Fluke 1550C Insulation Resistance Tester 5 kV
- Test voltages up to 5 kV provides solutions for all applications
- CAT III 1000 V, CAT IV 600 V safety rating
- Voltage breakdown detection alerts the user that voltage is present and gives the voltage reading up to 600 V ac or dc for increased user safety
Megger S1-1068 Insulation Resistance Tester
- Resistance measurement: 15 TΩ - 5 kV, 35 TΩ - 10 kV, 35 TΩ - 15 kV
- High current – 6 mA short circuit current
- High noise immunity – 8 mA of noise rejection
Megger S1-1568 Insulation Resistance Tester
- Resistance measurement: 15 TΩ - 5 kV, 35 TΩ - 10 kV, 35 TΩ - 15 kV
- High current – 6 mA short circuit current
- High noise immunity – 8 mA of noise rejection
Megger MIT1025 Diagnostic Insulation Resistance Tester
- Measures up to 20 TΩ
- PI, DAR, DD, SV and ramp test
- Improved productivity – operate from line power/mains if battery dead
Fluke 1625-2 GEO Earth Ground Tester
- 3- and 4-pole earth ground measurement
- 4-Pole soil resistivity testing
- 2-pole resistance measurement AC
High Voltage Ohm-Check Neutral Resistance Tester
- Cable to clamp-on meter, 10’
- Cables between reels & neutral, 10’
- Line cord 10’ & #2 Ground Cable, 20’
Megger MGFL100 Battery Ground Fault Locator
- Alarms when the real fault is identified
- Direct measurement of resistance and stray capacitance
- Direct measurement of fault current and leakage current
AEMC 6555 Digital Megohmmeter
- Wide measurement range from 10kΩ to 30TΩ
- Fixed or programmable test voltage from 40V to 10kV
- 5mA charging current
General Radio 1864 Megohmmeter
Megger MIT510 Insulation Resistance Tester 5 kV
- CAT IV 600 V
- Mains or battery powered
- Digital/Analogue backlit display
AEMC 5060 5000V Digital / Analog Megohmmeter
- True megohmmeter®
- Test voltage combinations of 500V, 1000V, 2500V and 5000V
- Insulation measurements from 30kΩ to 10,000GΩ (10TΩ)
Megger DET2/2
- High resolution – 1 mΩ
- High accuracy for earth electrode and soil resistivity testing
- A robust, versatile instrument with IP54 protection
AEMC 6470-B Ground Resistance Tester
- 4-Pole (4-Point) Fall-of-Potential measurement for very low resistance measurements with manual or automatic frequency selection and automatic lead compensation
- 3-Point Fall-of-Potential measurement
- 3-Point earth coupling measurement
Megger S1-1054/2 Insulation Resistance Tester 10 kV
- CAT IV 600 V
- Charge current: 5 mA
- 4 mA noise rejection and software filtering
Fluke 1555 Insulation Resistance Tester
- Test voltages of up to 10 kV
- Cat III 1000V, CAT IV 600V safety rating
- Voltage breakdown detection alerts the user that voltage is present and gives the voltage reading up to 600V AC or DC for increased user safety
Megger MIT2500 CAT IV Insulation Tester
- Insulation testing up to 2.5 kV and 200 GΩ range in a hand held instrument
- Guard terminal for high resistance accuracy
- Adjustable insulation test voltage from 50 V to 2500 V
AEMC 6470 Multi-Function Ground Resistance Tester
- 3-Point Fall-of-Potential measurement with manual or automatic frequency selection
- 3-Point earth coupling measurement
- Automatic frequency scan from 40 Hz to 513 Hz for optimum test accuracy in electrically noisy environments
AEMC 1060 1000V Megohmmeter
- True Megohmmeter
- Test voltage combinations of 50V, 100V, 250V, 500V and 1000V
- Insulation measurement to 4000GΩ (4TΩ)
Megger MIT525 Insulation Resistance Tester
- Industry best guard terminal accuracy
- Compact and lightweight for easy transport and use PI, DAR, DD, SV and ramp test
- Unique dual case design provides additional user protection
Megger MIT1020/2 10 kV Insulation Resistance Tester
- Increased measurement range to 35 Tera- ohms, in order to provide trending values for the best of insulating materials and highest capital equipment
- Expanded test voltage range from 50 V to 10 kV, in 10 V increments to 1 kV and 25 V increments above 1 kV
- Additional automated standardized tests to include Step Voltage, Dielectric Absorption Ratio and Dielectric Discharge tests
Fluke 1630 Earth Ground Clamp Meter
- A wide ground loop resistance range, from 0.025 Ω to1500 Ω, to satisfy all requirements
- Large jaw opening of 35 mm (1.38 in) for tests on ground conductors and/or equipotential bus bars
- Measurement of ground leakage current, from 0.2 mA to 1000 mA, without needing to disconnect - ideal for system troubleshooting
Fluke 1587 Insulation Multimeter
- Insulation test voltages 50 volts; 100 volts; 250 volts; 500 volts; 1,000 volts
- Live circuit detection prevents insulation test if voltage of more than 30 volts is detected
- Auto-discharge of capacitive voltage for added user protection
Phenix Technologies PAD-10-25 AC/DC Hipot Megohmmeter
- Lightweight, portable and enclosed in a rugged carrying case
- Large, easy to read meters
- Adjustable overcurrent trip point
Megger S1-5010 Diagnostic Insulation Tester
- High specification 5 kV tester
- Automatic test sequences
- PC control and display option
Megger MIT515 5 kV Insulation Resistance Tester
- Industry best guard terminal accuracy
- Compact and lightweight for easy transport and use PI, DAR, DD, SV and ramp test
- Unique dual case design provides additional user protection