen
Megger Baker AWA IV-4 Static Motor Analyzer | 4 kV
- Megohm, PI, DA, DC step-voltage, DC hipot test capabilities
- USB ports for data transfer and printing with Windows plug-and-play printers
- Wireless networking capability
PdMA M3502 MCE 5kV AC/DC Offline Electric Motor Analyzer
- Portable and battery powered
- Variable test voltage from 250 to 5000V
- Automatic IR, PI, DAR, and Step Voltage Tests
Magtrol HD-515 Hysteresis Dynamometer
- Hysteresis braking system provides precise torque loading independent of shaft speed
- Motor testing: from no load to locked rotor
- Standard torque units SI (English & Metric available upon request)
Megger ADX Automated Static Motor Analyzer
- High-definition graphical user interface displays surge test waveforms
- Displays DC HiPot results
- Displays hundreds of coil waveforms for quick analysis
Magtrol HD-800 Hysteresis Dynamometer
- Hysteresis Braking System
- Motor Testing: from no load to locked rotor
- Standard Torque Units: English, Metric & SI available
SKF Static Motor Analyzer Baker DX6 HO
- 4 to 40 kV voltage testing capability to test fractional HP motors to 40 megawatt generators
- High and low voltage testing capability in one unit to test the motor circuit and all the insulation
- Intuitive graphical user interface with touch screen
SKF Static Motor Analyzer Baker DX12
- 4 to 40 kV voltage testing capability to test fractional HP motors to 40 megawatt generators
- High and low voltage testing capability in one unit to test the motor circuit and all the insulation
- Intuitive graphical user interface with touch screen
Magtrol HD-715 Hysteresis Dynamometer
- Hysteresis braking system provides precise torque loading independent of shaft speed
- Motor testing: from no load to locked rotor
- Standard torque units SI (English & Metric available upon request)
Electrom Instruments iTIG III D12HPD-CLZ Static Motor Tester
- Fully automatic testing capability
- IR, DC Hipot, Surge, and Partial Discharge Tests
- Maximum output voltage of 12 kV
Baker AWA-IV Static Motor Analyzer
- AWAIV-12HO– High Output Unit for heavy duty testing (low turn-count windings). Call for more specifics.
- Universal power supply: 85 V AC – 265 V AC
- Surge test (all units) IEEE522 compliant
PdMA M4050 Emax 5kV AC/DC Online Electric Motor Analyzer
- Portable and battery powered
- Low, medium, and high voltage motors compatible
- Six channel simultaneous acquisition
Baker AWA IV-12, 12kV Surge & DC HiPot Tester
SKF Static Motor Analyzer Baker DX6
- 4 to 40 kV voltage testing capability to test fractional HP motors to 40 megawatt generators
- High and low voltage testing capability in one unit to test the motor circuit and all the insulation
- Intuitive graphical user interface with touch screen
SKF Static Motor Analyzers Baker DX
- 4 to 40 kV voltage testing capability to test fractional HP motors to 40 megawatt generators
- High and low voltage testing capability in one unit to test the motor circuit and all the insulation
- Intuitive graphical user interface with touch screen
SKF Static Motor Analyzer Baker DX12 HO
- 4 to 40 kV voltage testing capability to test fractional HP motors to 40 megawatt generators
- High and low voltage testing capability in one unit to test the motor circuit and all the insulation
- Intuitive graphical user interface with touch screen