Fluke 726 Precision Multifunction Process Calibrator

The Fluke 726 Precision Multifunction Process Calibrator is designed specifically for the Process industry with broad workload coverage, calibration power and unsurpassed accuracy in mind. The 726 measures and sources almost all process parameters and can calibrate almost anything. The 726 will also interpret results without the help of a calculator and store measurement data for later analysis.

Product Info Related Products

Dimensions	200 x 96 x 47 mm (7.9 x 3.8 x 1.9 in)
Weight	650 g (23 oz)
Ramp functions	Source functions: voltage, current, resistance, frequency, temperature Ramps: slow ramp, fast ramp, 25% step-ramp
Loop power function	Voltage: 24 V Accuracy: 10% Maximum current: 22 mA, short circuit protected
Resistance	0.0 to 4000.0Ω ± 0.015%
Frequency (measurement accuracy)	2.0 to 1000.0 CPM 1.0 to 1000.0 Hz 1.00 to 15.0 kHz
Operating temperature	-10°C to +55°C (+14°F to +131°F)
Storage temperature	-20°C to +71°C (-4°F to +159.8°F)
Operating altitude	3000 m
Batteries	4 AA alkaline batteries
Side port connections	Pressure module connector, also used for remote real-time programming
Safety	EN 61010-1:1993 ANSI/ISA S82.01-1994 CAN/CSA C22.2 No 1010.1:1992

More precise measurement and calibration source performance, accuracies of 0.01%.
Two separate channels; measure, source and view process signals simultaneously
Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
Measure or source pressure using any of 29 Fluke 700Pxx Pressure Modules
Source mA with simultaneous pressure measurement to conduct valve and I/P tests
Integrated pressure switch test allows you to capture the set, reset and deadband of a switch

SKU: FLUK-726

Emerson TREXLFPKLWS3S AMS Trex Device Communicator

Eliminate the need for specialized tools with power the loop functionality
Quickly resolve field devices issues with advanced diagnostics
Configure and test valves inline

Fluke 754 Documenting Process Calibrator-HART

Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters, and other instruments
Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
Power transmitters during test using loop supply with simultaneous mA measurement

Fluke 725 Multifunction Process Calibrator

Small and streamlined shape makes it easy to carry
Rugged, reliable design stands up to field use
Easy to read measure/source screen lets you view input and output simultaneously

Fluke 787 Process Meter

DMM and a loop calibrator in one rugged, handheld tool
Provides a precision 1000 V, 440 mA True-RMS digital multimeter designed to meet 1000 volt IEC 1010 CAT III standards
Features a clear LCD with backlight; 4,000 counts (30,000 counts for DC current)

PIE Calibration 334 Loop Calibrator

4 - 20 mA loop calibrator
Accurate to ±0.025% of Span at 4.00 & 20.00 EZ-CHECK outputs
Separate compartment for no-tool battery changes with four inexpensive “AA” batteries

Additel 222A Multifunction Process Calibrator

Sourcing, simulating and measuring pressure, temperature, and electrical signals
Smartphone-like menu and interface make the operation simpler and easier
The internal cold junction compensation sensor can be re-calibrated at ice point by users

PCE Instruments PCE-789 Multifunction Calibrator

Different signals simulation and measurement
Integrated function generator
Graphic display with backlight

PIE Calibration 830 Diagnostic Process Calibrator

Detect hidden loop problems with Patented Current leak detection technology
Check all loop parameters at once with the LoopScope
Automatically detect 2, 3, or 4 wire RTDs

AMETEK ASC-400 Multifunction Calibrator

Large full color display
Advanced Simplicity user interface
Connection Assistant provides connection details for the current set-up

Fluke 743B Documenting Process Calibrator

Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters, and other instruments
Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
Power transmitters during test using loop supply with simultaneous mA measurement

Beamex MC6 Field Process Calibrator

Multi-functional field process calibrator and communicator in one device
Fully paperless calibration process
Unmatched accuracy

Additel 226 Multifunction Process Calibrator

True RMS voltage meter capability
Dual channel pressure module ports
High static differential pressure measurement 0.002% FS

PIE Calibration 820Elite Multifunction Diagnostic Calibrator

Multifunction diagnostic process calibrator: mA, V, TC, ohms, RTD, Hz, pH, pressure
Simulate pH probes into transmitters & analyzers
Quickly diagnose ground fault and current leakage with patented loop diagnostic technology

Additel 223A Multifunction Process Calibrator

Sourcing, simulating and measuring pressure, temperature, and electrical signals
Smartphone-like menu and interface make the operation simpler
Hart Communication capability

Yokogawa CA71 Handy CAL Calibrator

Operating temperature range: 0°C to 50°C (32°F to 122°F)
Operating Humidity Range: 20 to 80% RH
Source Unit Voltage Limiter ~32 V

Beamex MC5 Multifunction Fieldbus Calibrator

Modular design allows configuration based on your needs
Capabilities for pressure, temperature, electrical and frequency signals calibration
Internal and/or external pressure modules