Keithley 2182A Multimeter
- Make low noise measurements at high speeds, typically just 15nV p-p noise at 1s response time, 40–50nV p-p noise at 60ms
- Delta mode coordinates measurements with a reversing current source at up to 24Hz with 30nV p-p noise (typical) for one reading; averages multiple readings for greater noise reduction
- Synchronization to line provides 110dB NMRR and minimizes the effect of AC common-mode currents
Agilent 4349A 4-Channel High Resistance Meter
- Short: 11 ms
- Long: 31 ms
- 90 to 132 V or 198 to 264 V
Vitrek 4700 Precision High Voltage Meter
- Calibrates Hipot Testers, HV Power Supplies and Insulation Testers
- Basic Accuracy - 0.03% DC and 0.1% True RMS AC
- Color Touch Screen - Makes for Easy Measurement Selection and Display
Keysight 34465A Digital Multimeter, 6 ½ Digit, Truevolt DMM
- Visualize multiple measurements simultaneously
- Easily log data, screen shots and system state
- Rapidly prototype custom test sequences
Tektronix DMM4050 Digital Multimeter
- Volts, ohms, and amps measurements
- True RMS (AC, AC + DC) measurements
- Diode and continuity testing
Agilent 34410A Digital Multimeter, 6½ Digit
- 6.5 digit resolution
- 10,000 readings at 5.5 digit resolution
- 0.003% DC, 0.06% AC basic accuracy
Keithley 2016 Total Harmonic Distortion Multimeter
- THD, THD+Noise, and SINAD measurements
- 20Hz–20kHz sine wave generator
- Fast frequency sweeps
Fluke 87V True RMS Digital Multimeter
- Unique function for accurate voltage and frequency measurements on variable speed motor drives (VSDs)
- Atex 137 safety rating for use in zone 1 and zone 2
- CAT IV 600 V safety approval for non-Ex industrial environments
FLUKE 376 Digital AC/DC Clamp Multimeter
- iFlex® Flexible Current Probe expands the measurement range to 2500 A AC
- CAT IV 600 V, CAT III 1000 V
- True RMS AC voltage and current for accurate measurements on non-linear signals
Ross VMP200A HV Probe
GW Instek GDM-9061 Dual Measurement Multimeter
- 6 1/2 digit display: 1,200,000 counts
- 4.3" TFT graphic LCD
- DCV basic accuracy: 0.0035%(GDM-9061)/0.0075%(GDM-9060)
Keithley DMM7510 Precision Digital Multimeter
- Wide dynamic range for drain current consumption profiling of IoT products
- Precision multimeter with 7½-digit resolution
- Capture and display waveforms or transients with 1 MS/sec digitizer
Fluke 8588A Reference Multimeter
- 2.7 µV/V (95%), 3.5 µV/V (99%), 1 year relative accuracy, DC voltage without internal self-calibration or auto-adjustments
- 0.5 µV/V (95%), 0.65 µV/V (99%), 24 hour stability, DC voltage
- 7 µΩ/Ω (95%), 9 µΩ/Ω (99%), 1 year, resistance
Fluke 8558A 8.5-Digit Multimeter
- Voltage sensitivity to hundreds of nV and current sensitivity to hundreds of pA allows you uncover ultra-low level transient signals
- Up to 20 MHz bandwidth for voltage and 4 MHz for current retains high bandwidth content of the signal measured
- 18-bit SAR analog-to-digital converter that achieves 5 mega-samples per second
Fluke 8508A 8.5 Digit Reference Multimeter
- 8.5 Digit Resolution
- Frequency: 47 Hz to 63 Hz
- Consumption: 80 VA
Keithley 619 Electrometer/Multimeter
- Dual-channel & IEEE-488 options
- Full systems capability
- Electrometer sensitivity
Fluke 45 Dual Display Multimeter
- Multifunction vacuum fluorescent dual display
- True-RMS voltage and current (AC, DC)
- Frequency measurement to 1 MHz
Keysight 4339B High Resistance Meter
- Stable test fixtures: resistivity cell, component test fixture
- Test sequence programming
- Resistivity calculations
Keysight 3458A Multimeter
- 8.5 digit multimeter
- Up to 100,000 readings /s
- 0.0004% basic DCV accuracy
Keysight 34461A Digital Multimeter
- Color, graphical display with built-in bar chart, histogram, trend, math, and statistics
- I/O: USB, LAN/LXI, GPIB (optional)
- DMM Connectivity Utility software enables control, capture and views of your DMM's data on your PC or mobile device with a single click
Keysight 34420A NanoVolt, Micro-ohms Meter
- 7½ digits resolution
- 100 pV / 100 n ohms sensitivity
- 1.3 nVrms / 8 nVpp noise performance
Keysight 34411A Digital Multimeter, 6½ Digit
- 6½ digit resolution
- 50,000 readings/sec. @ 4 1/2 digits to the PC
- 1M reading memory
Keysight 34401A 6½ Digital Multimeter
- 6½ digit resolution
- 10 measurement functions: DC/AC voltage, DC/AC current, 2- and 4-wire resistance, diode, continuity, frequency, period
- Basic accuracy: 0.0035% DC, 0.06% AC
Fluke 279FC/IFLEX True-RMS Thermal Multimeter
- Check hot spots on high-voltage equipment and transformers, and detect heating of fuses, wires, insulators, connectors, splices, and switches
- Full-featured multimeter with a built-in thermal imager
- 15 measurement functions including voltage ac and dc, resistance, continuity, capacitance, diode test, Min/Max/Avg, and current ac with included iFlex current probe
Keithley 2015-P Audio Analyzing Digital Multimeter
- THD, THD+Noise, and SINAD measurements
- 20Hz–20kHz sine wave generator
- Fast frequency sweeps