Teledyne API T640 PM Mass Monitor

Quote Add-Ons

Tech Support
(800) 404-2832

With Every
Rental

Worldwide
Delivery

Larger

Categories

Documents

Datasheet

The Teledyne API T640 PM Mass Monitor is the next breakthrough in ambient particulate monitors. Teledyne API T640 instruments deliver 1-min or better time resolution with exceptional sensitivity and precision. The instrument is very low maintenance and requires no sample media for minimal cost of operation. The Teledyne API T640 with 640X option is a real-time, continuous particulate matter (PM) mass monitor that uses scattered light spectrometry for measurement. The T640 measures 2.5 PM, and the 640X option measures 2.5, 10, and coarse PM.

All T Series instruments offer an advanced color display, capacitive touch screen, intuitive user interface, flexible I/O, and built-in data acquisition capability. All instrument set up, control and access to stored data and diagnostic information is available through the front panel, or via RS232, Ethernet, or USB com ports either locally or by remote connection. The T640 comes with NumaView software. NumaView Remote PC software allows for a remote connection with virtual interface and data downloading capability to analyzers operating NumaView software.

Specifications
Features
Applications
Options
Accessories
Standards
Videos

Features

Continuous, real-time PM10 and PM2.5 mass concentration results
Simple set-up and 10-minute warm up time
Superior measurement sensitivity and precision
Long autonomy and low power consumption
Low maintenance and cost of operation
US EPA-approved

Specifications

Performance
Measurement Principle	Broadband spectroscopy using 90° white-light scattering with Polychromatic LED
Particle size resolution	256 sizes over 0.18 – 20µm range, combined to 64 channels for mass calculation
PM Mass Measurements	PM10, PM2.5, and PM10-2.5 simultaneously
PM Mass Resolution Measurement Range	0.1 - 10,000 µg/m³
Mass Measurement & Display Resolution	0.1 µg/m³
Precision	±0.5 ug/m³ (1-hr average)
Lower Detectable Limit	<0.1 ug/m³ (1-hr average)
Data Rate	10s to 48hr (user selectable)
Mass Concentration Accuracy	Exceeds US EPA PM10 FEM and Class III FEM PM2.5 performance requirements for additive and multiplicative bias compared to FRM samplers
Flow Rate	5.0-lpm sample flow (Standard model); 11.67-lpm optional bypass flow (with option 640x)
Flow Accuracy	Within ±1%; (Typically within ±0.5%)
Operating Conditions
Operating Temperature	0 - 50°C, non-condensing
Ambient Temperature	-40 - 60°C
Ambient Relative Humidity	0 - 100%
Sample Humidity Control	24VDC, 90W (max) heater controlled to 35% RH
Weatherproof enclosure required with 0 - 50°C, non-condensing environmental control
Requires only 10-min warm-up time
Interfaces and Data Storage
T Series analyzer interface with full touch screen display and NumaView premium operating software and NumaView remote software
4Gb memory allows for > 1 year of internal data storage
Front Panel USB Ports	2x type-A Peripheral Ports
Ethernet Communication (supports TCP/IP Modbus and HTTP polling protocols)
Electrical
T640 instrument	100 - 230VAC 50/60Hz, Power consumption < 120W @ 120VAC
External pump (for optional bypass flow - option 640x)	100 - 120VAC 60Hz or 220-240VAC 50/60Hz, Power consumption <360W @ 120VAC
Physical Specifications
Unit dimensions (HxWxD)	7” x 17” x 14” (17.8 x 43.2 x 35.6 cm)
Unit weight	19 lbs (8.6 kg)
Sample heater tube height	43” (109 cm)
Sample heater tube weight	6 lbs (2.7 kg)
Certifications
US EPA PM2.5 Federal Equivalent Method EQPM-0516-236
US EPA PM2.5 Federal Equivalent Method EQPM-0516-238
US EPA PM10 Federal Equivalent Method EQPM-0516-239
US EPA PM10-2.5 Federal Equivalent Method EQPM-0516-240

Applications

Options

Accessories

Standards

Media

Teledyne API T640 PM Mass Monitor

Quote Add-Ons

RELATED PRODUCTS